Size(width, length) maps Width to vertical and Length to horizontal in
PlateView, but BoundingWidth (the longer dimension) was being passed as
Width (vertical) instead of Length (horizontal), causing the bounding
box to appear portrait instead of landscape.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Prevent InvalidOperationException when the timer fires before or
after the control handle is available.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Normalize pair bounding box to landscape (width >= height) in
PairEvaluator for consistent display and filtering. Fix
BestFitViewerForm where BoundingWidth/BoundingHeight were passed
in the wrong order to the plate Size constructor.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add Compactor.Settle and AutoNester.Optimize post-passes to
NestEngineBase.Nest, StripNestEngine, and PlateView.FillWithProgress
so all fill paths benefit from geometry-aware compaction.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add SelectionChanged event to PlateView and display the selected part's
location and size in a new status bar label. Shows combined bounding box
when multiple parts are selected.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add drawing dropdown to switch between drawings without reopening the
form. Change color scheme to light backgrounds with blue/red part fills
and auto-detect text color. Fix swapped bounding box width/length. Run
best-fit computation on a background thread so the UI stays responsive
during long calculations, with cancellation on drawing switch.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add third row (5x3 grid, 15 items/page), remove 50-result cap so all
candidates are pageable, start maximized, replace page label with
editable textbox for direct page entry, center nav controls, and
eliminate flicker on page change via DoubleBuffered + WM_SETREDRAW.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Draw only one set of preview parts at a time — active (current strategy)
takes precedence over stationary (overall best). Also clears active
parts when setting new stationary parts to prevent stale previews.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Kept using OpenNest.Api in Timing.cs and EditNestForm.cs alongside
remote's reorganized usings and namespace changes.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Relocates CutParameters from OpenNest namespace to OpenNest.Api, adds
LeadInLength and PostProcessor properties, and provides a typed Default
factory. Updates Timing.cs, the WinForms project reference, and the three
consuming forms to resolve the type from the new namespace.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move PlateViews and labels to designer file so they show in VS.
Fix nest orientation by swapping Box(Width,Length) to Box(Length,Width)
matching plate convention (Length=X, Width=Y). Add ComboBox Format
handler to show Drawing.Name. Zoom to fit after moving parts.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace SetTemporaryParts/ClearTemporaryParts/AcceptTemporaryParts in all
three progress callbacks (RunAutoNest, FillPlate, FillArea) with the new
two-bucket API: SetStationaryParts for IsOverallBest updates,
SetActiveParts for transient updates, AcceptPreviewParts(parts) and
ClearPreviewParts for completion. Also removes the now-redundant
highWaterMark guards from FillPlate_Click and FillArea_Click.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace single temporaryParts list with stationaryParts (overall best,
full opacity) and activeParts (current strategy, reduced opacity).
Update SetPlate, Refresh, UpdateMatrix, DrawParts, and FillWithProgress
accordingly. Replace SetTemporaryParts/ClearTemporaryParts/AcceptTemporaryParts
with SetStationaryParts/SetActiveParts/ClearPreviewParts/AcceptPreviewParts.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Also fix missing using for FillHelpers in FillLinear and FillExtents,
and update callers (CompactorTests, PatternTileForm) for the new
Vector parameter.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Promotes btnRemovePlate to a field and toggles Enabled based on
plate count in add/remove event handlers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
DensityBar: clamp rounded rect radius for small fill widths to avoid
GDI+ artifacts at very low density values.
PhaseStepperControl: use float arithmetic for circle spacing to
handle DPI-scaled widths evenly.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move fill algorithms to OpenNest.Engine.Fill namespace:
FillLinear, FillExtents, PairFiller, ShrinkFiller, Compactor,
RemnantFiller, RemnantFinder, FillScore, Pattern, PatternTiler,
PartBoundary, RotationAnalysis, AngleCandidateBuilder, and
AccumulatingProgress.
Move strategy layer to OpenNest.Engine.Strategies namespace:
IFillStrategy, FillContext, FillStrategyRegistry, FillHelpers,
and all built-in strategy implementations.
Add using directives to all consuming files across Engine, UI,
MCP, and Tests projects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace single preview PlateView with two stacked previews showing
horizontal and vertical FillLinear results. Each has a label showing
the part count. Apply uses the direction with more parts.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add Vector-based overloads to SpatialQuery (ray casting, edge distance,
directional gap, perpendicular overlap) and PartGeometry (directional
line filtering) to support pushing parts along any angle, not just
cardinal directions.
Add Compactor.PushBoundingBox for fast coarse positioning using only
bounding box gaps. ActionClone shift+click now uses a two-phase strategy:
BB push first to skip past irregular geometry snags, then geometry push
to settle against actual contours.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add FileExtension and FileFilter constants to NestFormat and update all
references across Console, MCP, Training, and WinForms projects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The Size fix (d4222db) changed Size.Width to Y axis and Size.Length to
X axis but only updated DrawPlate/LayoutViewGL. BoundingBox, WorkArea,
rotations, DXF export, and engine code still used the old Width=X
convention, causing the fill engine to get a swapped work area (60x120
instead of 120x60) and parts to fill in the wrong direction.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Size.Parse and ToString now use WxL format (width first) matching the
natural convention. Fixed the Plate(w,l) constructor which was swapping
args when creating Size. Fixed PlateView.DrawPlate and DrawControl
ZoomToArea which had width/length mapped to the wrong screen axes.
Simplified Console --size parsing to use Size.TryParse instead of manual
split with confusing PlateHeight/PlateWidth fields. Added Command-Line
Interface section to README documenting all console options.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Relocated add and remove plate buttons from the Plates tab toolstrip
to the right side of the plate header, keeping plate actions together.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Plate nav buttons (first/prev/next/last) now sit in a centered header
bar above the PlateView with a plate info label on the left, making
navigation more accessible without reaching up to the main toolbar.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a toolbar button that opens a dockable remnant viewer showing
tiered remnants (priority, size, area, location) with color-coded
overlay rendering on the plate view.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Compute the label point from the base drawing's unrotated program
and rotate the cached point instead of recomputing on each rotation.
Prevents label jitter caused by arc discretization differences.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace PathPoints[0] label positioning with polylabel algorithm
to place part ID labels at the visual center of each part. Labels
are now centered and readable even in dense nests.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Parts created by fill operations share a Program instance via
CloneAtOffset. RotateSelectedParts called Part.Rotate on each,
compounding Program.Rotate on the shared object (1x, 2x, 3x…)
and producing inconsistent bounding boxes. Fix tracks rotated
programs with a HashSet, rotates locations around the group center,
and anchors the bounding box corner to prevent drift.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace the single-pass guillotine split approach with RemnantFinder-based
iteration. After each fill, re-discover all free rectangles and try all
remaining items again until no more progress is made. This fills gaps that
were previously left empty after the initial strip + remainder layout.
Also change ActiveWorkArea border color from orange to red.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The sequencer returns parts ordered from exit point inward. Reverse
so part 1 is nearest the origin and cutting works outward.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Advanced sequencer with default 0.25 MinDistanceBetweenRowsColumns
puts every part in its own row, degenerating to a Y-sort. Switch to
LeastCode (nearest-neighbor + 2-opt) for visible results.
Also replace AddRange(linq) with foreach+Add to avoid ObservableList
AddRange re-enumerating a deferred LINQ query for event firing.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace old SequenceByNearest with PartSequencerFactory using default
SequenceParameters (Advanced method with serpentine row grouping).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
