Preview on the Sets tab (button and right-click menu) downloads each
member's current revision and packs them into one view, labeled with
name and quantity, so part sizes compare at a glance. PlateView gains
DrawPartNumbers (default on) so the preview can hide sequence numbers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without salvage credit (desktop Auto Nest on a single plate size) every
complete one-sheet layout costs the same, so engines kept whichever layout
came first. N26-23S nested 27.86" long when turning two parts fits it in
21.3".
NestJobCost.CompactnessOffcut measures the largest full-width/full-length
edge offcut as salvage does, whatever the salvage rate. Default and Circles
(CandidateScore), Rectangles and Circles sheet choice (SheetByStock) and
Irregular sheet and plan ranking use it only after cost, so no cost changes.
Sheet-level keys round to 1e-6 to keep ties platform-independent.
Rectangles layout digests are re-captured: each changed fixture keeps its
sheets, parts and cost and leaves a larger offcut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The benchmark built stock from spacing and quadrant only, so engines were
scored on clamp-free sheets and baselines were never checked against the
clamps they were made with. Stock now comes from NestStockBuilder.FromTemplate,
as in desktop Auto Nest: the source plate's rail is resolved for every
candidate size (explicit zones are offered unchanged), and baseline plates
keep their rail and removed clamps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Grid columns no longer stretch to fill the control. GridStyle sizes each
column once to its header and the first rows shown (capped at 400 px),
then the widths are the user's to resize.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Drawing Library, Drawing Sets, Releases and database-mode Import
BOM now open the window inside the main form, maximized, instead of as a
modal dialog. A second menu click activates the open window on the tab
asked for. Close now closes the window, since a DialogResult button no
longer does outside a modal dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing library browser becomes DrawingLibraryView, a control. The Drawing
Sets window hosts it as its Library tab beside Sets and Releases, and File >
Drawing Library opens the window on it. A library drawing's Releases item
switches to the Releases tab filtered to it. Nest > Add from Drawing Library
stays a dialog, now a thin wrapper around the same view.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
ColorScheme.Default and LayoutPart kept single static pens, brushes and a
font that every plate view and drawing preview painted with. GDI+ objects
are not thread-safe, so two views painting at once on different UI threads
(parallel WinForms test collections) failed in PlateRenderer.DrawPlate with
"Object is currently in use elsewhere" and crashed the test host.
The scheme now builds its pens and brushes per thread and rebuilds them
after a color change; LayoutPart's selection, lead-in and label objects are
thread-static. A regression test paints previews on four threads at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drawing Sets > More > Import BOM reads a BOM and its drawing folder,
matches each drawing to the library by its D4 identity and geometry
(reuse, new revision, or new drawing) and opens the set editor with a
new set prefilled with the BOM quantities. Reading only queries the
library; Create Set lists the uploads and revisions and asks before
storing them, and the set is stored only by the editor's Save.
Parts with no material or thickness still import and are flagged for
Edit Drawing. DrawingPackage.GeometryKey compares geometry independent
of the fresh entity ids each DXF import assigns. In Database mode File >
Import BOM opens this flow instead of creating nests directly; File mode
is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The set browser's six equal buttons become New Set..., Edit..., More and a
bold Make Nests.... Archive/Restore, History... and Releases... move into a
menu that the More button drops down and that is also the set list's
right-click menu (menu key and Shift+F10 open it; right-click selects the
row first). Access keys: &New Set, &Edit, M&ore, &Make Nests; the menu has
&Archive/&Restore, &History, Re&leases. Enabled rules are unchanged; More is
enabled while any of its items is. The picker hides More and has no menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The member grid shows one Material column (name, grade, thickness and
units, such as "Steel A36 0.25 in"), Qty and Note; Cut type appears only
when the set mixes cut types. Move Up/Down are gone: member order only
breaks ties (materials are grouped and sorted on release, nests list
drawings by name), and the stored order is kept as it was. The dialog
opens at 1040 px instead of 1264, with the library pane unchanged and
still resizable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing sets window now has two tabs. Releases hosts the release list
(paging, nests, Undo Release, New Release) as a SetReleasesView control that
replaces SetReleasesForm. File > Releases stays as a shortcut that opens the
window on that tab. A set's Releases (Sets tab) and a library drawing's
Releases (Drawing Library) open the tab filtered to it, with the filter shown
above the list and Clear Filter to list every release. Releases re-reads its
page whenever the tab is shown again, so a release made on Sets appears.
