Clears all manual lead-ins from every part on the active plate and
rebuilds the layout graphics.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Save/restore cutting parameters as JSON in user settings so values
survive between sessions. Add pierce clearance numeric input to the
CuttingParametersForm.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Scales down lead-ins that would place the pierce point too close to the
opposite wall of small holes. Uses quadratic solve to find the maximum
safe distance inside a clearance-reduced radius. Adds Scale() method to
all LeadIn types and applies clamping in both the strategy and the
interactive preview.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three issues caused incorrect rendering after lead-in application:
- Rapid move entities from ToGeometry() were included in ShapeProfile
contour detection, turning traversal paths into cutting moves
- Program created with Mode.Incremental default made the absolute-to-
incremental conversion a no-op, leaving coordinates unconverted
- AddProgramSplit didn't call StartFigure() at rapid moves, causing
GraphicsPath to draw implicit connecting lines between contours
- Part.Rotation returned 0 from the new program instead of the actual
rotation, displacing the sequence label on rotated parts
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Restructure the cutting parameters dialog with separate Lead-In and
Lead-Out GroupBoxes per tab, exposing editable length/angle/radius
fields for lead-outs (previously hardcoded). Add Tabs section with
enable checkbox and width control. Also fix lead-in/lead-out angle
calculations and convert cutting strategy output to incremental mode.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a text-only toolbar button to the Plates tab that opens the
CuttingParametersForm, saves the chosen parameters on the plate, and
runs LeadInAssigner with LeftSideSequencer to auto-assign lead-ins.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add GetGraphicsPaths/AddProgramSplit to GraphicsHelper that builds separate
GraphicsPath objects for cut vs lead-in/lead-out codes, skipping suppressed
codes. Update LayoutPart to use split paths when HasManualLeadIns is set,
drawing lead-in geometry in yellow regardless of selection state.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds LayerType.Leadout to all LinearMove and ArcMove instances produced
by LineLeadOut and ArcLeadOut Generate() methods.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds LayerType.Leadin to all LinearMove and ArcMove instances produced
by LineLeadIn, ArcLeadIn, LineArcLeadIn, CleanHoleLeadIn, and
LineLineLeadIn Generate() methods, plus tests covering all subclasses.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds Suppressed bool to the Motion base class so LinearMove, ArcMove,
and RapidMove can be flagged for skip during rendering and post-processing
when they fall within a tab gap. Clone() updated on all three subclasses
to preserve the flag. Covered by new MotionSuppressedTests.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add radius-based arc feedrate calculation (Variables/Percentages modes)
with configurable radius ranges (#123/#124/#125 or inline expressions)
- Fix arc distance in SpeedClassifier using actual arc length instead of
chord length (full circles previously computed as zero)
- Fix G89 P spacing: P now adjacent to filename per CL-707 manual syntax
- Add lead-out feedrate support (#129) and arc lead-in feedrate (#127)
- Fix pallet exchange: StartAndEnd emits M50 in preamble + last sheet only
- Add G121 Smart Rapids emission when UseSmartRapids is enabled
- Add G90 absolute mode to main program preamble alongside G20/G21
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add ArcFit.FitWithDualTangent to constrain replacement arcs to match
tangent directions at both endpoints, preventing kinks without
introducing gaps. Add DXF year selection to CAD converter export.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove pass-through wrappers (FitWithStartTangent, MaxRadialDeviation), extract
PerpendicularDistance and NormalizeAngle helpers to deduplicate mirror axis math,
convert GetExitDirection to switch expression, and simplify ComputeEndTangent.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Change Nest() to decide fill vs pack based on total area coverage
instead of qty != 1. Items covering < 10% of the plate are packed,
so large parts get prime position and small low-qty parts fill gaps.
Qty=2 items are placed as interlocking best-fit pairs in remnant
spaces after the main pack phase, rather than as separate rectangles.
- Add ShouldFill() capacity-based heuristic
- Split pack phase: regular items pack first, then pairs
- Add PlaceBestFitPairs() for Phase 3 remnant pair placement
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
For qty 1-2, skip the full 6-strategy pipeline: place a single part
or a best-fit pair directly. For larger low quantities, shrink the
work area in both dimensions (sqrt scaling with 2x margin) before
running strategies, with fallback to full area if insufficient.
