Irregular picks each sheet's stock on an estimate of what the leftovers
will cost, so a size that took every remaining part could lose the pick
to a plan that ended up dearer, and its trial sheet was thrown away.
Each pass now keeps those finished plans: one that beats the pass's own
plan replaces it, and the rest are reported as alternatives (at most six
a pass). No extra sheets are packed.
The progress window's layout families now include the sheet sizes, so a
one-sheet 60 x 120 layout is offered beside a one-sheet 48 x 144 best
instead of being dropped as a near copy.
With 48 x 96, 48 x 144 and 60 x 120 offered, the seven sample parts (130
copies) still take one 48 x 144 sheet and now end at 130.7" instead of
136.6"; the tutorial and synthetic nests are unchanged.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Auto Nest progress window lists up to three whole-job layouts as
cards, the engine's best first and then the best of each other family
(sheet count and free-strip direction). Every sheet shows the distance
from its parts to the right edge (vertical strips) or the top
(horizontal strips), dimensioned on the sheet. Any card can be used:
during the search it stops it, and a finished search with more than one
layout waits for the pick. The layout used is validated and bound like
the engine's own result.
Engines may report plans that lost to their best as
NestJobStage.PlanAlternative; Irregular, Default and the time-limited
solve do. Reporting never changes a layout.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
- Lattice band certification prepares each member's outline once instead of
re-inflating both parts for every pair (about 40% of each pattern's cost).
- Strip packing builds each beam level's band searches ahead in parallel,
each on its own drawing copy; prefetched patterns charge no work and bind
no orientations until requested in strip order, so the work meter and
results match building them in turn.
- FrontierPacker blocks seated parts in one parallel pass, not one per part.
Layouts and work counts are unchanged on the README, clamp-rail, 2x and
tutorial jobs and the synthetic nests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A sheet that cannot take all the remaining parts now keeps whichever
places more part area: the ordinary fill or strips largest part first.
The ordinary fill spent skinny parts early because they cover the most
area per length, leaving awkward ones for a ragged last sheet.
Inside a strip, the strip's own part fills its column first and the
others fill around it; before, pairs of smaller parts (counted as twice
a part's area) took the strip and the large part lost it. Bands also try
largest part first as a third order.
At about twice the README sample quantities the second sheet ends at
99.9" instead of 106.2" on master (104.7" before this change), and the
help tutorial's parts at 33.6" instead of 34.9". Every other benchmark
job is unchanged or better; mixed jobs solve about two to three times
slower than master.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Irregular decodes the job once more in full-height strips along X when
like parts group and every part shares one priority. A sheet that can
take all the remaining parts is packed two ways and the better kept:
- Bands: each type of three or more copies as its Lattice pattern in the
narrowest strip that holds all its copies, bands side by side, the
held-back copies and one-offs filling the gaps.
- Strips: each strip holds the largest remaining part, as its band or a
column one to three copies wide, every other part filling its gaps; a
beam of the four densest partial sheets carries strip to strip.
Band patterns are filled one grid unit wider than the spacing so a stack
of rings passes the strict certification, members on a clamp go to the
gap fill, and a short band moves flush to the far edge when that keeps
it off the clamps. The plan replaces the result only by beating it.
On seven sample parts (130 copies, 60 x 120) the layout ends at 102.9"
instead of 107.7", and at 104.6" instead of 108.6" with the desktop's
edge spacing and bottom clamp rail; at about twice the quantities the
second sheet ends at 104.7" instead of 106.2". Every other benchmark job
is unchanged. Solves of these jobs take about twice as long.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest left N26-2A5 (14 door stops, 14 lock plates on a clamped 26x26
sheet) 8.0 high, while the shop's hand layout holds all 28 under 7.5 and
leaves a half-inch-deeper drop. Every MaxRects fit rule packs into the
whole sheet, so with room to spare it spreads the parts out and never
looks for the shortest strip.
