Commit Graph
690 Commits
Author SHA1 Message Date
ajandClaude Fable 5.2 fcfb3e6c1b feat(auto-nest): offer each sheet size that finishes the job as its own layout
Irregular picks each sheet's stock on an estimate of what the leftovers
will cost, so a size that took every remaining part could lose the pick
to a plan that ended up dearer, and its trial sheet was thrown away.
Each pass now keeps those finished plans: one that beats the pass's own
plan replaces it, and the rest are reported as alternatives (at most six
a pass). No extra sheets are packed.

The progress window's layout families now include the sheet sizes, so a
one-sheet 60 x 120 layout is offered beside a one-sheet 48 x 144 best
instead of being dropped as a near copy.

With 48 x 96, 48 x 144 and 60 x 120 offered, the seven sample parts (130
copies) still take one 48 x 144 sheet and now end at 130.7" instead of
136.6"; the tutorial and synthetic nests are unchanged.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-15 22:50:50 -05:00
ajandClaude Fable 5.2 b96e0853b5 feat(auto-nest): offer the top layouts in the progress window with each sheet's free strip
The Auto Nest progress window lists up to three whole-job layouts as
cards, the engine's best first and then the best of each other family
(sheet count and free-strip direction). Every sheet shows the distance
from its parts to the right edge (vertical strips) or the top
(horizontal strips), dimensioned on the sheet. Any card can be used:
during the search it stops it, and a finished search with more than one
layout waits for the pick. The layout used is validated and bound like
the engine's own result.

Engines may report plans that lost to their best as
NestJobStage.PlanAlternative; Irregular, Default and the time-limited
solve do. Reporting never changes a layout.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-15 18:04:21 -05:00
ajandClaude Opus 5.5 bf734ea743 perf(engine): speed up Irregular's banded and strip pass without changing layouts
- Lattice band certification prepares each member's outline once instead of
  re-inflating both parts for every pair (about 40% of each pattern's cost).
- Strip packing builds each beam level's band searches ahead in parallel,
  each on its own drawing copy; prefetched patterns charge no work and bind
  no orientations until requested in strip order, so the work meter and
  results match building them in turn.
- FrontierPacker blocks seated parts in one parallel pass, not one per part.

Layouts and work counts are unchanged on the README, clamp-rail, 2x and
tutorial jobs and the synthetic nests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 14:34:19 -05:00
ajandClaude Opus 5.5 163c23e8bd feat(engine): place large parts first and keep small ones as filler in strips
A sheet that cannot take all the remaining parts now keeps whichever
places more part area: the ordinary fill or strips largest part first.
The ordinary fill spent skinny parts early because they cover the most
area per length, leaving awkward ones for a ragged last sheet.

Inside a strip, the strip's own part fills its column first and the
others fill around it; before, pairs of smaller parts (counted as twice
a part's area) took the strip and the large part lost it. Bands also try
largest part first as a third order.

At about twice the README sample quantities the second sheet ends at
99.9" instead of 106.2" on master (104.7" before this change), and the
help tutorial's parts at 33.6" instead of 34.9". Every other benchmark
job is unchanged or better; mixed jobs solve about two to three times
slower than master.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 14:33:38 -05:00
ajandClaude Opus 5.5 81e70af5b6 feat(engine): pack mixed jobs in full-height strips in Irregular
Irregular decodes the job once more in full-height strips along X when
like parts group and every part shares one priority. A sheet that can
take all the remaining parts is packed two ways and the better kept:

- Bands: each type of three or more copies as its Lattice pattern in the
  narrowest strip that holds all its copies, bands side by side, the
  held-back copies and one-offs filling the gaps.
- Strips: each strip holds the largest remaining part, as its band or a
  column one to three copies wide, every other part filling its gaps; a
  beam of the four densest partial sheets carries strip to strip.