The set editor gets History... for a saved set; the Sets tab keeps its
History button until the browser's buttons are rearranged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release dialog now reads as a sentence ("Release set 'X' ×N") and
previews what Make Nests will do ("Creates 2 nests: ..."), with refused
materials counted and Fix Drawings reachable without selecting them.
An Options toggle holds the Release ticks, the Nest column and Include
archived drawings; collapsed, an option stays shown while it differs
from its default, and the Nest column shows whenever a Draft nest could
be merged into. Defaults, release, undo and retry are unchanged. The
Status column wraps so refusals are not cut off, and the retry status
reads "... Try Again records it; the nests are not made again."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Wording only, no behavior change: "kit" becomes "set" or "Quantity",
the release button reads Make Nests... (Try Again after a failed
record), the releases list shows Material and Action, and the release
dialog's status lines are shorter. Help in docs/nest-storage.md follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds on the library's Edit Drawing (details as a new revision):
- warns before saving details that would duplicate another active library
drawing (D4), naming them; a failed lookup also asks;
- File > Drawing Library, a nest-less mode of the library browser that lists
every active drawing and edits on double-click;
- the set editor's member grid (double-click, right-click, button);
- the release dialog: Fix Drawings on a group refused for missing material or
thickness or duplicate names, so those refusals are no longer a dead end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Slats are strips of a set thickness running the full length or width of
the table, one every pitch. A part's contacts are the corners of where its
material crosses a slat, so the support check and support tabs work as on
the grid. Nest > Support Bed... picks grid or slats; nest files store
type "slats" and support-grid.json keeps both layouts' values. Draw
Support shows the slats cut off to the sheet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Starting the tool while it was open built the new action before the old
one was disconnected, and the old one's teardown cleared the new muting.
The outgoing action now leaves the view alone once a successor owns it,
and opening the tool repaints the plate right away.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit Settings becomes Edit Drawing: name, customer, material, grade,
thickness and cut type are editable beside the nesting settings and
notes. Units stay read-only. The save is a metadata revision with the
same package, so nests keep the revision they hold, and the release
refusal for drawings without material or thickness now has a fix.
Entity ids came from a process-random sequence, so importing the same
DXF twice produced different source-entity ids and therefore a
different drawing library package (different SHA-256), and an importer
could not tell an unchanged file from a changed one.
CadImporter.Import now derives each entity id from the file's SHA-256
and the entity's position in the import. An unchanged file gives the
same ids and the same package bytes; any change to the file gives
entirely new ids, so suppression, roles and edge selections keyed by id
never move to a different entity.
Auto Nest and the CAD Converter open these pages from F1 instead of the
short first-nest sections, and cutting planning and nest checks get their
first help pages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
v0.2.0 adds the Machines page (nest machine, default machine, per-machine
support grid, machine lead-ins) and the machines, nest-machine and
support-grid topic IDs. desktop-help.md now points at the help repo's
version rules so the next release is numbered the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The assigned machine now drives the support grid, lead-ins and cut-offs, so
it should be visible without opening a menu. The status bar shows
"Machine: <name>" beside the material; left- or right-clicking it lists the
machines (the same list as Nest > Machine) above the label.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Machine configurations already held a lead-in, lead-out, kerf and cut-off per
material thickness, but nothing read them: Plan Cutting and Place Lead-in
started from whatever was last applied (often another machine's or another
thickness's leads), and cut-offs used fixed view defaults. Now that nests carry
a machine, those values can be the starting point.