When a rule places all the remaining demand, Rectangles now repacks it
into shorter and narrower bins, every rule and mode per probe, and offers
the tightest complete layout per axis to the stock loop, which still
picks by cost and offcut. Fit is not monotonic in bin size (7.5 packs,
7.62 and 7.74 do not), so probes walk down through stack heights (sums of
spaced part sides from the bin edge or a reached clamp) instead of
bisecting. A placement budget skips sheets finishing ~2000+ parts.
Benchmark, Rectangles on 80 recent production nests with salvage credit:
11 cheaper, 0 worse, all valid, total time 14.7 s -> 13.2 s.
The zero-clamp hash is re-captured (the squeezed layout is narrower);
the far-clamp test now compares poses, since the clamp can reorder an
identical layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fill paired a 9" angle bracket at 90/270 degrees (75 on a 48 x 96 plate)
while a hand-laid herringbone at 315/135 holds 84. Its pair touches only at
the legs' ends, so it ranked ~888th by pair box area, and pairs are tiled
at the pair's own hull angles, never the part's 45-degree edge.
The pairs phase now also builds herringbone pairs: the part turned so a
hull edge lies along a sheet axis, its 180-degree copy slid onto the row
the part makes along that axis, tiled and remnant-filled like best-fit
pairs. Fill now finds the 84.
The chevron in the learned-angle fixture became a herringbone whatever
angles were learned, so a cross replaces it; the learned-angle and Strip
mixed nests are re-pinned.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fill tiled 8" gussets on a 16.85 x 60 strip as seven pairs in a 10.35"
column (14) and left a strip too narrow for a gusset square on. Sliding
each pair along its hypotenuse so six span the height narrows the column
to 8.75" and leaves a strip that holds eight more turned 45 degrees (20),
as laid out by hand.
- The pair remnant filler tries strips down to the part's narrowest hull
width and tiles single best-fit pairs as a grid there, taking the grid
only when it places more than the rows of pairs.
- After the pair filler's early exit it also tries skipped candidates
whose grid plus an optimistic leftover-strip estimate could still win,
keeping one only when it places more parts.
- The optimistic remnant bound counts parts by true area, not bounding
box, so interlocking parts no longer prune winning candidates.
The mixed Fill nest pin now places 34 instead of 33; the mixed Strip nest
keeps 35 with its L-shapes laid out differently. Both pass the layout check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After the fill strategies, the winning layout's outermost row on each side
is pushed into the edge slack, slid toward one end, and copies of its end
part are slid in from the freed end. Lifting a staggered hexagon row straight
over the one below opens a notch where one more nests: a 7" hex cover on a
60 x 120 sheet now fills 181 instead of 180. The policy's comparer must
prefer the result and the requested quantity caps it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pair filler topped its grid off with single parts at 0 or 90 degrees,
so a narrow strip beside the grid held half of what it could: on a 60x120
sheet of N26-29X parts the plate fill gave 132, while deleting the last
column and filling the strip gave 136. The strip is now also laid out the
way the Row strategy lays one, rows of best-fit pairs turned so whole pairs
span it, and that layout replaces the singles when it places more.
Each strip size is laid out once per fill and skipped when the singles
already fill it by area. On the benchmark nest the plate fill now reaches
136 with the hand-made layout's rotations, about 17% slower (156 s vs
133 s with best fits cached). The pinned L-shape fills gain a part (52 to
53). The auto-nest problem-nest corpus keeps its baseline.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Irregular engine grows each sheet from one side, so parts that fit only
when the outer ones hug opposite edges never met: ten one-off brackets
(four tapered 112-inch bars, four gussets, two small plates) stacked three bars
on one sheet and took three 60 x 120 sheets where two hold them.
After the search, a sheet-reduction pass splits a complete single-stock plan
over one sheet fewer and packs each sheet edge first: large parts to the
corners (flush, most outline on the edges, thinnest across the sheet), small
parts into the gaps last, and one key part into the pocket between. Clamped
sides move in past the keep-outs so edge parts line up on one straight edge.