Band patterns are filled one grid unit wider than the spacing so a stack
of rings passes the strict certification, members on a clamp go to the
gap fill, and a short band moves flush to the far edge when that keeps
it off the clamps. The plan replaces the result only by beating it.

On seven sample parts (130 copies, 60 x 120) the layout ends at 102.9"
instead of 107.7", and at 104.6" instead of 108.6" with the desktop's
edge spacing and bottom clamp rail; at about twice the quantities the
second sheet ends at 104.7" instead of 106.2". Every other benchmark job
is unchanged. Solves of these jobs take about twice as long.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 14:33:38 -05:00
ajandClaude Fable 5.2 163a9c83d9 test(best-fit): pin crescent pair spacing on material-only outlines
The crescent reported as a slide defect (pairs inside the part spacing)
was a measurement artifact: the probe counted the program's opening
rapid as outline, a 0.2 spur outside the disc on the converted part.
Measured on material alone every candidate keeps the spacing, so the
slide solver is unchanged. Adds the rounded, origin-outside crescent
with its hooked first contact and documents the oracle rule.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-15 14:25:44 -05:00
ajandClaude Opus 5.5 3e2e9c842a feat(drawing-library): export drawings as DXF, SVG or .nest
Export... saves the selected drawing's listed revision; Export Listed
Drawings writes every drawing on the page to a folder, numbering
names the batch already used and asking once before replacing files.
Files are written beside the target and moved into place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 14:08:03 -05:00
ajandClaude Fable 5.2 c55187909d feat(storage): pick the nest server from a named saved list
Storage Mode and Tools > Options now share a server picker: a Saved
dropdown of every server this PC has used, shown as "Name — URL", with a
Name box for a note on what each one is for and a Forget button.

storage.json keeps the list as `servers`; setting a server adds or
renames its entry, and an existing install lists its current server
unnamed on first load.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 10:06:55 -05:00
ajandClaude Opus 5.5 5ead16bffe feat(avalonia): drop Export Nest Report to match WinForms
WinForms removed the direct-save command in ecd0bba4; the system PDF
viewer that Nest Report opens already saves and prints the report.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 20:41:55 -05:00
aj aea5e9f617 Merge remote-tracking branch 'origin/master' into claude/avalonia-port-next-tasks-f1f6b6 2026-11-13 20:25:34 -05:00
aj d6a551fdea Merge branch 'worktree-agent-afafee97ace7d9df4' into claude/avalonia-port-next-tasks-f1f6b6 2026-11-13 20:22:37 -05:00
ajandClaude Opus 5.5 d0654d267c feat(avalonia): export plates, view in CAD and nest reports
File > Export Plate... and Export All Plates... write the shown plate (each
plate in turn, shown while its file is chosen; cancel or a failure stops
the rest) as DXF, the view's image, the placement list or SVG, chosen by
the picked file's extension, under the WinForms suggested names. The image
is the plate canvas drawn by its Skia painter at the screen's density, PNG
or JPEG. Plate > View in CAD writes <nest>-P<n>.dxf to the temp folder and
opens it in the system's CAD program. File > Nest Report... writes the PDF
to a private temp folder and opens it in the system's PDF viewer, which
saves and prints it (older viewed reports are removed); File > Export Nest
Report... saves it to a chosen file. Reports refuse while Auto Nest runs on
the nest and are written off the UI thread from a detached snapshot.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 19:28:39 -05:00
ajandClaude Opus 5.5 ad6ffa1fda feat(avalonia): undo and redo nest edits from the Edit menu
Edit > Undo/Redo name the next step and follow the active tab's history;
Ctrl+Z, Ctrl+Y and Ctrl+Shift+Z undo the nest unless a text box has focus.
A restore keeps the plate, zoom, pan and selection. Auto Nest's commit is
one undo step and blocks Undo on its nest while it runs. DEBUG builds warn
about edits made outside a change scope.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 19:27:07 -05:00
ajandClaude Fable 5.2 07f30c1236 fix(engine): settle best-fit pairs sideways so they close to the part spacing
The pair search slid part 2 in from offsets on a 0.25 step grid, so a pair
that locks in a corner (two interlocking channels) stopped up to a step short
of the tightest fit. Each resting position is now also slid sideways, both
ways, and the new resting positions join the candidates.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 18:25:25 -05:00
ajandClaude Fable 5.2 9b7082e92f fix(clone): keep Shift+click copies at the part spacing
The coarse bounding-box pass only stopped at obstacles whose box lay in
the push path, so a copy could drop past a neighbor beside the path and
end inside its spacing. A box push now also stops at an obstacle nearer
than the spacing to the side of the path.