- MachineCuttingDefaults maps a machine's thickness settings for the nest's
material/grade/thickness onto CuttingParameters and CutOffSettings,
converting units. Clean Hole stays on holes; Line + Line is not mapped
because the configuration lacks the second segment.
- Plates without their own parameters start from the last-applied ones with
the machine's leads and kerf laid over them; plates with parameters keep them.
- The plate view's cut-off clearance, overtravel, minimum segment and direction
follow the machine on open, on Nest > Machine and after Nest > Edit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The support grid was one shared support-grid.json, off by default, and a nest
had no machine at all, so a plasma table and a fiber laser could not have
different grids, and nothing could pick machine-specific behavior later
(lead-ins differ between laser and plasma; tabbing depends on the grid).
- Nest.Machine (id + name) persists as top-level `machine` in nest.json;
malformed values load as none.
- MachineConfig.SupportGrid holds each machine's grid; a machine without one
still falls back to the legacy support-grid.json.
- New and BOM import assign the Tools > Nest Defaults machine (first by name
when none is chosen) and give the nest that machine's grid.
- Nest > Machine reassigns a nest and swaps in the new machine's grid;
Nest > Support Grid saves machine defaults to the nest's machine.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stock can arrive up to 1.5 in wider than nominal, so only the origin-side
edge is certain. A cut-off with a head-locked overcut cuts past the nominal
far edge with the head height locked, covering the oversize. With that lock,
Plan Cutting may start the far-edge segment at the far edge: overcut outward,
rapid back still locked, unlock, cut toward the origin. Without it the
direction stays fixed, as decided in Project Memory a20ea455.
- CutOff.HeadLockOvercut / FarEdgeFirst, persisted in .nest; HEAD HEIGHT
LOCK/UNLOCK comment markers; far edge is quadrant-aware.
- Planner offers the reversed far-edge segment in the joint search, the
safest route and segment insertion; Apply records the direction.
- Cincinnati CL and CI Fiber posts gain lock/unlock code settings and refuse
head-locked cut-offs while either is empty.
- Automatic cut-off dialog setting (off by default, 1.5 in), kept between
sessions and used for new cut-offs.
Lock codes and machine behaviour with the head locked are unconfirmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only the packaging scripts installed Help\, so F1 and the Help menu in a
dev build always said help was not installed. The build now downloads the
help.json release once into obj\ and copies it beside OpenNest.exe; CI and
publish output are unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Roslyn duplicate scans found the same code copied across layers:
- Data: the three browse sessions share BrowseSession<TPage, TSort>;
the remote clients share NestServerHttp (JSON options, If-Match,
error text).
- WinForms: five paged lists share BrowsePager for loading text,
navigation, sort glyphs and failure messages. The Add Drawings to
Release, Drawing Library and set browser dialogs now dispose their
browse sessions.
- Server: NestQueryRequest reuses DrawingLibraryRequest's helpers;
revision history queries share count and paging binds.
- Engine: RemnantPlateNester delegates to DefaultPlateNester;
CuttingPlanService reuses JointCuttingPlanSearch.Map.
- Core: LineArc and CleanHole lead-ins share LineArcApproach with
unchanged arithmetic order, so output is bit-identical.
- IO: Dxf.GetGeometry overloads share one reader; .nest JSON test
helpers move to NestArchiveJson.
Also fixes the production compiler warnings (CS8632, CS8603, CS0108)
and moves a test off an obsolete forwarding API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No verified server image has been published yet, so the shop server runs
development builds. Building on the host meant cloning there and hand-editing
compose; the script builds with the local Docker engine, ships the image,
backs up the data volume and waits for the health check, printing what a
rollback across a schema upgrade needs. docs/nest-storage.md describes it
beside the Compose deployment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rapids may not cross holes already cut. On an instrument panel, mounting
holes either side of a cutout become unreachable from each other once
the cutout is cut, so the holes must come first. The contour-by-contour
search backtracks chronologically through every entry combination of
the last holes before it changes their order, and ran out of budget.