- Add TryFillSmallQuantity fast path (qty=1 single, qty=2 best-fit pair)
- Add ShrinkWorkArea with proportional dual-axis reduction
- Extract RunFillPipeline helper from Fill()
- Make ShrinkFiller.EstimateStartBox internal with margin parameter
- Add MaxQuantity to FillContext for strategy-level access
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Break the 113-line click handler into single-responsibility methods:
RunAutoNestAsync, GetOrCreatePlate, NestSinglePlateAsync, and
CreatePreviewPlate (eliminates duplicated plate-cloning code).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Refresh PlateView preview with settled parts after Compactor.Settle
so the accepted layout matches what was shown, not the pre-settle
positions from the last progress report.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Skip ExtentsFillStrategy for rectangle/circle parts
- Skip PairsFillStrategy for circle parts
- PackBottomLeft now tries rotated orientation when items don't fit
- PackBottomLeft tries both area-descending and length-descending sort
orders, keeping whichever places more parts (tighter bbox on tie)
- Add user constraint override tests for AngleCandidateBuilder
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace RotationAnalysis.FindBestRotation with PartClassifier.Classify in
RunPipeline, propagate ClassificationResult through BuildAngles signatures and
FillContext.PartType, and rewrite AngleCandidateBuilder to dispatch on part type
(Circle=1 angle, Rectangle=2, Irregular=full sweep).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Covers all 9 cases: pure rectangle, rounded rectangle, rect with notch,
circle, L-shape, triangle, serrated edge (perimeter ratio), tilted rect
(primary angle), and empty drawing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
OffsetOutward now normalizes to CW winding before offsetting instead of
trial-and-error with bounding box comparison. CadConverterForm designer
regenerated with new entityView1 properties.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Route best-result updates to progress form preview in
PlateView.FillWithProgress (Ctrl+F path) — was still using
the old SetStationaryParts approach
- Only update results stats (parts, density, area) when
IsOverallBest so they match the preview display
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace verbose value tuple with named PartPair record struct, extract
AnchorToWorkArea/PairBbox helpers to eliminate duplication, and delegate
RepeatColumns to FillLinear.Fill which already handles geometry-aware
column tiling with overlap fallback.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Polygon-polygon collision detection using convex decomposition (ear-clipping
triangulation) followed by Sutherland-Hodgman clipping on each triangle pair.
Handles overlapping, non-overlapping, edge-touching, containment, and concave
polygons. Includes hole subtraction support for future use.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Immutable result type that holds overlap flag, overlap regions (as polygons),
intersection points, and computed overlap area.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
FillGrid had no overlap check after perpendicular tiling of the row
pattern (Step 2), unlike Step 1 which had one. When geometry-aware
FindPatternCopyDistance underestimated row spacing, overlapping parts
were returned unchecked.
Changes:
- Make FillLinear.HasOverlappingParts shape-aware (bbox pre-filter +
Part.Intersects) instead of bbox-only, preventing false positives on
interlocking pairs while catching real overlaps
- Add missing overlap safety check after Step 2 perpendicular tiling
with bbox fallback
- Add diagnostic Debug.WriteLine logging when overlap fallback triggers,
including engine label, step, direction, work area, spacing, pattern
details, and overlapping part locations/rotations for reproduction
- Add FillLinear.Label property set at all callsites for log traceability
- Refactor LinearFillStrategy and ExtentsFillStrategy to use shared
FillHelpers.BestOverAngles helper for angle-sweep logic
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
EllipseConverter computed arc radius from start point only, causing
~0.0009 unit gaps between consecutive arcs. Use circumcircle of
(start, mid, end) points so both endpoints lie exactly on the arc.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract shared BestFitAxis helper parameterized by orientation,
eliminating 23-line duplicate in rectangle packing.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
StripeFiller and FillExtents had identical 24-line overlap detection
methods; move to FillHelpers and delegate from both callers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract shared EvenlyDistribute helper parameterized by axis,
eliminating 27-line duplicate between the two methods.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The arc and line Optimize methods had identical merge-loop structure;
extract a generic MergePass helper with type-specific delegates.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Both ActionSelect and ActionZoomWindow had identical 29-line
GetRectangle methods; consolidate into the common base class.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The parameterless rotation is equivalent to rotating around (0,0),
so delegate to the origin overload to eliminate 30-line duplicate.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract shared FillAxis helper parameterized by orientation,
eliminating 34-line duplicate between horizontal and vertical fills.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move identical FitWithStartTangent and MaxRadialDeviation methods
to a shared ArcFit class, eliminating 40-line duplicate.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract shared SortStrips helper parameterized by axis selectors,
eliminating 61-line near-duplicate between column and row sorting.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Convex corners were being miter-joined (lines extended to a point)
because IntersectsUnbounded always finds an intersection for non-parallel
lines. Now checks the cross product of original line directions to detect
convex corners and inserts an arc instead.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Part.Intersects: filter intersection points at a vertex of either
shape (was both), so edge-touching parts are not flagged as overlapping
- NestEngineBase.HasOverlaps: use epsilon-based bounding box pre-filter
consistent with FillExtents and Plate.HasOverlappingParts
- PartGeometry.GetOffsetPartLines: remove extra chordTolerance added to
spacing offset — was causing 0.002" gap beyond the intended part spacing
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
UpdateEtchEntities was removing all entities on the ETCH layer, which
also deleted user-added etch marks like part numbers. Now tags generated
bend etch lines with a BendEtch tag and filters on that instead.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Place circle labels on the circumference using golden angle distribution
so concentric circles don't overlap. Hide labels when the entity is too
small on screen to fit the badge.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Labels are drawn at each entity's midpoint with a filled background
circle for readability. Toggle via "Labels" checkbox in the detail bar.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Etch marks for up bends are now real geometry entities on an ETCH layer
instead of being drawn dynamically. They flow through the full pipeline:
entities → FilterPanel layers → ConvertGeometry (tagged as Scribe) →
post-processor sequencing before cut geometry.