When no sampled orientation fits the key, ContactFit turns it by its contacts
(each overlap a linear constraint on dx, dy and rotation) instead of sampling
more angles; the exact no-fit free region then confirms the angle, so spacing
and validation are unchanged. That job now nests on two sheets, the middle bar
at 4.4 degrees; the repository benchmark jobs are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Slice 3 of common-line cutting. On costly plate (N26-295: 3/16 RA310S at about
$2,500 a sheet) pairing parts one kerf apart fits the part the spacing cannot:
the last plate's 38 parts fit on one 48x120 with Auto Nest only with pairs.
- Drawing Properties gains "Allow common line" (Drawing.AllowCommonLine, off by
default because customer edge-quality needs vary). The nest's CommonLineUsage
(Off / When it adds parts / Whenever available) is set in Auto Nest and seeded
from Tools > Nest Defaults; both persist (nest.json, defaults.json).
- NestPipeline runs the ordinary solve, then, with a level on, trials where
eligible parts are offered as kerf-gap pair compounds. Placed pairs expand into
parts plus explicit NestJobCommonLine groups, are validated again, and
CommonLineRanking keeps a trial only by the level: count first, then sheets;
"when it adds parts" keeps the plain layout on a tie, "whenever" also takes a
shorter cut or less material, never at the cost of a part. Engines, FillScore
and their comparers are unchanged; Off asks the engine exactly what it did.
- NestLayoutCheck exempts members only through a sheet's explicit group list and
only when the job allows common lines; materializing and committing create
Plate.CommonLines.
- Server nesting writes common-line jobs as version 3 and replays the recorded
trial answers, so the desktop binds the same groups.
- Fill Area honors the level through a PlateFillService overload.
- The benchmark gains --common-lines <level> --kerf <k>.
Benchmark (synthetic nests + N26-295, --parallel 1): with no flag and with
--common-lines off every engine matches the base commit; with a level on no
layout becomes invalid and three runs save a sheet at equal nested area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The multi-phase fill engine and strategy is named Lattice; the docs still
called it Fill in several places. Generic fill passes stay lowercase and
the renamed-engines alias table is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Circle fill strategy's stripe layouts (FillEndOdd, FillEndEven) now try
switching from staggered to straight stripes, a diameter apart over the last
staggered stripe, at every stripe, all staggered and all straight included,
and keep the switch that places the most; a tie stays staggered. A 9" circle
on a 60x120 sheet at 0.2 spacing now fills 89 (five staggered rows, two
straight) instead of 88.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Priority worked like a rank (lower first) with a default of 0, and the
Edit Drawing form stopped at 0, so moving one part ahead of the rest
meant renumbering every other drawing. Higher-first lets a user raise a
single part to 1 and leave everything else at the default.
Every engine, filler and candidate comparer now serves the highest tier
first. Stored values keep their order:
- .nest files add `nestPriority` and keep writing the negated value under
`priority`, so older readers nest in the same order; files without
`nestPriority` are negated on read. Drawing packages strip both, so
package hashes are unchanged.
- Library settings send both keys the same way for older clients.
- Server schema v18 negates stored drawing priorities (an older server
refuses the upgraded database).
- Job documents move to version 2; version 1 jobs are converted, and an
older worker refuses version 2 instead of reversing the order.
The Edit Drawing form now accepts negative priorities and says higher
numbers nest first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After its six variants and tail re-plan, Irregular decodes the job again
with each type of three or more copies packed as one group, in a searched
order, holding back up to four copies per group that would start a ragged
row and filling them into the gaps afterward. When everything fits, the
best candidates are re-packed in a strip ending just short of the front.
The pass runs after the ungrouped search, which is unchanged, and replaces
its result only by beating it. The help tutorial's parts now end at 34.9"
instead of 38.1" on 60 x 120.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Search insert selections as boxes with a counted beam search over maximal
free rectangles, pair low-density parts with their half turn, then gap-fill
with the frontier packer. The router takes it on seated outline area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Compare cutout proposals, frame angles and bundles by insert outline area,
and add bounded largest-first packer candidates so big parts get the first
move in an empty hole. On the real job the four frames go from 54-70% to
77-81% filled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The spiral used only the least-waste rows and columns. Those often make
one pair of blocks the larger on both axes, so it overlapped itself and
placed nothing, leaving Fill at two blocks. It now also tries every
four-block combination and takes one that holds more parts than both the
least-waste spiral and the two-block layout, so ties keep today's layout.
