The second delta review compared the filtered checks with the previous
implementation on 5,400 generated cases. Rapid checks matched in every
case, but 114 lead checks differed: a long lead passing a small circle
or arc well over 0.001 away was reported clear, while the native
line/circle query, through rounding in its squared terms, reports a
contact there. A coordinate limit and a fixed margin cannot bound that
cancellation.
Lead checks therefore examine every other part's material again,
exactly as before the filter; LeadMaterialSnapshot no longer keeps an
extent. Rapid checks, including the pre-post review's, keep skipping
completed contours more than 0.001 clear of the rapid. The 900000-long
lead beside a radius-0.0001 circle is a regression test.
Planning a dense 144-part grid now takes about 19 s again (lead checks
dominate); a new part order is still found where the old search gave
up.
The delta review found two more ways the extent filter could skip a
check a native query would have flagged:
- Native line intersections accept points 0.00001 outside each line's
bounding box, so a lead 0.000003 from another part touched it while
their extents were 0.000003 apart, beyond the 1e-6 margin.
- Around a circle of radius 5e11, rounding let the native query count
a rapid at x = -0.00001 as touching although the circle's extent
started at x = 0; the margin scaled only with the rapid's own size.
Rather than chase each tolerance, the filter now has one narrow rule:
Extent.IsClearOf skips only when both extents are finite, lie within
1e6 and are more than 0.001 apart on some axis. 0.001 is ten times the
widest absolute band of any native contact query (the 0.00001 box
allowance and the 0.0001 contact reach of tiny arcs), and within 1e6
rounding stays far below it. Larger geometry is always checked in
full, as before the filter. Planning speed is unchanged (144-part grid
about 0.5-0.8 s).
All three reproductions are regression tests, with a test of the rule
itself.
Every lead was checked against every placed part's material and every
rapid against every completed contour, so each check cost O(parts) and
planning a plate cost O(parts^2). Lead checks were 88% of planning time
on a 144-part grid.
LeadMaterialSnapshot and each completed contour now keep a conservative
extent (an arc counts as its whole supporting circle). A lead or rapid
skips material or a contour only when the extents are farther apart
than 1e-6 x (1 + coordinate size), far above the contact tolerance, so
results are unchanged: anything touching or closer still gets the full
native check. The rapid filter also applies to pre-post verification,
which shares ReleasedContourState.
New tests cover the cases just inside the skip: an arc lead and a
completed arc whose bulge reaches past their endpoints, and a lead and
a rapid that only touch another part's extent.
aj