Add argument validation to EllipseConverter.Convert for tolerance and
semi-axis parameters. Narrow bare catch in Extensions.cs spline method
to log via Debug.WriteLine. Remove unused lineCount variable from
SolidWorksBendDetectorTests.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Geometry Simplifier:
- Replace least-squares circle fitting with mirror axis algorithm
that constrains center to perpendicular bisector of chord, guaranteeing
zero-gap endpoint connectivity by construction
- Golden section search optimizes center position along the axis
- Increase default tolerance from 0.005 to 0.5 for practical CNC use
- Support existing arcs in simplification runs (sample arc points to
find larger replacement arcs spanning lines + arcs together)
- Add tolerance zone visualization (offset original geometry ±tolerance)
- Show original geometry overlay with orange dashed lines in preview
- Add "Original" checkbox to CadConverter for comparing old vs new
- Store OriginalEntities on FileListItem to prevent tolerance creep
when re-running simplifier with different settings
Bend Detection:
- Propagate bend notes to collinear bend lines split by cutouts
using infinite-line perpendicular distance check
- Add bend note text rendering in EntityView at bend line midpoints
DXF Import:
- Fix trimmed ellipse closing chord: only close when sweep ≈ 2π,
preventing phantom lines through slot cutouts
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
DxfImporter now filters ETCH entities (like BEND) since etch marks are
generated from bends during export, not cut geometry. GeometryOptimizer
no longer merges lines/arcs across different layers and preserves layer
and color on merged entities. EntityView draws etch marks directly from
the Bends list so they remain visible without relying on imported ETCH
entities.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
DrawingSplitter now clips bend lines to each piece's region using
Liang-Barsky line clipping and offsets them to the new origin. Bend
properties (direction, angle, radius, note text) are preserved through
the entire split pipeline instead of being lost during re-import.
CadConverterForm applies the same origin offset to bends before passing
them to the splitter, and creates FileListItems directly from split
results to avoid re-detection overwriting the bend metadata.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
BEND layer lines were being imported as cut geometry alongside the
separate Bend object detection, causing duplicate dark lines in nests.
Skip BEND layer entities in DxfImporter since bend detection reads
directly from the raw CadDocument.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ConvertProgram.ToGeometry() created entities without setting Color,
defaulting to Color.Empty (alpha=0). After ededc7b switched from
Pens.White to per-entity colors, these rendered fully transparent.
- Add explicit colors to all SpecialLayers (Cut=White, Rapid=Gray, etc.)
- Set entity Color from layer in ConvertProgram for lines, arcs, circles
- Add GetEntityPen fallback: treat Empty/alpha-0 as White
- Add bend line rendering and selection in EntityView/CadConverterForm
- Fix SolidWorksBendDetector MText formatting strip for bend notes
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Introduces a pluggable bend detection system in OpenNest.IO.Bending:
- IBendDetector takes CadDocument directly to preserve MText/layer/linetype info
- SolidWorksBendDetector finds lines on BEND layer with CENTER linetype and matches nearby MText notes
- BendDetectorRegistry auto-registers SolidWorks detector and supports AutoDetect
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add MaterialLibraryResolver for Cincinnati post processor to resolve
G89 library files from material/thickness/gas configuration
- Add Nest.AssistGas property with serialization support in nest format
- Add etch library support with separate gas configuration
- Fix CutOff tests to match AwayFromOrigin default cut direction
- Fix plate info label not updating after ResizePlateToFitParts
- Add cutoff and remnants toolbar button icons
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Wire IDistanceComputer into RotationSlideStrategy, replacing inline
CPU/GPU branching. BestFitFinder constructs the appropriate implementation.
Replace PushDirection enum with direction vectors in BuildOffsets.
Rename IBestFitStrategy.Type and PairCandidate.StrategyType to StrategyIndex
for clarity (JSON field name unchanged for backward compatibility).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Kept using OpenNest.Api in Timing.cs and EditNestForm.cs alongside
remote's reorganized usings and namespace changes.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a Write(Stream) overload that writes the ZIP archive to any stream
with leaveOpen: true so the caller can read back a MemoryStream after
the ZipArchive is disposed. Refactors Write(string) to delegate to the
new overload.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add FileExtension and FileFilter constants to NestFormat and update all
references across Console, MCP, Training, and WinForms projects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The Size fix (d4222db) changed Size.Width to Y axis and Size.Length to
X axis but only updated DrawPlate/LayoutViewGL. BoundingBox, WorkArea,
rotations, DXF export, and engine code still used the old Width=X
convention, causing the fill engine to get a swapped work area (60x120
instead of 120x60) and parts to fill in the wrong direction.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add verbose per-file and per-sheet-size console output during collection
- Skip already-processed parts at the sheet-size level instead of all-or-nothing
- Precompute best-fits once per part and reuse across all sheet sizes
- Clear best-fit cache after each part to prevent memory growth
- Save best-fits in separate bestfits/ zip entries instead of embedding in nest.json
- Filter to Keep=true results only and scope to plate sizes in the nest
- Set nest name to match filename (includes sheet size and part count)
- Add TrainingDatabase with per-run skip logic and SQLite schema
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
"Length" is more natural than "height" for flat plate materials.
Renames the field on OpenNest.Geometry.Size, Box.Height property,
and all references across 38 files.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Rename SizeDto.Height to SizeDto.Length so the serialized JSON
uses "width"/"length" which is more natural for plate materials.
The core Size struct still uses Height internally.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace three separate XML metadata files (info, drawing-info,
plate-info) and per-plate G-code placement files with a single
nest.json inside the ZIP archive. Programs remain as G-code text
under a programs/ folder.
This eliminates ~400 lines of hand-written XML read/write code
and fragile ID-based dictionary linking. Now uses System.Text.Json
with DTO records for clean serialization. Also adds Priority and
Constraints fields to drawing serialization (previously omitted).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move DxfImporter, DxfExporter, NestReader, NestWriter, ProgramReader,
and Extensions into a new OpenNest.IO class library. The WinForms project
now references OpenNest.IO instead of ACadSharp directly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