A push ignores a part the copy starts on, so a settle could slide out of
that part and stop clear of it yet inside its spacing. SettlePlacement
now prefers a push order that keeps the part spacing, and a named order
that ends too close falls back to the other order.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 15:43:47 -05:00
ajandClaude Fable 5.2 b77b3b7a33 refactor(core): swap an immutable part palette instead of mutating Drawing statics
Drawing.PartColors (a public array aliasing the active scheme's), Drawing.UseGoldenAngleColors and a non-atomic colour counter were process-global display state. PartPalette now holds a copy of the colours and the golden-angle flag; PartColorPalette.Current/Use swap it as a whole, Drawing.GetPartColor/GetNextColor read it, and the counter increments atomically. Colours shown are unchanged.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:20:22 -05:00
ajandClaude Fable 5.2 e5d4337681 fix(core): report overlapping pairs through PartOverlapChecker
The console overlap check and the MCP check_overlaps tool counted
crossing points, so a part contained in or stacked on another reported
no overlap. Both now list pairs from PartOverlapChecker.FindOverlappingPairs,
which uses the Intersects verdict and skips cut-off parts.

Plate.HasOverlappingParts stays for now: two test files outside this
change still call it.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:10:26 -05:00
ajandClaude Opus 5.5 e6d438629f feat(cutting): slice slugs the support grid can't hold level
On an enclosed machine a cutout slug that tips once cut free can stand up
above the sheet and catch the enclosure door when the pallet changes. The
head already keeps off cut cutouts, so this is about clearing the door, not
the head.

Cutting Settings > Cutouts > "Slice slugs the support grid can't hold
level" (CuttingParameters.SliceTippingSlugs, off by default, saved per
machine thickness and written only when on) makes Plan Cutting cut each
such slug along the bed's contact lines (grid rows and columns, slat center
lines) before the cutout, so no piece keeps a contact and the pieces drop
between the supports. Each slice stops a kerf short of the cutout, so the
pieces stay attached until the cutout's own kerf frees them together. A
slug the bed holds level, or one on no contact, is left whole; a cutout
holding another part or another of its part's cuts is never sliced.

Slices are break cuts emitted right after the drawing's own break cuts,
pierced on themselves and led straight back to their start. The
released-contour proof now leaves out straight break cuts lying wholly
inside one of the part's closed holes, since the grid cells they free are
scrap; break cuts in material still take part. The plan fingerprint only
changes when the setting is on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 17:04:27 -05:00
ajandClaude Opus 5.5 b9fc618a50 feat(library): filter the drawing library by thickness, size, holes, date and customer
Finding a part on the nest server meant scrolling 40k drawings: the library
could only match an exact thickness or customer and knew nothing about a
drawing's size or holes. The library browser gets a Filter dialog with
inclusive ranges, and the query API takes them.