A 9 x 6.5 part on a 60 x 120 sheet goes from 109 to 112.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"Fill" said nothing about what the engine does, since every engine fills.
It is now Lattice, and Fill stays an alias, so saved selections, scripts
and API requests keep working. Engine descriptions are rewritten in plain
language and shown beside each name in the desktop engine lists; the main
toolbar's tooltip also says when Fill Area falls back to Lattice.
Docs also cover the leftover placement from the previous commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Whole-job fills treated clamps as occupied space, so a clamped edge cost
a row: 8.25in circles stopped at 96 on a sheet the plate fill packs with
102. When one drawing still has unmet demand, also fill the sheet as if
the clamps were absent, drop the parts on them and keep the better
layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Equal-cost plans break ties by the largest edge offcut, from any of the
four edges. A caller that wants the leftover off one way, such as a
shop that keeps only end drops, or a benchmark scoring the used sheet
height, had no way to say so. On the converted Nestbolt jobs the
extended Irregular search then found plans whose larger offcut is a
strip down the side, which Nestbolt scores as worse: b-blaz1-strip
3.601 -> 3.867, b-shirts-strip 2.674 -> 2.995.
NestJobOptions.OffcutCut (a CutOffAxis, default null) counts only the
strips one cut along that axis frees, for salvage credit and the
compactness tie-break alike: Horizontal the full-width bottom and top
strips, Vertical the full-length sides. PlateRemnant.LargestOffcut takes
the axis; NestJobCost, the time limit and clamp-removal recovery pass
it on. Unset, nothing changes.
Benchmark manifests accept "offcutCut": "horizontal" or "vertical".
With horizontal, one CPU, 20 s limit, Default:
b-blaz1-strip 3.934 -> 3.333
b-shirts-strip 2.995 -> 2.610
m-box-deep 1.918 -> 1.276 (Nestbolt 1.251)
Manifests accept only the words horizontal or vertical (any case); a
list such as "horizontal,vertical" is rejected. PlateRemnant rejects an
undefined axis. Fixed strategies keep their own no-salvage tie-break
and ignore the option; desktop, Console and MCP do not offer it yet.
Mutation reds: 14/14 (offcut-mutations.py).
Under a time limit, Irregular often finished in about a second and left
the rest unused: on the converted Nestbolt b-jakobs1 job it used five
sheets where four fit.
NestJobOptions.SearchUntilCancelled asks an engine to keep searching
after its normal search until the token is cancelled.
DeadlineNestingEngine sets it. Irregular then re-runs its six variants
with seeded per-type weights on its placement rule (seeds 1, 2, 3, ...,
each weight within e^+-0.4), reports each plan that beats its best,
then re-plans that plan's tail and reports any gain. It skips this when
the token cannot be cancelled, nobody listens for progress, nothing is
placeable, or the job has one part type, so unlimited solves are
unchanged.
Default now runs Irregular last (Rectangles, Circles, Irregular) so
Circles still runs, and chooses only after every candidate has run, in
tie-break order, so the run order never changes the choice. Unlimited
choices match the old run order {Rectangles, Irregular, Circles} except
when three candidates are near-tied within the 1e-9 comparison
tolerance without being transitively ordered (only on all-round jobs,
where Circles bids).
b-jakobs1 on one CPU, 10 s limit: 5 sheets (4.500) -> 4 (3.751).
DeadlineNestingEngine used CancelAfter, a thread-pool timer. A CPU-bound
Parallel.For keeps pool threads on their own local work, so the timer
callback can run seconds late; pinned to one CPU it waited for the
whole best-fit search (m-sign-3 under a 10 s limit returned at 64.5 s).
A dedicated background thread now waits for the limit, or for the
solve to finish, and cancels; the solve joins it before returning.
A test runs a CPU-bound Parallel.For from a pool thread under a 200 ms
limit and requires the solve to end within 3 s; with CancelAfter it
took about 7 s.