Supplied-blank doors fell to an unverified safest route.
Three changes:
- Contour recovery, the part solver that memoizes failed states, now
runs for display-perimeter parts too: their holes are the whole part,
with no outside cut to finish on.
- A door alone on its sheet gets the recovery pass first. Any other
lone part keeps the plain search, whose routes are shorter.
- Recovery learns, as whole-part ordering does: a hop onto a hole that
crosses holes of the chain teaches "cut it before them" (skipping any
rule that closes a cycle) and restarts the chain, with holes still
waiting for a prerequisite ranked last. Rules only order candidates;
no hole is skipped. Until a rule is learned the chain is unchanged.
Emission splits a contour at its entry with Arc/Line.SplitAt, which treat
a point within Tolerance.Epsilon (1e-5) of an endpoint as that endpoint
and start the contour there. The lead-in still ended at the entry point
itself, so an entry 1e-8..1e-5 from a vertex left that span uncut and the
plan's own verification refused it ("does not preserve complete directed
contours").
Imported PEP mounting holes hit this: two half circles whose stored centre
sits 5e-8 beside the chord's midpoint, so the closest entry to an approach
from straight below lands 5e-8 along the first arc from its start. Panel
doors were refused on every plate holding such a hole.
PreparedContours now snaps an entry 1e-8..1e-5 from its entity's start or
end to the exact vertex, for automatic entries, scrap pierce entries and
drawing pins alike, so the lead-in ends where the contour starts. Entries
already within 1e-8 are left as they were, so saved pinned programs
re-emit unchanged. Entries de-duplicate on the snapped point, and
near-corner insets keep the snap distance from both edge ends so none can
snap onto a reflex vertex.
GET /api/nests/{id}/sheets reads the stored archive's nest.json and returns
the sheet sizes it needs (grouped, width the shorter side, quantities summed)
and each drawing's required and nested counts, skipping the trailing empty
plate as plateCount does. MaterialLedger builds material holds from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A part with about 1,700 holes (P241017-01) never planned: material
capture paired every boundary with every other one and lead checks
scanned every boundary per lead, so both hit the 1M native query limit
and the plate fell back to an unverified best-effort plan.
- Material capture sweeps boundary extents along X and queries only
pairs the lead checks' per-pair clearance cannot skip, in the full
scan's order.
- Material with 64+ boundaries keeps a grid of boundary extents. Lead
checks, contour-joint matching and replay's contour accounting query
only nearby boundaries; ray parity reads only holes on the point's row.
- Only native queries that run are charged to the budget; skipped far
material no longer costs its full boundary count.
- The search looks up chosen holes and route ranks instead of scanning.
With that the plate plans Ready, but in 189 s: every step re-emitted
and re-checked all holes already cut. On parts with 64+ contours a
middle hole step now checks only the contour it adds, continuing the
completed-contour state its prefix left (ReleasedContourState.Continue).
It falls back to the full prefix whenever it cannot continue exactly,
and the last contour still checks the whole part from before it.
Isolated contour emission clones only the chosen contour.
P241017-01 now plans Ready in 5.4 s with an identical route, expansions
and rapid travel. Core and engine suites pass; the problem-nest corpus
matches the unchanged commit's outcomes and expansions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Automatic cut-offs refused any part reaching past the physical sheet by
more than Tolerance.Epsilon. Imported supplied blanks (panel doors,
remnants) equal their sheet but carry PEP's rounding: a 0.000006 outline
skew plus placements rounded to 0.001 put the never-cut outline 0.00001
to 0.00003 in past the sheet, so Plan Cutting refused every such nest.
A display perimeter may now extend up to DisplayPerimeterSheetAllowance
(0.0001 model units) past the sheet. Nothing cuts it, and a blank that
fills its sheet gets no cut-offs. Everything else on the part keeps the
ordinary tolerance: cuts, leads, scribes and travel, except a rapid that
ends on the outline itself (the move to its first corner, or an applied
program's display tail). A larger overhang is still refused.
