F1 opening help kept taking over from placing a part. Help stays on
the Help menu and F1 belongs to the Clone tool alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate commands need an open nest and no running job; Trim/Extend Cut-Off
needs a cut-off on the plate and Sequence by Path needs two parts. The
Plate menu's Trim/Extend item follows the same rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The header gets a fourth zoom button that starts the existing Zoom Window
action, with a matching dashed-window icon also shown on View > Zoom To >
Area. It stays out of the inspection's live zoom controls: inspection owns
Escape, so a zoom window could not be cancelled there.
Clone's Delete only removed its source parts, so parts picked with
Select All stayed on the plate until Escape ended the action.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Windows reposts a mouse move when a dialog opens or closes, so Set
Offset Increment threw away arrow-key nudges by snapping the previews
back to the cursor. Only a real cursor move now moves them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Show Original drew nothing until Simplify ran, and then showed entities that
had already been through import cleanup. The importers now capture the
entities before any optimization and the overlay draws those from load, while
Simplify keeps starting from the cleaned entities.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Desktop test classes each kept identical PumpUntil, Show, Mouse, All,
PressKey, Raise, SetBackingField and Field helpers. They now import
FormTesting and TestReflection; the two Field variants that read a base
type's field or unwrap DrawingLibraryForm keep a one-line wrapper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ten desktop test classes drew the same squares and the same 4 x 2
rectangle in private helpers, in two equivalent styles. They now use
TestPrograms.Square, ClockwiseSquare and Rectangle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing library, drawing sets, saved nests, add-release and edit-set
grids each repeated the left-click header check that sorts on the
server. BrowsePager.SortByHeaderAsync now does it for the grid and
session it already drives. No behavior change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MachineConfigForm and SavedNestsForm built their tab pages, and
CuttingPanel and LeadsEditor their label / input / hint grids, with
identical private helpers. Both now use ControlFactory. No behavior
change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HorizontalLine and VerticalLine had identical constructors, Dispose and
resize handling. They now derive from SeparatorLine and only say which
way the line runs. No behavior change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate > Set as Default and Nest > Edit's Defaults tab only changed the
open nest, so new nests never picked up the values. Set as Default now
also saves the new-nest defaults, and the Defaults tab gains an opt-in
"Use these defaults for new nests" check.
Machine thicknesses can now set part and edge spacing. A nest takes them
when its material, grade, thickness or machine changes and when a release
creates it; BOM import seeds its groups from them. Spacing edited in the
same dialog stays, and only an untouched trailing sheet follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pressing a dimension's value text now grabs it like its line does. The
label keeps its offset under the pointer, so a radius or diameter value,
which sits past its leader's end, no longer jumps when grabbed. Hit boxes
are measured the way painting draws them, at the control's DPI.
Holes and radii need sizes on the drawing as well as the overall extents. Select
circles or arcs, right-click and choose Add Radius Dimension or Add Diameter
Dimension. The value is measured live from the curve, found by its entity ID, so
it follows edits; only the leader angle and label offset are saved. A radius on
an arc stays on its sweep, and labels are kept clear of the curve and center.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shops need a part's overall size on the drawing while converting it. Width and
height are measured live from the geometry that will be cut, so they follow
filters, exclusions, simplifying, breakoffs and tabbed cutouts instead of going
stale. Only the placement is saved; dimensions never touch the program.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Limits are plain coordinates, so moving a cut-off left the lines trimmed
to it stopping where it used to be. A drag now takes along perpendicular
lines with a limit or gap edge on its center, extending or trimming them
to keep meeting it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Customers and design tools hand over SVGs, and getting them in meant a
trip through another CAD tool. CadImporter now reads them like any other
drawing, and plates, programs and converter entities can be written out.