DeadlineNestingEngine wraps any engine with a wall-clock limit (any positive time up to
the cancellation timer's ~49.7 days). An engine that finishes in time
keeps its result, as does a result it returns after the limit. When the
limit cancels it, the best whole-job plan it reported (PlanImproved,
ranked like Default ranks candidates, a tie going to the later plan) is
returned if it passes the layout check; with none the solve fails with
TimeoutException. The caller's own cancellation is never turned into a
result. Engine plate commits are dropped and the returned result's
commits reported once it is known; plans are forwarded only when they
beat every plan shown so far.
Default now runs Rectangles, then Irregular, then Circles, so a search
stopped early already holds a valid plan. Ties still break by candidate
order (Irregular, Rectangles, Circles), so for these three the choice is
unchanged, and when every candidate throws, the first in that order is
still the one rethrown. A test seam takes a run order. Desktop, Console
and MCP do not apply a limit yet; Console can solve a job twice (cutout
trial and plain), which needs one shared deadline.
Mutations killed (10/10): no fallback at the limit, invalid plan
accepted, caller cancellation becomes a result, engine commits
forwarded, a worse later plan replaces the best, a tie keeps the earlier
plan, no upper limit bound, failure rethrown in run order, built-in run
order unchanged, run order ignored.
The repo mixed variants such as center/centre and color/colour, so a
name could be spelled either way and searches missed half the hits.
Standardize on the US spelling, matching .NET's own APIs (Color, Center).
Wire values owned by other systems keep their spelling: the material
ledger's "Cancelled" hold status and GitHub's "cancelled" job status.
No behavior change beyond the spelling of a few status messages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A clamp rail can now carry its own Clearance, the gap parts keep from
every clamp footprint, independent of part spacing. Unset, it keeps the
sheet's bottom edge spacing as before. Clamp blocks drawn under the
sheet can use close to zero so the laser only stays off them.
Plate.ClampClearance and NestPlateStock.ClampClearance resolve it once;
the engines, interactive fill/pack/push, the layout check, Expander walls
and automatic cut-off placement all read it. The interactive push now
holds clamps at their square clearance keep-out (the layout check's
shape) instead of the part spacing, so parts no longer tuck into its
corners; the clamped fill characterization digests are re-pinned after
checking the new layouts validate.
Persisted as an optional `clearance` on the .nest clamp rail and the
machine clamp settings; edited in Nest > Clamps and the machine's
Clamps tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NestPlateStock carries the outline; its usable material (less obstacles,
eroded by the largest edge spacing) becomes the FrontierPacker's
PackBoundary. The layout check and the runner's candidate validation
reject a part outside the outline or over an obstacle, area-based cost
and the area budget use the material area, salvage credits nothing, and
Rectangles, Circles, FlatBar and the fill strategies place nothing on it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
CutoutPackerProposal runs the Irregular engine's FrontierPacker on one
hole, frame-local, with the hole as its boundary and already seated
inserts as obstacles, for all six strategy variants; every pose is
certified with NestLayoutCheck.Clears against the frame, the occupants
and the other poses, and the variant seating the most copies wins, ties
going to the tighter layout. CutoutRouter keeps that proposal over the
lattice-and-NFP one when it seats more copies, or the same number more
compactly, so the pre-pass gets it on every non-round hole.
Two copies of a bar in a frame window, which the lattice never tried and
the sampled NFP search scattered across the window (one at the inner
fit's centre), now stand together against one wall. The test rebuilds
that frame and bar from embedded G-code; the residual-accounting
pipeline tests use a hole that holds one insert so their second copy
stays an ordinary requirement.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The cutout pre-pass offered lattice/NFP inserts only when they had no
cutouts at all, so a strap with 0.25" bolt holes was never tried in a
frame's window. On N26-264 that left both PT11s loose on the sheet and
Rectangles' staggered PT10s won, although both PT11s fit one PT10's end
window. Holes matter only if another part could land in them, so a part
whose every cutout is smaller in area than the job's smallest outline is
now an ordinary insert; proxies and parts with usable holes stay out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BestFitFinder gathered each rotation strategy's candidates, and PairEvaluator
gathered evaluated results, in ConcurrentBags, so their order depended on which
worker finished first. The stable area sort then broke equal-area ties in that
arbitrary order, and fills, which try candidates in order and keep the first of
equal layouts, could nest the same parts differently between runs.
