The grid was added to check the whole library for drawings that freeze
a preview; it is a testing tool, not an operator feature. The form and
its test stay for future library checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Drawing Library Grid check found seven drawings with 1,000-1,700
holes (90-6138-26/27, Reeves bakery vent pans, 4938 A15) that took
0.5-3.6 s to preview, all of it in the part label point.
- PolyLabel skips a hole's containment test outside its bounds and its
edge distances when its bounds are farther than the nearest edge so
far. Both skips leave the result exactly as before; label points on
all seven drawings are unchanged and the search is 4-35x faster.
- ShapeBuilder.GetShapes rescanned every remaining entity at each
chaining step. An endpoint grid now finds the candidates, tested in
list order with the same checks, so chosen entities, reversals and
shapes are identical (compared against the old loop on the library
drawings and 300 random entity soups). 90-6138: 700 ms -> 40 ms.
- The label builds its shapes once: ShapeProfile.FromShapes reuses the
ones it already chained instead of chaining them again.
Previews of all seven now take 57-166 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Drawing Library Grid shows a page of library drawings side by
side. Check All Pages walks every page, downloading each drawing, timing
its label search without the paint's cell budget on a worker with a
10 s limit, then timing its paint, and lists drawings that fail, run
slow or would freeze a preview. It was added to confirm no other library
drawing hangs on load the way the twin-outline drawing did: a run over
all 40,757 drawings on the work server found no hangs or failures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A drawing of two equal, separate outlines (RC-204441A23 PT13) froze the
drawing library preview. ShapeProfile takes one outline as the perimeter
and the other as a cutout, so the net area is rounding noise and
ThicknessPrecision fell to 1e-9. A rectangle's pole is a whole ridge, so
the label search refined it into billions of cells on the UI thread.
Net area negligible next to the outline now falls back to the outline's
own width, and the paint-time label search has a cell budget so no shape
can stall painting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing list only showed nest-wide totals, so seeing how many of a
drawing a layout holds meant counting parts by eye. Prefix the nested
line with the current plate's count, e.g. "[78] 144 of 1 nested".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Long fills read as thousands of milliseconds. Keep milliseconds under
a second, then show seconds and minutes so the time stays readable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An empty canvas corner gave no sign of whether a check was still running,
which matters on large nests. A Layout section beside utilization now
follows the automatic check: checking, OK, or findings in red, with the
full wording in its tooltip. It has its own label so rechecks never
replace the last command's status text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drop the check mark: a clear result, and an automatic recheck after one,
now draw nothing. Findings and failed, canceled or incomplete checks keep
their text, and views without automatic rechecks keep their pending text.
The status bar still reports a manual check's result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pending or running recheck no longer swaps the green check for status
text. A clear result stays as a gray check, and earlier findings stay as
dimmed text, neither of which claims anything about the edited layout.
Views without automatic rechecks still ask for a manual check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The overlap check now runs the pre-post part spacing scan on its snapshot,
so the canvas label and posting agree. Too-close pairs are counted in the
label and marked with an orange ring showing the gap, with hover details.
A fully checked plate with no findings draws a green check instead of
text; the status bar keeps the wording. Changing the plate's part spacing
now stales the report, and repeated parts share one offset outline so
automatic rechecks stay fast.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"Fill" said nothing about what the engine does, since every engine fills.
It is now Lattice, and Fill stays an alias, so saved selections, scripts
and API requests keep working. Engine descriptions are rewritten in plain
language and shown beside each name in the desktop engine lists; the main
toolbar's tooltip also says when Fill Area falls back to Lattice.
Docs also cover the leftover placement from the previous commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
F1 opening help kept taking over from placing a part. Help stays on
the Help menu and F1 belongs to the Clone tool alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate commands need an open nest and no running job; Trim/Extend Cut-Off
needs a cut-off on the plate and Sequence by Path needs two parts. The
Plate menu's Trim/Extend item follows the same rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A visual review of the toolbar set found the magnifiers heavier than the
cut icons' outlines, Zoom To Fit's small square ambiguous and Zoom To
Area crowded at 24 px. Thin the ring and handle, let Fit's sheet fill the
glass edge to edge, and give Area longer dashes and a smaller corner lens.
The header gets a fourth zoom button that starts the existing Zoom Window
action, with a matching dashed-window icon also shown on View > Zoom To >
Area. It stays out of the inspection's live zoom controls: inspection owns
Escape, so a zoom window could not be cancelled there.
Redraw Zoom In, Zoom Out and Zoom To Fit in the cut planner and cut-off
palette: slate magnifier, pale glass, the card's 1px shadow, orange +/-
and a part-blue sheet for Fit.