The server never parses packages and stays off IO, so the server worker now
measures each package beside its nest jobs (bounding sides, net area, closed
cutouts inside the outline) and stores the summary keyed by package hash
(schema v19). Identical geometry is measured once, an unreadable package is
recorded once instead of retried forever, and size or hole limits match only
measured drawings. Thickness ranges compare in inches across units and keep
the library's rule that a drawing saved without a thickness suits any.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:47:51 -05:00
ajandClaude Opus 5.5 ecd0bba4eb refactor(file-menu): regroup the export and report commands
The File menu ran six output commands together with no separators, and
"Export" / "Export All" didn't say what they exported. Group them by what
they produce:

- Save Copy as .nest File... (was Export .nest...) moves next to Save As,
  since it writes the nest file rather than exporting a plate.
- Export Plate... / Export All Plates... (were Export / Export All) get their
  own group and the "..." their save dialogs call for.
- Nest Report... / Part Printouts... (were View ...) form a reports group.
- Storage Mode... gets its own separator above Exit.

Export Nest Report... is removed: the report viewer already has Save As
(available even without WebView2), so it was a second path to the same PDF.
Its guard and failure tests now drive the viewer path, and the atomic-write
test calls WriteNestReport directly. The Avalonia prototype's matching
command is renamed too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:41:12 -05:00
ajandClaude Opus 5.5 755f021092 feat(reporting): dimension part printouts like the Shape Library
A part printout showed the part but not its size on the drawing, so the
operator had to read the table to know which way was which. Each page now
draws the overall X extent below the part and the Y extent to its right,
as the Shape Library does: arrows, a boxed label and extension lines that
stop 6 pt short of the outline itself rather than its bounding box.

Each dimension line moves out far enough to keep its label 14 pt clear of
the part (a wide label centered on an 18 pt line nearly touched it), and
the part and its dimensions sit 28 pt inside the drawing border, double
the old padding.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:02:09 -05:00
ajandClaude Opus 5.5 72e16139ae feat(reporting): name the thickness on part printouts
The nest report already leads its thickness with the machine config's
Name / Gauge; the part printout's THICKNESS cell now does the same
(16 ga - 0.0598"), from the same lookup in the desktop.

Thickness names are typed into the machine config, so both writers now check
them against the bundled font's Latin-1 limit like other free text, instead
of failing partway through rendering.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 07:51:40 -05:00
ajandClaude Opus 5.5 2f3f105a5e feat(machine-config): name blank standard thicknesses on open
Thicknesses saved before the auto-fill kept a blank Name / Gauge until someone
edited their value, so their nest reports showed only the decimal. Opening
Machine Configuration now names every blank thickness that matches a standard
gauge or plate fraction and marks the form changed, so closing offers to save
them. Thicknesses matching none stay blank, and once saved a reopen finds
nothing to fill and does not ask again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 07:25:41 -05:00
ajandClaude Opus 5.5 35d77239b9 feat(machine-config): fill a blank thickness name from the standard gauges
Reports now take a thickness's name from the machine config, so a blank
Name / Gauge leaves the report with just the decimal. Machine Configuration
now fills a blank name from the standard steel gauge or plate fraction table
when the thickness value changes, and keeps following the value while the
name is still the old value's standard one; a typed name is never replaced.
A new thickness starts named for its default 0.25 (1/4").

Existing blank names are not filled on open, so viewing a machine never marks
it dirty; editing the value fills them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 07:25:41 -05:00
ajandClaude Opus 5.5 76e1acbc51 fix(reports): take the thickness name from the machine config
Each machine thickness already has a Name / Gauge field the shop fills in, so
the report now shows that name instead of guessing one from the standard
gauge table. It is matched the way the machine cutting defaults match the
nest's material, grade and thickness; a thickness without a name shows just
the decimal.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 07:25:40 -05:00
ajandClaude Opus 5.5 d2da7396ce feat(reports): move generated time to the footer and name standard thicknesses
The generated date sat among the summary's report details and printed a UTC
offset nobody on the shop floor reads. It now goes in every page's footer,
left of "Page X of Y", in the computer's own time zone without the offset.