Server schema v8 adds materialGrade, so the migrated legacy records now
report it and the server-image smoke's manifest comparison failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Help > OpenNest Help (F1) and context F1 in Auto Nest and the CAD Converter open
the bundled opennest-help site in a single WebView2 window on its own UI thread.
Both packaging scripts install the opennest-help release pinned in
scripts/help.json, verified by SHA-256. The missing lead-in finding now says
the contour is missing lead-in geometry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the pre-post risks acknowledged, an unplanned blank reached the
Cincinnati and engraver posts, which created the output file before
refusing: an existing program at that path was emptied and the desktop
had no handler for the refusal. Both posts now check every part before
creating the file, and Post shows the refusal like the multi-file path.
A display tail marker is now honoured only as one marker ending the
part's own program, followed by a rapid and the outline alone. A marker
inside a sub-program or followed by real cuts is refused by posts and by
executed reads, so cuts after it can never be dropped from both
verification and output.
Enclosure was tested at one point per entity, so a round cutout starting
on the blank but running past its edge, or a cutout whose corners all sit
on an L-shaped blank while an edge crosses its notch, reached an
unverified plan that warning acceptance could apply, cutting into or past
the never-cut edge. Every cut is now sampled along its arcs inside the
outline and must not cross or touch it, and the material capture names the
display perimeter when a cut crosses it.
A support bed that cannot hold a blank level and a pierce zone both steer perimeter-led planning paths. A blank has no cut perimeter, so both settings must still plan only its cutouts, with every cut inside them.
The posts treat every non-lead feed move as a cut, so an applied blank's
display tail, or the outline of a blank posted without a plan, would have
been cut along the blank's edge. The pre-post review counted that outline
as an ordinary cutting contour.
Cincinnati, CI Fiber and the engraver now read part programs through
DisplayPerimeterTail.ForPosting: an applied program posts exactly what the
same program posts with its tail removed by hand, and an unplanned display
perimeter is refused with a message that names the part and points to Plan
Cutting. The pre-post review reports the unplanned outline by name.
Place Lead-in built its contours from cut-layer entities only, so on a
blank the largest cutout looked like the outside and took an external
lead pierced on the blank; committing then regenerated the part with the
outline as a cut perimeter. The legacy whole-part strategy did the same.
Both strategies now refuse a program with a display perimeter and leave
the part unchanged, and Place Lead-in explains that such a part's cutouts
get their leads from Plan Cutting instead of selecting it.
An applied cutting program for a display-perimeter blank held only its
cutouts, so the part shrank to them: a 30 x 20 door reported an 11.5 x 20
extent, overlap and the plate view lost the blank, and running automatic
cut-offs afterwards added lines straight through it.
A complete emission now ends with a display tail: a marker comment, a
rapid to the outline and the outline on the display perimeter layer. The
part keeps the blank's bounds and material, so later cut-offs still have
nothing to cut and the door plans again as before. Nothing executes the
tail: executed reads stop at the marker, so search, replay and the
pre-post review see only the cuts, and cut time, the rapid display and the
cut simulation leave it out. DisplayPerimeterTail.ForPosting gives posts
the program without it and refuses an unplanned display perimeter.
Review found three blanks that slipped past or failed silently. Enclosure
was checked against the outline's bounding box, so a cutout in the notch of
an L-shaped blank reached an unverified plan that warning acceptance could
apply; every cut point is now tested inside the outline itself, and the
material capture names the display perimeter when no ring encloses the
rest. A blank whose only cutouts are tabbed left the search with nothing
to choose and ended without a finding; it is now refused with its reason,
as is a blank with nothing to cut, which used to get only the generic
noncutting message. None of these offers even an unverified plan.
Clean-bounds containment, seam overcut trimming and incremental closure
drift now treat the display perimeter like the other material boundaries.