Clone's Delete only removed its source parts, so parts picked with
Select All stayed on the plate until Escape ended the action.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Windows reposts a mouse move when a dialog opens or closes, so Set
Offset Increment threw away arrow-key nudges by snapping the previews
back to the cursor. Only a real cursor move now moves them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Show Original drew nothing until Simplify ran, and then showed entities that
had already been through import cleanup. The importers now capture the
entities before any optimization and the overlay draws those from load, while
Simplify keeps starting from the cleaned entities.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing library, drawing sets, saved nests, add-release and edit-set
grids each repeated the left-click header check that sorts on the
server. BrowsePager.SortByHeaderAsync now does it for the grid and
session it already drives. No behavior change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MachineConfigForm and SavedNestsForm built their tab pages, and
CuttingPanel and LeadsEditor their label / input / hint grids, with
identical private helpers. Both now use ControlFactory. No behavior
change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HorizontalLine and VerticalLine had identical constructors, Dispose and
resize handling. They now derive from SeparatorLine and only say which
way the line runs. No behavior change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Share the nest server client setup and page validation, entity endpoints,
post marker checks and the repeated desktop list, cut-time and busy-warning
code. Persistence tests use NestArchiveJson. No behavior change intended.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A closed contour around its center with at least 270 degrees of arc on
one center and radius now counts as a keyed hole, in its own row after
round holes of that diameter. Curved slots stay out: their long arcs wrap
around solid material, so the center is outside the contour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A nest with no material, grade or thickness now takes them from the
library record instead of warning that the drawing differs and dropping
its cut pins. The machine's spacing and cut-off settings follow. Later
drawings still get the usual difference warning, and drawings from files
carry no thickness, so they leave the nest blank.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate > Set as Default and Nest > Edit's Defaults tab only changed the
open nest, so new nests never picked up the values. Set as Default now
also saves the new-nest defaults, and the Defaults tab gains an opt-in
"Use these defaults for new nests" check.
Machine thicknesses can now set part and edge spacing. A nest takes them
when its material, grade, thickness or machine changes and when a release
creates it; BOM import seeds its groups from them. Spacing edited in the
same dialog stays, and only an untouched trailing sheet follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pressing a dimension's value text now grabs it like its line does. The
label keeps its offset under the pointer, so a radius or diameter value,
which sits past its leader's end, no longer jumps when grabbed. Hit boxes
are measured the way painting draws them, at the control's DPI.
Holes and radii need sizes on the drawing as well as the overall extents. Select
circles or arcs, right-click and choose Add Radius Dimension or Add Diameter
Dimension. The value is measured live from the curve, found by its entity ID, so
it follows edits; only the leader angle and label offset are saved. A radius on
an arc stays on its sweep, and labels are kept clear of the curve and center.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Extension lines started at the extents' corners, which float in empty space on
angled or irregular parts. They now run from the dimension line toward the part
until they first meet the profile offset by a fixed screen gap, so they reach
the feature they measure without touching it at any angle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shops need a part's overall size on the drawing while converting it. Width and
height are measured live from the geometry that will be cut, so they follow
filters, exclusions, simplifying, breakoffs and tabbed cutouts instead of going
stale. Only the placement is saved; dimensions never touch the program.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Limits are plain coordinates, so moving a cut-off left the lines trimmed
to it stopping where it used to be. A drag now takes along perpendicular
lines with a limit or gap edge on its center, extending or trimming them
to keep meeting it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Customers and design tools hand over SVGs, and getting them in meant a
trip through another CAD tool. CadImporter now reads them like any other
drawing, and plates, programs and converter entities can be written out.
An SVG's numbers are not drawing units, so import converts to the nest's
units and never guesses: only an absolute width or height counts as a
stated size, since px means 1/96 in to browsers but 1/72 in to
Illustrator. Without one the desktop asks, showing the size each choice
gives, and headless callers must pass the scale or the import fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The repo mixed variants such as center/centre and color/colour, so a
name could be spelled either way and searches missed half the hits.
Standardize on the US spelling, matching .NET's own APIs (Color, Center).
Wire values owned by other systems keep their spelling: the material
ledger's "Cancelled" hold status and GitHub's "cancelled" job status.
No behavior change beyond the spelling of a few status messages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edits in the Cutting Parameters dialog only reached user settings, while a
plate's stored parameters took priority, so a change was lost on any
planned plate unless Apply succeeded. User settings now win; a plate's own
are the fallback when none are saved or readable.
WinForms tests saved to the real user-settings.json, and with user settings
winning a test's lead-ins would feed real planning, so they now use a temp
file and skip the legacy settings carry-over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Roslyn Bridge flagged these as copy-paste clusters; each pair now shares
one implementation so a fix lands everywhere at once:
- Shape.OffsetInward/OffsetOutward differed only in the target winding.
- BestFitFinder kept its own copy of SpatialQuery's arc-extreme points.
- SplitDrawingForm rebuilt DrawingSplitter's clip-region grid for preview.
- GeometryOptimizer's collinear/coradial finders (one misspelled
GetCoradialArs) become one generic FindRelated.
- Five settings files repeated the write-with-retry loop, and two also
repeated the unit parser and unreadable-file filter (SettingsFile).
- ClampsForm and SupportGridForm repeated their row/box builders.
- Vertical/HorizontalRemnantComparer share a RemnantComparer base.
