Creates PolygonHelper.cs in OpenNest.Engine.BestFit with ExtractPerimeterPolygon
(returning PolygonExtractionResult with polygon + correction vector) and RotatePolygon.
AutoNester.ExtractPerimeterPolygon and RotatePolygon become thin delegates.
Adds MakeSquareDrawing/MakeLShapeDrawing to TestHelpers and 6 PolygonHelperTests.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
In strip mode, build candidate list entirely from pairs whose
ShortestSide fits the narrow work area dimension, sorted by
estimated tile count. Previously, the top-50 utilization cut
ran first, excluding good strip candidates like #183.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove NeedsSweep that triggered a 5-degree sweep (36 angles) when
the work area was narrower than the part. Position matters more than
angle for narrow areas, and the base angles (bestRotation + 90deg)
cover the useful cases. ForceFullSweep still works for training.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Normalize pair bounding box to landscape (width >= height) in
PairEvaluator for consistent display and filtering. Fix
BestFitViewerForm where BoundingWidth/BoundingHeight were passed
in the wrong order to the plate Size constructor.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add Compactor.Settle and AutoNester.Optimize post-passes to
NestEngineBase.Nest, StripNestEngine, and PlateView.FillWithProgress
so all fill paths benefit from geometry-aware compaction.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add Optimize method that re-places parts using NFP-based BLF, keeping
the result only if it improves density without losing parts. Fix
perimeter inflation to use correct offset side. Add NfpNestEngine
that wraps AutoNester for the registry. Register NFP engine.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add Settle method that repeatedly pushes parts left then down until
total movement falls below a threshold. Replaces manual single-pass
push calls for more consistent gap closure.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Refactor BLF to compute NFP paths as Clipper PathsD with offsets
instead of translating full polygons. Add spatial pruning to skip
NFPs that don't intersect the IFP bounds. Clamp placement points
to IFP bounds to correct Clipper2 floating-point drift. Add
progress reporting to simulated annealing. Add debug logging.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move PlacedPart to its own file. Replace tuple-based sequences with
SequenceEntry struct for clarity. Add IProgress parameter to
INestOptimizer. Add IFP caching to NfpCache to avoid recomputing
inner fit polygons for the same drawing/rotation/workArea.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
PairFiller now returns PairFillResult (Parts + BestFits) instead of
using a mutable BestFits property. Extracted EvaluateCandidates,
TryReduceWorkArea, and BuildTilingAngles for clarity. Simplified the
candidate loop by leveraging FillScore comparison semantics.
Removed FillRemainingStrip and all its helpers (FindPlacedEdge,
BuildRemainingStrip, BuildRotationSet, FindBestFill, TryFewerRows,
RemainderPatterns) from FillLinear — these were a major bottleneck in
strip nesting, running expensive fills on undersized remnant strips.
ShrinkFiller + RemnantFiller already handle space optimization, making
the remainder strip fill redundant.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
StripNestEngine was passing progress directly to DefaultNestEngine.Fill
inside the ShrinkFiller loop, causing every per-angle/per-strategy report
to update the UI with overlapping layouts in the same work area.
Now inner fills are silent (null progress) and ShrinkFiller reports its
own progress when the best layout improves. IterativeShrinkFiller tracks
placed parts across items and includes them in reports. The trial box is
reported before the fill starts so the work area border updates immediately.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When the first pair candidate places more parts than needed (e.g., 17
when target is 10), sort by BoundingBox.Top, trim from the top until
exactly targetCount remain, and use that Top as the new work area
height. All subsequent candidates fill this smaller area, dramatically
reducing fill time.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a target count is known, ShrinkFiller now uses FillBestFit (fast
rectangle packing) to estimate how many parts fit on the full area,
then scales the shrink axis proportionally to avoid an expensive
full-area fill. Falls back to full box if estimate is too aggressive.
Also shrinks to targetCount (not full count) to produce tighter boxes
when fewer parts are needed than the area can hold.
IterativeShrinkFiller passes NestItem.Quantity as the target count.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
PairEvaluator already computes OptimalRotation via RotatingCalipers on
the pair's convex hull, but PairFiller.EvaluateCandidate only passed
hull edge angles to FillPattern. Now includes the optimal rotation
angle (and +90°) so tiling can use the mathematically tightest fit.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Both types were only used internally by the old StripNestEngine.Nest
strip-orientation logic, which has been replaced by IterativeShrinkFiller.
