Part sub-program calls restored the sheet frame with G92 at the part
corner while the tool sat at the sub-program's last endpoint, shifting
every later part. The call now raises the head, rapids back to local 0,0
and restores there. Parts share a sub-program only when their posted
toolpaths match, so per-part lead-ins are kept.
Suppressed moves are left uncut: the cut resumes with a rapid past them.
Head raises go before the rapid that leaves a feature, one per rapid:
the safety raise now precedes the rapid to a new part instead of
following its first feature, and sub-program mode no longer posts M47
then M47 P2000. M47Mode.Auto posts M47 before rapids longer than
M47OverrideDistanceThreshold and /M47 otherwise. ExteriorM47 applies to
the contour spanning the part's cut extents.
The sheet GOTO targets FeatureLineNumberStart and is omitted without line
numbers. PrepareForNest pre-selects only the gas- and thickness-matching
library. Part programs are read through absolute copies, never switched
to absolute in place.
Removes the unimplemented UseSheetSubprograms, CoordModeBetweenParts and
ProcessParameterMode (G89Mode); old configs still load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hole sub-programs are stored incremental but were written under G90 as
if absolute, producing invalid arcs. The registry now posts absolute
copies and leaves the nest's programs untouched.
Sheet-level hole calls omitted the part location from G52, so every
part's holes were cut near the sheet origin. Calls now shift to the
part location plus the hole offset.
Hole calls were matched to sub-programs by call id, which planned
emission numbers 1, 2, ... per drawing, so holes from different drawings
shared the first drawing's sub-program and diameter. Calls are now keyed
by program reference and deduplicated by posted toolpath.
A part opening with a hole call got a synthetic rapid that posted an
empty pierce on the part edge. The rapid is now only inserted before a
contour motion with no rapid ahead of it; the hole call carries the
part comment and safety head raise that feature used to hold.
The sheet writer re-sorted parts bottom-then-left with cut-offs last.
Plate order is the cut sequence, so parts now post in plate order.
Regression tests replay the posted G-code for off-origin parts of
several drawings and check each hole's center and radius.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Breakoffs are now picked by their joining line, default to the smaller side as scrap
(flippable), and cut that line between tabs on a new Break layer instead of slots.
Plan Cutting and Assign Lead-ins enter each cut from the scrap with the nest's internal
lead-in, or pierce on the line without one; checks treat break cuts as intentional open
cuts that are not material.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
b0997f6 moved every cut-off after the parts. Plate.Parts order is the
cut sequence, and the user sets each cut-off's place in it (Set
Sequence), so the post must follow it rather than reorder. Cut-offs
still post as uncompensated open lines with no lead-in.
The machine owner confirmed M50 swaps pallets (the sample's M50 before
M30 moves the cut sheet out for unloading). Only the single-program
between-sheet sequence remains unconfirmed.
Multi-sheet nests previously went into one program with a single header
size and one M50 at the end, so sheet 2 would cut into sheet 1's
skeleton. New Sheets settings:
- One program per sheet (default on): JOB.cnc -> JOB-1.cnc, JOB-2.cnc,
each a full program with its own size and pallet change (CL-series
batch rule, EM-423 7.4). Single-sheet nests keep the chosen name.
- Off: one program, with /L "L0" + pallet change between sheets;
mixed sheet sizes are rejected.
- Pallet change code (default M50, unconfirmed for multi-sheet CI Fiber
runs; documented as a release blocker).
All sheets are validated and rendered before any file is written.
IMultiFilePostProcessor lets the desktop app confirm overwrites of every
target file and list what was saved, and the console print each file.
A fixed override wrote the same text on every part, making parts
indistinguishable in the program. Each part's ( PART:... ) comment now
always uses its source file or drawing name. Saved configs that still
contain PartComment load normally; the key is ignored.
System.Text.Json rebuilds MaterialCodes with the default ordinal comparer,
so a saved config matched 'Mild Steel' but not 'mild steel' and silently
fell back to the default code. The setter now re-keys assigned maps
case-insensitively.
Replace the generic PropertyGrid for configs that opt in via
PostSettingAttribute: a section list (Machine, Material, Program output,
Macros) with labelled fields, help text, numeric ranges and an editable
material-code table. Edits apply only when OK validates every field.
Unannotated configs (Cincinnati CL, GravographIS) keep the PropertyGrid.
Posting a nest with a sheet cut-off threw because the CI Fiber writer
treated every contour as a compensated part contour and requires a
linear lead-in after G41/G42 (TF5200 13.2.4.1). Cut-offs are open
centreline cuts with no lead-in and no inside/outside, so they now post
without G41/G42 and run after every part on the sheet so the sheet is
not severed before the parts are cut (matching the CL post).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New post-processor plugin OpenNest.Posts.CincinnatiCIFiber for the CI
Fiber laser family (nLight CLX / Beckhoff TF5200 / Precitec ProCutter,
e.g. the CI Fiber 4020 8kW). Named by machine family, not table size.
Emits the machine program contract of the Cincinnati-supplied sample NC
(12992-4SS_NEST.nc): V.E.* header, restart jump, per-part V.E.R4 blocks,
per-contour N labels with V.E.R3, skippable /L macro lines (L0/L2+G41
interior, L4+G42 exterior, L6 cut-on, ZHSOFF cut-end), G162 incremental
arc I/J, trimmed 3-decimal spaceless coordinates, CRLF, M50/M30/%.
Contour classification (interior vs exterior) derives from the material
side of the closed cut path, not hardcoded winding. SubProgramCall holes
are flattened to sheet coordinates (rotation-safe). Arc lead-ins are
rejected per TF5200 13.2.4.1 (first motion block after G41/G42 selection
must be linear). Table envelope (default 160.25 x 81.25 in) validated.
Tests: structure golden on a square-with-hole nest, rotated-hole flatten,
coordinate format, arc-lead-in rejection, table validation, suppressed/
scribe skipping, plus a SkippableFact regression against the real sample
NC (109 parts, 2071 contours, L2=1962, L4=109, perimeter vertices match
within 0.001). Fixtures configure through OpenNest.Tests/test-config.json
and the regression skips when absent.
Group the Cincinnati and GravographIS plugin projects in a Posts/
folder so new machine posts have one home. Project names, namespaces,
and the runtime Posts/ deploy target are unchanged; only relative
paths in the solution and project references move.
ajandClaude Opus 5.5