The thickness now leads with its gauge or plate fraction ("16 ga - 0.0598 in")
when it matches one, as the thickness box lists it. Reporting references Core
only, so the desktop looks the name up in StandardThicknesses and passes it on
the snapshot.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 07:25:40 -05:00
ajandClaude Opus 5.5 696e0bdac6 feat(reporting): print one-page part printouts from the nest
Shops used CutSend to get a part printout (the part drawn to fit a Letter
page over a details table) because OpenNest had no way to make one. File >
View Part Printouts prints every part drawing of the nest, and the drawing
list's View Part Printout prints one; both open the report viewer to save
or print.

Cut length and pierce count walk the program as it is cut, so etch marks,
tab spans and display-only moves add neither, a tabbed cutout counts one
pierce per piece, and breakoff and common-line cuts count. The drawing list
item reaches the main window directly so nests made by BOM import get it
too. Rendering shares the nest report's lock, fonts and Latin-1 limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 07:10:56 -05:00
ajandClaude Opus 5.5 8f0bd24534 docs: note the Avalonia canvas draws from the shared plate geometry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 22:18:14 -05:00
ajandClaude Opus 5.5 476bed1a05 refactor(desktop): share machine, nest-default and shared-settings sources
The rules behind the WinForms MachineSettings and SharedSettings move into
OpenNest.Desktop as MachineSettingsSource and SharedSettingsSource, so the
Avalonia app reads machines, clamps and nest defaults the same way: in
Database mode the nest server's copy once it holds one (machines as a
whole, nest defaults and clamps as single documents), otherwise this PC's
files; the copy is re-read after two minutes (one while offline), and while
the server is unreachable the last copy read is used, read-only. Legacy
clamps still move onto the defaults' or the only machine once, asking at
most once per session, and cutting settings edited for a nest still save
onto the machine's thickness, or this PC (stamped for that job when the
machine cannot be saved).

Nothing in the shared code shows UI: it returns the warning texts, takes
the clamp-machine question as a delegate and reads the DefaultUnit and
CuttingParametersJson settings through IMachineUserSettings (with a
user-settings.json implementation under the WinForms names). Cut-off
defaults take CutOffSettings instead of a PlateView. MachineSettings and
SharedSettings stay in the WinForms project as thin wrappers with the same
members, showing the same dialogs and reading Properties.Settings and
NestStorage as before, so their callers are unchanged.

Tests cover File vs Database mode precedence, the offline read-only copy
and its once-per-session warning, staleness and retry timing, uploads,
post settings, legacy clamp migration, the cutting-settings save and the
user-settings file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 22:18:14 -05:00
ajandClaude Opus 5.5 641e07b766 feat(avalonia): draw plates in the saved colour scheme
The Avalonia app applies the colour scheme saved as ActiveColorScheme in
the shared user-settings file when the main window opens, and recolours a
nest's drawings from it when opening the nest, as WinForms does.

The plate canvas draws the background, sheet, edge spacing, etch, part
outlines and selection from the active scheme through SkiaSchemePalette,
a cache of Skia colours rebuilt when the scheme's colours change, instead
of hard-coded colours. Part outlines follow the scheme's outline colour
or the fill darkened as WinForms darkens it. There is no Options screen
to change the scheme yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 21:23:48 -05:00
ajandClaude Opus 5.5 5a627e5cc3 Merge branch 'claude/shared-post-contours'
Master added head-raise markers, common-line shared cuts and remainders to
the CI Fiber's own contour extractor, which this branch replaced with Core's
shared PostContours. Those now live in the shared model: PostContour carries
Raised, IsCommonLine and RemainderWinding, and Classify gives remainders the
perimeter macro on their perimeter's side and shared cuts no kerf side.
ContourWinding uses PortableMath for trig, as master's Core guard requires.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:10:16 -05:00
ajandClaude Opus 5.5 fa6f664296 fix(posts): pick Cincinnati CL kerf side from the shared contour winding
The CL post wrote the configured default side (G41) on every contour,
so a contour wound against OpenNest's convention was compensated into
the part. It now takes each feature's side from Core's shared
PostContours winding rule, as the CI Fiber post does: the perimeter is
picked across the part's cut features and hole sub-program contours
are always holes. Correctly wound drawings post unchanged.