An SVG's numbers are not drawing units, so import converts to the nest's
units and never guesses: only an absolute width or height counts as a
stated size, since px means 1/96 in to browsers but 1/72 in to
Illustrator. Without one the desktop asks, showing the size each choice
gives, and headless callers must pass the scale or the import fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The repo mixed variants such as center/centre and color/colour, so a
name could be spelled either way and searches missed half the hits.
Standardize on the US spelling, matching .NET's own APIs (Color, Center).
Wire values owned by other systems keep their spelling: the material
ledger's "Cancelled" hold status and GitHub's "cancelled" job status.
No behavior change beyond the spelling of a few status messages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edits in the Cutting Parameters dialog only reached user settings, while a
plate's stored parameters took priority, so a change was lost on any
planned plate unless Apply succeeded. User settings now win; a plate's own
are the fallback when none are saved or readable.
WinForms tests saved to the real user-settings.json, and with user settings
winning a test's lead-ins would feed real planning, so they now use a temp
file and skip the legacy settings carry-over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Trim refused the piece between two crossing cut-offs because a cut-off had
one start and one end, so a line could not be stopped short around a pocket
of parts without deleting it and drawing two. A cut-off now carries Gaps,
stretches between its limits left uncut: segment generation excludes them
like parts, so the line splits into segments that each take their own place
in the cut sequence. Trimming a middle piece adds a gap from one crossing
centre to the other (merged with any it touches), Extend near a gap's edge
closes it, and Swap Through-Cut refuses a junction a gap touches rather
than guess which side of the gap should run through.
Every reader of the limits treats a gap as uncut, so nothing waits for,
warns about or credits a cut that never happens: segment spans stop at a
gap, the cutting dependencies skip a part inside one, the clamp check
ignores a clamp inside one, the cutting-state and overlap stamps go stale
when gaps change, and a gapped line is never full span for the expected
remnant or automatic cut-offs. Gaps persist as an optional gaps array;
older versions ignore it and would cut straight through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing library tests relied on DataGridView picking a current row by
itself when the page is populated. It only does that when the first row is
already laid out as displayed, which the hosted Windows runner does not
guarantee. Without a current row SelectedRecord() is null, Add/Edit return
silently, and the test fails later:
- run 41057280460: EditSettings_SavesCutFirstAsANewRevision_AndTheAddAppliesIt
"Timed out waiting for the reloaded page."
- run 40312036013: MismatchWarning_IsShownBeforeTheAdd_AndCancelLeavesTheNestAlone
expected 2 messages, got 0.
Make the first row current explicitly after each page load (and after the
edit reload that precedes an Add), and make Run() rethrow a faulted task so
a failed step reports its own error rather than a 15 s timeout.
The release panel was the only place that counted a set in kits;
everywhere else in the drawing library calls them sets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A manual cut-off ran the full sheet even when another cut-off crossed it,
leaving a Trim/Extend pass to clean up what Automatic Scrap Cutoffs does
on its own. New lines now run from their start edge, set by the cut
direction, and stop at the first crossing line. Tab switches to full
length for the lines that should run through, and the choice lasts until
the nest is closed.
Suggested-by: alexvyperus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Machine Configuration held one lead-in and lead-out per thickness and
applied it to every contour. Each thickness now has Outside Cuts and
Inside Cuts tabs; inside cuts follow the outside leads until "Same as
outside cuts" is cleared, and configurations without inside leads keep
applying one pair to both.