Behavior is unchanged except that Engine/NestStorage settings loads now
also tolerate NotSupported/Security exceptions, matching the other
settings files' never-throw contract.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Trim refused the piece between two crossing cut-offs because a cut-off had
one start and one end, so a line could not be stopped short around a pocket
of parts without deleting it and drawing two. A cut-off now carries Gaps,
stretches between its limits left uncut: segment generation excludes them
like parts, so the line splits into segments that each take their own place
in the cut sequence. Trimming a middle piece adds a gap from one crossing
centre to the other (merged with any it touches), Extend near a gap's edge
closes it, and Swap Through-Cut refuses a junction a gap touches rather
than guess which side of the gap should run through.
Every reader of the limits treats a gap as uncut, so nothing waits for,
warns about or credits a cut that never happens: segment spans stop at a
gap, the cutting dependencies skip a part inside one, the clamp check
ignores a clamp inside one, the cutting-state and overlap stamps go stale
when gaps change, and a gapped line is never full span for the expected
remnant or automatic cut-offs. Gaps persist as an optional gaps array;
older versions ignore it and would cut straight through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release panel was the only place that counted a set in kits;
everywhere else in the drawing library calls them sets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A manual cut-off ran the full sheet even when another cut-off crossed it,
leaving a Trim/Extend pass to clean up what Automatic Scrap Cutoffs does
on its own. New lines now run from their start edge, set by the cut
direction, and stop at the first crossing line. Tab switches to full
length for the lines that should run through, and the choice lasts until
the nest is closed.
Suggested-by: alexvyperus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The sheet glyph filled only about half of a near-black tile that vanished
on the dark taskbar, so the icon read much smaller than other apps'.
Scale the glyph 1.3x, lighten the tile and give it a pale edge, then
re-render every .ico frame (16-256 px) directly from the SVG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine selection and the whole-job progress adapter use only Engine
and Data, so they move into the toolkit-neutral library for the Avalonia
front end to share. The namespace stays OpenNest.Forms, so WinForms
callers are unchanged.
Linux tests now cover the adapter's stage routing, one-based plate
numbers and descriptions, and the fill-strategy mapping; the saved
selection is left out because it reads and writes the real per-user file.
Machine Configuration held one lead-in and lead-out per thickness and
applied it to every contour. Each thickness now has Outside Cuts and
Inside Cuts tabs; inside cuts follow the outside leads until "Same as
outside cuts" is cleared, and configurations without inside leads keep
applying one pair to both.
The lead type lists, per-type fields and preview from Cutting Settings
are now a reusable LeadsEditor control that both dialogs use. The
machine tabs hide what the configuration cannot hold: the arc sweep,
the clean-hole kerf (taken from the thickness) and Line + Line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Thicknesses take an optional name or gauge shown beside the value in
the tree. The Machine Configuration form keeps the selected tab while
moving between thicknesses or machines, and opens fully expanded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document and Undo/ (ChangeScope, NestFingerprint, NestUndoState) use
only Core, Data, IO and Engine, so they move into the toolkit-neutral
library both desktop front ends share. Namespaces are unchanged, so the
WinForms app compiles as before; it keeps using the internal scope
factories and fingerprint through InternalsVisibleTo.
The scope, fingerprint and SaveAs/save-point rules now have Linux tests
in OpenNest.Desktop.Tests; before, only the Windows-only WinForms suite
covered them.
A clamp rail can now carry its own Clearance, the gap parts keep from
every clamp footprint, independent of part spacing. Unset, it keeps the
sheet's bottom edge spacing as before. Clamp blocks drawn under the
sheet can use close to zero so the laser only stays off them.
Plate.ClampClearance and NestPlateStock.ClampClearance resolve it once;
the engines, interactive fill/pack/push, the layout check, Expander walls
and automatic cut-off placement all read it. The interactive push now
holds clamps at their square clearance keep-out (the layout check's
shape) instead of the part spacing, so parts no longer tuck into its
corners; the clamped fill characterization digests are re-pinned after
checking the new layouts validate.
Persisted as an optional `clearance` on the .nest clamp rail and the
machine clamp settings; edited in Nest > Clamps and the machine's
Clamps tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Help menu's F1 shortcut took the key before the plate view, so F1
in Clone/Add Part opened help rather than setting the part in place as
it always has. Actions can now claim F1; Clone does, and MainForm lets
the key through to the plate view while it is active.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators could only drag or delete a cut-off, so changing which line runs
through a junction (e.g. letting a vertical split the sheet to keep a whole
remnant beyond it) meant deleting and re-adding lines. Trim/Extend edits the
existing start/end limits instead, so no file-format or planner change is
needed: trims stop on the crossing line's centre, extends run to the next
crossing or the sheet edge, and Swap Through-Cut (right-click a junction)
does both at once, trimming the through line's far side because only the
origin-side edge is certain. Edits undo as one step and re-place the changed
segments with PlateSequencing.PlaceCutOffs so a new separator is cut last.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>