Remove the "Default kerf side" post setting; saved configs that still
carry it load as before. Expose PostContours.Flatten and Classify so a
post can classify one part's features itself.

Add CL tests for a square with a hole: the exact inline program, cuts
that match the shared contours on the sheet, G41/G42 keeping the part
out of the kerf inline and through part sub-programs, and identical
output from absolute and incremental part and hole programs. The
replay now records the compensation in force on each cut.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:52:10 -05:00
ajandClaude Opus 5.5 cd623ff1aa refactor(posts): share contour geometry between posts through Core
Move the CI Fiber post's contour extraction and winding into Core as
OpenNest.CNC.Posting.PostContours and ContourWinding, so every post can
take sheet- or part-frame contours with the perimeter and kerf side
already chosen instead of re-deriving them. CI Fiber now writes from
the shared model; its golden output is unchanged.

Scribe marks are never picked as the perimeter and get no kerf. A cut
that resumes after suppressed moves starts a new contour where they
end, so it is no longer cut as a chord across the gap.

Add tests for a square with a hole in sheet coordinates, identical
contours from absolute and incremental part/hole programs, rotation,
and the kerf side for both windings.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:36:44 -05:00
ajandClaude Opus 5.5 fa6781d8b1 fix(options): name clone push orders by axis, not direction
The labels said left and down, but every push follows the plate quadrant:
on quadrant 4 "Push left, then down" pushed left, then up.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 14:03:31 -05:00
ajandClaude Opus 5.5 cafb34b510 feat(clone): choose Shift+click push order and add box-only Ctrl+click
Shift+click in Clone Parts always kept whichever axis order landed the
copy nearest the origin, which can park it in a pocket the user didn't
want. Options > Clone push placement now picks Closest to origin (the old
behavior, still the default), Push left then down, or Push down then left.

Ctrl+click settles the copy on bounding boxes alone, so it stops square
to its neighbors' boxes instead of nesting into their shapes. Shift+click
keeps its box pass then geometry settle; both follow the chosen order.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 07:53:24 -05:00
ajandClaude Opus 5.5 6867ae2ee4 feat(arrange): let Fix Spacing clear overlaps on packed plates and tilt as a last resort
On a plate packed edge to edge, an overlap left by hand-placing extra
parts could not be fixed: straight push chains ran into the edge and
the relaxation gave up on pairs that share material, which have no
contact normal. The relaxation now pushes such a pair along its
shortest straight way out and lets the rest settle, which cleared a
0.92 sq in overlap on a 38-part plate with every part kept square.

When moves alone still cannot settle, the relaxation runs again as a
rigid one: an off-center push also turns a part, up to 3 degrees, if
its drawing is free to rotate. Moves stay first because a tilt turns
every part the push reaches.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 14:45:54 -05:00
ajandClaude Opus 5.5 821c97e8dc feat(arrange): add Fix Spacing to push apart only flagged parts
Expand Spacing opens up a whole selection; nests that are a hair short
of fitting need the opposite: move only the parts the overlap check
flags, by the shortfall, and leave everything else where it is.

Fix Spacing pushes one part of each flagged pair straight away from the
other and ripples the push into neighbors it crowds, so rows already
locked in at the spacing can make room. When a plate is packed edge to
edge and no straight push fits, a constraint relaxation shares each
shortfall between both parts along the closest-point normal. Every
result is confirmed by the overlap check before any part moves, and is
applied only when it has fewer findings and nothing new.