Both now fill index-addressed slots: candidates keep rotation-angle and
slide-offset order, results keep candidate order, and ties break the same way
every run. The candidates produced and their scores are unchanged.
The Strip whole-job pin in FillStackCharacterizationTests is re-pinned
(A66602F707290A36 -> FD03A4529D37E32C). That job ties between best-fit
pairs; the old pin recorded whichever tied pair the bag happened to return
first. The new layout places the same 26 parts, passes LayoutAssert.Valid
and gave the same digest in five separate test processes. The other 28
pins are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
StripPlateNester sent every request to the strip fills, which try two
classification angles and ignore rotation bounds. With a fixed or bounded
rotation at quantity above one they proposed forbidden poses, the job
validator threw "Candidate rotation is not allowed for the requirement."
and the whole Strip job failed. Strip now uses the same guard as
DefaultPlateNester and hands such plates to OrderedPlateNester.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every whole-job engine chooses among the offered stock sizes, and on the
synthetic benchmark nests Default matched or beat StockLadder on all 18
runs (saved sizes, a six-size pool, with and without salvage credit),
costing 30-40% less in total with mixed sizes. Its sheet-swap step never
produced a win over Irregular's tail re-plan.
The registry maps "StockLadder" to Default so saved selections, scripts
and API requests keep working. OrderedPlateNester stays: Fill and the
remnant strategies use it for restricted rotations, and its golden layout
is now pinned through NestJobRunner with the parts requested largest
first, as StockLadder requested them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without salvage credit (desktop Auto Nest on a single plate size) every
complete one-sheet layout costs the same, so engines kept whichever layout
came first. N26-23S nested 27.86" long when turning two parts fits it in
21.3".
NestJobCost.CompactnessOffcut measures the largest full-width/full-length
edge offcut as salvage does, whatever the salvage rate. Default and Circles
(CandidateScore), Rectangles and Circles sheet choice (SheetByStock) and
Irregular sheet and plan ranking use it only after cost, so no cost changes.
Sheet-level keys round to 1e-6 to keep ties platform-independent.
Rectangles layout digests are re-captured: each changed fixture keeps its
sheets, parts and cost and leaves a larger offcut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fill only tried 0 and 90 degrees for parts classified as rectangles, so a long
part filling a 60 x 120 plate four high at 90 degrees left a 55 x 59 strip empty
although two more fit tilted about 33 degrees (a reported nest: 4 placed, 6 fit).
The second tilted part only fits with its corner tucked beside the grid, in the
strip the grid's slack leaves, so a plain rectangular remnant fill finds one.
TiltedRemnant runs after the other strategies. It moves the best layout flush to
one end so leftover room becomes one remnant, and to either end of the other axis
so its slack forms one strip; then tiles the part at the most upright angles that
fit the remnant's height and keeps only copies at least the part spacing from the
layout. It is skipped when the part fits the remnant upright, for circles, for an
explicit rotation range and once the requested quantity is placed.
Fill benchmark (--parallel 1): the synthetic set is unchanged (all valid, same
cost and plates). The reported part needs 1 sheet instead of 2 for 6 parts and
2 instead of 3 for 12.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Desktop Auto Nest's "Best plan so far" strip now fills in for every built-in
whole-job engine except FlatBar, not only Irregular.
- Rectangles makes one sheet-by-sheet run, so it reports the finished job as
its one plan, then replays its plate commits (token checked as before).
- Circles reports when a stock-preference run or a tail re-plan beats its
best result so far.
- Default scores each candidate plan as it ranks results (valid, fewest
unplaced, lowest cost, candidate order) and reports it only when it beats
every plan already shown, so a later candidate never shows a worse plan.
The chosen result is always the last plan reported.