No references remain outside of these files.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces the old orientation-based strip nesting (TryOrientation,
SelectStripItemIndex, EstimateStripDimension, ShrinkFill helpers) with
a call to IterativeShrinkFiller.Fill for multi-quantity items, plus a
RemnantFinder-based PackArea pass for singles and leftovers.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduces IterativeShrinkFiller.Fill, which composes RemnantFiller and
ShrinkFiller by wrapping the caller's fill function in a closure that tries
both ShrinkAxis.Height and ShrinkAxis.Width and picks the better FillScore.
Adds IterativeShrinkResult (Parts + Leftovers). Covers null/empty inputs and
single-item placement with three passing xUnit tests.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Kept using OpenNest.Api in Timing.cs and EditNestForm.cs alongside
remote's reorganized usings and namespace changes.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- NestRunner now assigns Material to plates from request.Material
- NestResponse.LoadAsync uses descriptive exceptions instead of null-forgiving operators
- Fix pre-existing FillExtents.Fill signature mismatch (add bestFits parameter)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract magic numbers into named constants (MaxTopCandidates,
EarlyExitMinTried, etc.), extract candidate evaluation into
EvaluateCandidate method, and expose BestFits property so
PairsFillStrategy can reuse without redundant BestFitCache call.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The pattern bounding box already computes max(upper) - min(lower), so the
manual loop was redundant. Extract the N×N pair distance loop into a static
FindMaxPairDistance helper. Drop pre-cached edge arrays since GetEdges()
returns stored references with zero allocation.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Also fix missing using for FillHelpers in FillLinear and FillExtents,
and update callers (CompactorTests, PatternTileForm) for the new
Vector parameter.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move known-good pruning check before sweep/ML to avoid wasted work,
extract ContainsAngle, NeedsSweep, AddSweepAngles, ApplyMlPrediction,
and BuildPrunedList so Build reads as a clear pipeline.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
FillExtents vertical copy distance was not clamped, allowing rows to be
placed overlapping each other when slide calculations returned large
values. Clamp to pairHeight + partSpacing minimum, matching FillLinear.
Also add FillStrategyRegistry.SetEnabled() to restrict which strategies
run — useful for isolating individual strategies during troubleshooting.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Single-part group fills now delegate to Fill(NestItem) which runs
the full strategy pipeline, eliminating ~70 lines of duplicated
manual phase logic. Multi-part group fills retain the linear
pattern fill (unique to multi-part groups).
PairFiller now references FillHelpers directly instead of
bouncing through DefaultNestEngine helper methods.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move AutoNester, BottomLeftFill, NfpCache, SimulatedAnnealing,
and INestOptimizer/NestResult to OpenNest.Engine.Nfp. These are
not yet integrated into the engine registry.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move fill algorithms to OpenNest.Engine.Fill namespace:
FillLinear, FillExtents, PairFiller, ShrinkFiller, Compactor,
RemnantFiller, RemnantFinder, FillScore, Pattern, PatternTiler,
PartBoundary, RotationAnalysis, AngleCandidateBuilder, and
AccumulatingProgress.
Move strategy layer to OpenNest.Engine.Strategies namespace:
IFillStrategy, FillContext, FillStrategyRegistry, FillHelpers,
and all built-in strategy implementations.
Add using directives to all consuming files across Engine, UI,
MCP, and Tests projects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
DefaultNestEngine.Fill(NestItem, ...) now delegates to RunPipeline
which iterates FillStrategyRegistry.Strategies in order.
Removed: FindBestFill, FillRectangleBestFit, QuickFillCount.
Kept: AngleCandidateBuilder, ForceFullAngleSweep, group-fill overload.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Wraps FillLinear in an IFillStrategy, sweeping all AngleCandidates
from SharedState (falling back to 0° and 90°) in both directions and
recording AngleResults for UI inspection.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Wraps FillExtents in an IFillStrategy, trying both bestRotation and
bestRotation+90° angles and picking the better result. Reads
BestFits from SharedState (populated by PairsFillStrategy) to allow
FillExtents to search the best-fit cache for improved pair geometry.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Wraps FillBestFit rectangle packer in an IFillStrategy so the rect
best-fit phase participates in the pluggable pipeline.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Wraps PairFiller in an IFillStrategy so the pairs phase participates
in the pluggable pipeline. Stores BestFitResults in SharedState for
downstream strategies (Extents) to reuse.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