Also includes ShapeProfile normalization (CW perimeter, CCW cutouts)
applied consistently across all import paths, and inward offset support
for cutout shapes in overlap/offset polygon calculations.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Shape.OffsetOutward produces inward offsets for certain rotated polygons,
causing geometry-aware copy distances to be too small and placing
overlapping parts. Root cause is in the offset winding direction
detection — this commit adds safety nets while that is investigated.
- FillLinear.FillGrid: detect bbox overlaps after geometry-aware tiling,
fall back to bbox-based spacing when overlaps found
- FillExtents.RepeatColumns: detect overlaps after Compactor computes
copy distance, fall back to columnWidth + spacing
- PairFiller/StripeFiller remnant fills: use FillLinear directly instead
of spawning full engine pipeline (avoids strategies with the bug)
- Add PairOverlapDiagnosticTests reproducing the issue
- MCP config: use shadow-copy wrapper for dev hot-reload
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
High-utilization pairs (>=75%) are no longer discarded for exceeding
the aspect ratio limit, since the material isn't being wasted.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Wires the OpenNest.Data layer into the UI: adds project reference, creates MachineConfigForm (tree-based editor for machines/materials/thicknesses with import/export), and adds Tools > Machine Configuration... menu item.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Embeds CL-980.json as a resource in OpenNest.Data and adds EnsureDefaults()
to LocalJsonProvider, which seeds the machines directory on first run when empty.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
One JSON file per machine named by GUID, stored in a configurable directory.
Supports save, load, list (as summaries), and delete with IO-error retry.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Parts tab: shows all BOM items, editable Material/Thickness for
matched rows, grayed-out rows for items without DXF files
- Groups tab: auto-computed from parts with editable Plate Width/Length
per material+thickness group
- Editing Material/Thickness on Parts tab immediately re-groups
- Per-group plate sizes preserved across re-groups
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Fill must be at index 0 (front) so it's processed last by the
docking layout engine. Edge docks at higher indices process first.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
AutoSize with Dock.Fill child causes circular sizing and collapses
the GroupBox. Use fixed Height=200 instead.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replaced absolute-positioned controls with TableLayoutPanel in the input
section and Dock-based layout for bottom buttons. Fixes controls being
hidden at non-100% DPI scaling.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add Fill control last so edge-docked controls get space first
- Remove stale hardcoded Location on bottom panel
- Switch to Sizable border with MinimumSize so user can resize
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fix critical: use MdiParentForm (custom property) instead of MdiParent
(WinForms property) in ImportBom_Click to avoid InvalidOperationException
- Add null guard in CreateNests_Click
- Set Drawing.Material from BOM group
- Move DxfImporter creation outside loop
- Improve summary label text with reason descriptions
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Task 9: CreateNests_Click validates plate dimensions, then for each
MaterialGroup creates a Nest with name '{job} - {thickness} {material}',
sets PlateDefaults (size, thickness, material, quadrant=1, spacing),
imports each matched DXF via DxfImporter, converts entities to Program
with leading RapidMove offset handling (same pattern as CadConverterForm),
sets Quantity.Required from BOM qty, then opens an EditNestForm for each
nest that has drawings. Summary MessageBox reports count and import errors.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add argument validation to EllipseConverter.Convert for tolerance and
semi-axis parameters. Narrow bare catch in Extensions.cs spline method
to log via Debug.WriteLine. Remove unused lineCount variable from
SolidWorksBendDetectorTests.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add EllipseConverter static class with foundational methods for converting
ellipse parameters to circular arcs: EvaluatePoint, EvaluateTangent,
EvaluateNormal, and IntersectNormals. All 8 unit tests pass.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a file is loaded, a background task analyzes the entities for
simplification candidates and highlights the Simplify button with a
count when candidates are found. Button resets after simplification
is applied.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
OptionsForm now shows checkboxes for each fill strategy, persisted via
the new DisabledStrategies user setting. FillStrategyRegistry exposes
AllStrategies and DisabledNames for the UI. MainForm applies disabled
strategies on startup via OptionsForm.ApplyDisabledStrategies().
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ajandClaude Opus 4.6