- Shared ReportPlan/SameLayout helpers on CandidateProgress; Irregular uses
them too. Reporting never changes the search.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest no longer draws parts on the plate view before they are kept:
its result is a set of sheets, possibly of several sizes, not parts on the
current plate. Ghost parts stay with interactive Fill and remnant tools.
- NestJobStage.PlanImproved carries an engine's best whole-job plan so far;
Irregular reports one whenever a variant or the tail re-plan beats it.
- NestPipeline adds PlanSheets: the plan on detached drawings built from
the job geometry (with the caller's names and colors), so previews never
touch caller drawings or quantities.
- SheetStripControl draws every sheet side by side at one scale, repeats
once with their count, captioned with size, parts and utilization.
- The progress window shows "Best plan so far"; a review window shows the
final sheets, totals, cost summary and unplaced parts before commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NestProgress gains PreviewSheet, a detached plate for the stock the preview
parts lie on; Irregular builds one per stock. PlateView draws it (size, edge
spacing, clamps) in place of the plate while the preview is shown and drops
it whenever the preview is cleared or the plate changes. Auto Nest zooms out
when a trial sheet falls outside what it has already shown.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The frontier packer reports its placements after each choice; the engine
turns them into preview parts at most four times a second and sends them as
NestProgress.BestParts with the stock work area, which desktop Auto Nest
already draws on the plate view. Reporting only reads finished placements,
so layouts are unchanged with or without a progress sink.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every Auto Nest run, and every Default-engine run, recomputed each part's
best-fit pairs: job snapshots are fresh objects and BestFitCache keyed
its entries on Drawing reference, so the Irregular engine paid
PairCatalog.Build (about half of a 118-part solve) on every run of the
same drawings.
BestFitCache now keeps a process-wide, bounded (512 sets, least recently
used first) pool of unfiltered candidate sets keyed by the exact content
of a PartGeometrySnapshot (mode and every motion value, bit for bit;
PartGeometrySnapshot.ContentComparer) and the spacing. Every drawing
DrawingJobMapper.CreateDrawing reconstructs from a snapshot declares
that geometry (BestFitCache.ShareByGeometry), so the Irregular pairs and
blocks, the cutout lattice and the Fill/Default job paths all read and
fill the pool. Candidates depend on the program geometry and spacing
alone, so a pooled set is the set the search would produce: benchmark
layouts, costs and placements are unchanged on the synthetic nests (all
engines) and on the 67-drawing, 118-part job. Failed searches are not
pooled, Invalidate leaves the pool alone, Clear empties it, and a
drawing whose Program is replaced stops vouching for its geometry.
Same 118-part job solved twice in one benchmark process (--parallel 1):
the second solve now takes 13.1 s after a 33.0 s first; before, 35.6 s
after 41.8 s.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A 67-drawing, 118-part job took about six minutes through the desktop
Auto Nest path and was cancelled before any layout appeared. Almost all
of it was the cutout pre-pass, the rest the Irregular engine.
Cutout pre-pass (317 s -> 8 s on that job, same bundles and poses):
- The lattice and NFP searches prepare the frame's and the occupants'
validation outlines once per search (NestLayoutCheck.Prepare) instead
of re-outlining and re-triangulating the frame at every candidate, and
test candidates against the small occupants before the frame. Answers
match the pairwise check exactly, including its leftmost-inflated rule.
- A hole's proposal is replayed for the same frame, hole and offered
inserts: automatic-rotation inserts ask the same question at every
frame angle.
Irregular engine (40 s -> 15 s, benchmark 42 s -> 19 s, same layouts):
- Concave no-fit polygons are built as the union of pairwise convex sums
of each footprint's convex pieces (ear clipping plus Hertel-Mehlhorn
merging on the Clipper lattice) instead of n*m edge-pair quads; a
footprint that cannot be decomposed keeps the old sweep.
- Pair and block catalogs share one private drawing per part geometry,
owned by the engine instance, so each part's best-fit search runs once
per instance and across a pipeline's trial and ordinary solves.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Profiling the cutout pre-pass on real round-part jobs put ~97% of its time in
the frame-wall NestLayoutCheck.Clears inside CutoutCirclePacker.Fill. Ear-clipped
round frames make every perimeter/insert triangle pair overlap, so a clear pair
runs hole subtraction for every pair. The same question repeats for every frame
angle and repeated frame instance, because Automatic inserts get identical
frame-local poses.