A display perimeter written without its own tag reloaded as an ordinary
cut, so a saved blank would come back with its outline to be cut. Programs
now carry it as :DISPLAYPERIMETER and the reader maps it back, and stored
source entities keep the DISPLAY PERIMETER layer so editing the drawing
rebuilds the same never-cut outline.
Builds older than this read the unknown tag as a cut. Open nests with
display perimeters only in builds that include this change.
Some jobs cut only cutouts into a supplied blank, such as instrument holes
in a purchased door that is the whole sheet. Its outline has to be known
to the planner (the blank is material that leads, rapids and cut-offs must
respect) but must never be pierced, led or cut.
A new DisplayPerimeter layer marks that outline. It is material, so
nesting, containment, lead clearance and automatic cut-offs all see the
blank; a door that fills its sheet leaves cut-offs nothing to cut. Cutting
preparation keeps it out of the contours entirely: with no cut perimeter
every contour is a hole with internal leads, and the search, best-effort
and safest-route paths stop offering a perimeter. Replay refuses any run
along the display perimeter and completes once every other ring is cut.
A display perimeter must be one whole closed contour enclosing every other
contour; a mixed ring, one inside another contour, or a second one is
refused with that reason. Saving, drawing and posting it are still to do.
The release dialog's Add a set box was a pure type-ahead: it queried the
server only after typing paused, so opening it, or clicking its arrow with
nothing typed, showed an empty list. From Drawing Sets > Release that was
easy to miss, but New Release starts with nothing listed, and an empty
dropdown there reads as a missing server connection. The dialog now reads
the first active sets by name when it is shown, and again when the list is
opened while still empty, without dropping the list open on its own; typing
narrows it as before.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Releases could only be reached through one set or one library drawing, so
seeing what the shop released lately meant knowing which set to open first.
File > Releases shows every release on the server, newest first, naming what
each one had ("Kit A ×2, Kit B; Bracket ×4") in place of the per-set
revision and kits, with the same nest list and Undo Release. New Release
opens the release dialog empty, so a release can start from the list rather
than from a set; the plan builder now accepts no lines as an empty plan,
and the dialog's Release button stays disabled until a group is listed.
The list re-reads from the newest page once the dialog records a release.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Operators had to know that 16 ga is 0.0598 to enter a thickness. The Nest
Info and Save to Drawing Library thickness boxes now list steel gauges
(26-3 ga) and plate fractions (1/16"-2") with their decimals, and read a
typed gauge ("16ga", "#16"), any fraction ("3/32", "1-1/4") or a decimal.
Unreadable text blocks OK/Save instead of reading as zero.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Delete during placement went to the plate view's delete-selected path, which
treated the unplaced previews as selected parts and deselected them, so they
drew solid like placed parts. Route Delete to the clone action instead (its
own handler, which removes the originals when cloning placed parts, never ran)
and re-flag the previews as selected whenever they are reselected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After adding library drawings the operator had to close the dialog to see what
the nest now needed, and fixing a quantity meant leaving it for Edit Drawing
one part at a time. The new In This Nest tab lists the nest's drawings (cutoffs
excluded) with their library revision and required, nested and remaining
quantities, refreshes after each add, and edits Required in place.
An edit applies to the nest immediately, like an add, and the nest window
refreshes its drawing list when the dialog closes. Out-of-range values are
refused both when the cell is validated and when they are applied, because
DataGridView only validates on leaving the cell and EndEdit commits without it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Release dialog lists sets and drawings in one grid (with a type
column; Kits / Qty is a set's kits or a drawing's quantity, up to
100,000). Add Drawings... browses the library as the set editor's pane
does and stays open for several adds; listed drawings are greyed and
skipped, archived ones refused. The Drawings tab gains Release... (when
opened from a nest) to start a release from one drawing, and
Releases... so a release of drawings alone can still be found and
undone, since it belongs to no set's history.
docs/nest-storage.md describes the desktop flow, the `drawings` wire
field, null item setId, the drawingId query/probe and schema v11.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5