The lead type lists, per-type fields and preview from Cutting Settings
are now a reusable LeadsEditor control that both dialogs use. The
machine tabs hide what the configuration cannot hold: the arc sweep,
the clean-hole kerf (taken from the thickness) and Line + Line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Help menu's F1 shortcut took the key before the plate view, so F1
in Clone/Add Part opened help rather than setting the part in place as
it always has. Actions can now claim F1; Clone does, and MainForm lets
the key through to the plate view while it is active.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators could only drag or delete a cut-off, so changing which line runs
through a junction (e.g. letting a vertical split the sheet to keep a whole
remnant beyond it) meant deleting and re-adding lines. Trim/Extend edits the
existing start/end limits instead, so no file-format or planner change is
needed: trims stop on the crossing line's centre, extends run to the next
crossing or the sheet edge, and Swap Through-Cut (right-click a junction)
does both at once, trimming the through line's far side because only the
origin-side edge is certain. Edits undo as one step and re-place the changed
segments with PlateSequencing.PlaceCutOffs so a new separator is cut last.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Undo regenerates each restored plate's cut-offs, which removes the
cut-off parts first. A plate holding nothing but cut-offs became empty
for a moment, so the new-plate sentinel dropped a trailing plate while
the restore was still enumerating the plates, throwing "Collection was
modified". Regenerate inside a PlateManager batch so the sentinel only
settles once every plate is done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Issue #13 asked whether a Sheet Cut-Off can be rotated; Space already
toggles vertical/horizontal, but nothing said so. The tool now shows a
"Space: turn horizontal" tag by the pointer, spells out its keys in the
status bar, and F1 opens a new sheet-cutoff help topic while it is
active (actions can now supply a status hint and a help topic).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plan Cutting saved its settings only on a successful Apply, so a plate
that would not plan lost them. Each open then laid the machine's leads
back over the last parameters, and the cutting panel rebuilt parameters
from scratch, dropping kerf and the machine/material/thickness stamp.
Save the settings when the dialog is accepted, keep the panel's
unexposed fields, and only apply the machine's leads when the last
parameters were not already taken from that machine, material, grade
and thickness.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PlateFillService throws for a plate with a sheet outline, but the desktop
swallowed it: Fill (Ctrl+F) caught every exception and showed nothing, and
Fill Area's async void either completed silently or let it escape.
PlateFillService.Refusal(plate) names the reason, and every caller checks
it first: Fill and Fill Area put it in the status bar and add nothing,
Pattern Tile offers a new plate only, the MCP fill/pack tools return it as
an Error result, and the console exits 2 with it unless --autonest is given.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The plate view fills the outline, hatches obstacles and draws the usable
area; Edit Plate imports an outline from a CAD file or clears it, with
the size read-only while the sheet has one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Browsing nests in Database mode crashed with ObjectDisposedException on
DataGridView: selecting another nest drops the embedded version history,
and WinForms leaves its grid's keyboard-tooltip auto-pop timer running.
When the timer fired it hid the tooltip through the disposed grid.
GridStyle now hides that tooltip when a styled grid's window is destroyed,
which stops the timer for every grid in the app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
8dded7f1 draws cut-off ids white on a disc of the cut-off line's orange,
so the old assertion that no orange touches the id failed on the Windows
CI job. The test now checks what the disc is for: the disc is there, and
the id's white strokes survive on the cut's own pixels. Drawing the lines
after the labels fails it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every installed copy checked GitHub Releases on its own, so a shop's
workstations shared GitHub's 60-requests-per-hour unauthenticated limit
per public address and each downloaded the ~90 MB package over the
internet. Shops large enough to hit that already run the nest server.
The server now mirrors the Velopack feed at /updates/{stable|dev}: one
GitHub API request per 30-minute refresh, each package downloaded once
and checked against the feed's size and SHA-256 before it is served. A
channel is mirrored only while clients ask for it, so stable-only shops
never download development builds. Database-mode clients read the
server first and fall back to GitHub when it has no feed (old server,
mirror off, not mirrored yet), downloading each package from whichever
source listed it. A hand-set feed URL still takes precedence.