- CutoutMemo, one per Prepare, replays geometry reads, circle items and Clears
answers. Keys hold geometry by reference, pose bit patterns, argument order
and spacing. It is threaded through CutoutCirclePacker.Fill and the router's
round-only path.
- TriangulatedRegion.SubtractAllHoles measures each piece's bounds once, skips
holes and hole triangles that no piece reaches, and ping-pongs the remainder
between scratch buffers instead of copying it into pooled ones. Clip
arithmetic and order are unchanged.
Bundles are byte-identical on 14 real and 10 synthetic ring jobs. Pre-pass time
over the real set drops from 99.6 s to 10.1 s (N0414-02 35.8 s -> 0.6 s).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The cutout router uses the circle packer alone for a round hole whose
inserts are all round. Lattice and NFP never placed more there, and when
demand exceeded what fit they spent 20+ minutes on one job.
- The cutout pre-pass skips a hole whose area is smaller than an insert's
outline, so bolt holes no longer run the searches.
- Circles re-packs its last sheet, and its last two sheets together, onto
each single stock and keeps the result when the whole job gets cheaper.
On 14 real round-part jobs costs are unchanged and pipeline time drops from
262 s to 144 s for Circles and 355 s to 245 s for Default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dropping the parts that land on a clamp suits small parts, which fill the
gaps between clamps. Large parts often do better if the fill area stops
short of the clamps. The rows still fit, and no part is lost on a clamp.
When every clamp in the fill area lies on one edge, interactive Fill now
also fills the area with that edge moved just past the clamp keep-outs,
as a larger edge spacing would. It keeps whichever layout the strategy's
comparer ranks better, and a tie keeps the dropped-parts layout. Clamps
on more than one edge skip the comparison. The second fill reuses the
cached best-fit pairs. While it runs, a preview counts as the new best
only when it beats the first layout, so the preview never gets worse.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Interactive Fill on a plate with clamps used to split the plate into
clamp-free rectangles and fill each one separately. It showed no progress,
so Accept did nothing until the end, and Stop discarded the result. Packing
around the clamps also tends to give a worse layout than losing the few
parts that land on them.
FillItem and FillGroup now fill the area as if there were no clamps. They
then drop each part that enters a clamp keep-out or sits too close to an
existing part, using the same check as before. For a multi-part group, the
whole copy is dropped when any member fails. Progress previews are filtered
by the same check, so a layout accepted early is clamp-clear. A quantity
request that loses copies asks for that many more, up to two more times.
Pack and whole-plate Nest still pack only into the clamp-free areas.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Interactive Fill ran the best-fit pair phase first. The first pair
computation for a drawing can take about a minute, and until it finished
the progress dialog showed no layout, Accept stayed disabled and the
status text did not change.
The fill now packs the part boxes (RectBestFit) before the pair phase and
reports that layout, so Accept is available at once. The layout is only a
fallback: strategies still run in their usual order, and a completed fill
picks the same winner as before. While the pairs are computed, the detail
line reads "Computing best-fit pairs (may take a minute)...". Accept or
Stop now stops the wait. The computation keeps running in the background
and is cached for the next fill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Circles packs every part as its minimum enclosing circle at centers tangent
to two of the work-area walls, placed discs and clamp keep-outs, bottom-left
and left-bottom, with hexagonal and square lattice seeds. It bids only when
every part fills at least 0.8 of its enclosing circle and otherwise returns
everything unplaced at once. Default runs it as a third candidate.
Rectangles' sheet-by-sheet stock loop moves to NestingEngines/SheetByStock
(Rectangles output unchanged) and Default's candidate scoring and commit
forwarding become shared helpers. Circles also runs the whole job preferring
each offered stock and keeps the best result. Contract tests take shapes an
engine can override.
Synthetic round jobs, salvage-credited: Circles wins or ties all six with
valid layouts; Default cost falls about 4% versus Irregular alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>