OPENNEST_UPDATES=off turns the mirror off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The plate-colored disc behind a cut-off id read as a notch in any part edge
the cut runs along. An orange-red disc with a white id reads as a tag on the
cut-off line instead, and still keeps the dashed line from striking it through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Highlighting an earlier version on the Versions tab left the plates,
drawings and plate preview on the current version, so there was no way
to see what a historical version looked like without opening it. The
embedded history now reports its selection and the browser downloads
that version (debounced, cached per history view) and shows it, labelled
as historical; selecting the current version returns to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel gains a Current plate only / All plates selector, shown when the
two scopes differ. Changing it takes the unapplied scrap cut-offs off,
cancels any running plan and replans. The toolbar button opens with the
scope last chosen there (default all plates); the Plate and Nest menu items
keep their fixed scopes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest leaves out ledger item codes already on other open server nests,
and save and post re-check a nest's codes before going on.
- Server: GET /api/nests/stock-item-codes?exclude= lists the codes on
non-deleted Draft, Quote and To Be Cut nests. Codes are stored in
nest_stock_codes (schema v14) at every archive write; the upgrade reads
each current archive once.
- Data: INestRepository.GetStockCodesInUseAsync, LedgerCodesInUse (5 s,
failures become an unknown answer), the pure LedgerCodeFilter for ledger
rows (reusable by release-time nesting) and LedgerCodeCheck for the
re-check.
- Desktop: the Auto Nest ledger summary counts "(N on other nests)" or says
other nests were not checked. Save, Save As and post open Ledger Stock
Changed when codes are taken: proceed after a per-attempt
acknowledgement, remove the codes (undoable), or cancel. A ledger that
cannot be read skips the check with a status note.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WinForms user settings lived in user.config under %LOCALAPPDATA%\OpenNest,
the Velopack install folder that setup clears on a reinstall, and the
default provider starts empty at each assembly version. Store them in
%APPDATA%\OpenNest\user-settings.json instead, carrying over any values
the old user.config still holds on first run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add a Support Bed tab beside Clamps that edits the grid or slats new
nests assigned the machine receive. A machine without a bed shows the
legacy support-grid.json values; the first edit stores them on the
machine in its units.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The status bar shows the running version, and the Help menu gains
Check for Updates (an immediate check sharing the background check's
lock) and About OpenNest. A copy that is not a Velopack installation
offers to open the GitHub Releases page instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drawing.Bends stay in the DXF's source frame while CadImporter moves the
program so its first pierce sits at the origin (Source.Offset). The plate
renderer added part.Location to raw bend points, so every bend and etch
mark was shifted by its drawing's pierce offset, visible on the drawing
library set preview and on plates alike. Remove Source.Offset before
rotating and placing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- archived library drawings: say they can't be edited or released; no
front end can restore a library drawing yet
- library filter hint names the Show all materials checkbox
- undo labels Support Bed and Automatic Scrap Cutoffs match their menus
- display-outline posting hints name both Plate > Plan Cutting... and
--plan-cutting, since the console prints them too
- MaterialLedger options are saved per Windows user, not per machine
Clamps are physical fixtures that differ between machines, but one global
clamps.json served every machine, so a plasma table and a fiber laser could
not have different rails.
- MachineConfig.Clamps holds each machine's rail in the machine's units,
edited on a new Clamps tab in Tools > Machine Configuration.
- New and BOM import give a nest the rail of the machine they assign;
Nest > Clamps loads and saves the nest's machine's clamps. Each nest keeps
its own copy, so machine edits never move existing nests' clamps.
- At startup, while no machine has clamps, the legacy clamps.json (or the
server's shared copy) is copied once into the default or only machine;
with several machines and no default the user picks one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shape Library, drawing library and drawing set preview each drew
parts their own way (hardcoded green fill, steel-blue fallback, black
outlines with gray etch). They now share a library style on ColorScheme
(background, fill, outline, etch and bend colors) that ignores drawing
colors, follows the active scheme (Dark gets a dark variant) and
round-trips through saved schemes, defaulting when absent. Nest part
colors are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Replace the name list with a ListView of 96px thumbnails drawn by
Program.GetImage at each shape's preview defaults (or its first
configuration), labelled with the name and configuration count. The
left pane opens three tiles wide instead of half the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5