NativeContours gains a coarse-flattening overload, Translated, Nested
and a closest-points GapTo for the search.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 14:29:10 -05:00
ajandClaude Opus 5.5 9273a44258 feat(engine): squeeze the Rectangles sheet that finishes the job
Auto Nest left N26-2A5 (14 door stops, 14 lock plates on a clamped 26x26
sheet) 8.0 high, while the shop's hand layout holds all 28 under 7.5 and
leaves a half-inch-deeper drop. Every MaxRects fit rule packs into the
whole sheet, so with room to spare it spreads the parts out and never
looks for the shortest strip.

When a rule places all the remaining demand, Rectangles now repacks it
into shorter and narrower bins, every rule and mode per probe, and offers
the tightest complete layout per axis to the stock loop, which still
picks by cost and offcut. Fit is not monotonic in bin size (7.5 packs,
7.62 and 7.74 do not), so probes walk down through stack heights (sums of
spaced part sides from the bin edge or a reached clamp) instead of
bisecting. A placement budget skips sheets finishing ~2000+ parts.

Benchmark, Rectangles on 80 recent production nests with salvage credit:
11 cheaper, 0 worse, all valid, total time 14.7 s -> 13.2 s.

The zero-clamp hash is re-captured (the squeezed layout is narrower);
the far-clamp test now compares poses, since the clamp can reorder an
identical layout.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 11:10:06 -05:00
ajandClaude Opus 5.5 f4fb6e1f3d feat(reporting): show clamps and sheet rulers on the plate layout view
Operators reading a printed nest report could not see where the machine
clamps sit or which ones must be pulled before cutting, and had no way to
measure positions off the layout. Plate diagrams now draw active clamps as
hatched rectangles (labels keep clear of them) and removed rail clamps as
dashed, crossed-out rectangles over the parts, with a legend line only on
plates that have clamps. A horizontal ruler below and a vertical ruler left
of the drawing read the sheet's plate coordinates in job units; the
diagram is fitted in two passes so the ruler bands match their numbers,
and part labels never enter them. Rulers draw as their own content stream
so the diagram stream holds only the sheet and what is on it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 08:02:24 -05:00
aj 8e9946aa47 docs(engines): keep layouts the same across platforms with PortableMath 2026-11-09 19:24:25 -05:00
ajandClaude Opus 5.5 e58e8b85c4 feat(report): add sheet weight to the plates table
The shop needs each sheet's weight for handling, so the summary's plates
table gains a Sheet weight column: one full sheet from its area, the nest
thickness and the nest (or catalog) density. A drawing's own material is
not used, since it doesn't say what the stock is; with no density the
column is left out.

Plates with copies now put the total cut time (and total weight) on a
second line instead of after a comma, which wrapped mid-phrase.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:59:31 -05:00
ajandClaude Opus 5.5 735c076afb feat(fill): tile herringbone pairs at the part's hull angles
Fill paired a 9" angle bracket at 90/270 degrees (75 on a 48 x 96 plate)
while a hand-laid herringbone at 315/135 holds 84. Its pair touches only at
the legs' ends, so it ranked ~888th by pair box area, and pairs are tiled
at the pair's own hull angles, never the part's 45-degree edge.

The pairs phase now also builds herringbone pairs: the part turned so a
hull edge lies along a sheet axis, its 180-degree copy slid onto the row
the part makes along that axis, tiled and remnant-filled like best-fit
pairs. Fill now finds the 84.

The chevron in the learned-angle fixture became a herringbone whatever
angles were learned, so a cross replaces it; the learned-angle and Strip
mixed nests are re-pinned.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 23:39:11 -05:00
ajandClaude Opus 5.5 f62f73533e feat(fill): tile pair grids into narrow leftover strips
Fill tiled 8" gussets on a 16.85 x 60 strip as seven pairs in a 10.35"
column (14) and left a strip too narrow for a gusset square on. Sliding
each pair along its hypotenuse so six span the height narrows the column
to 8.75" and leaves a strip that holds eight more turned 45 degrees (20),
as laid out by hand.

- The pair remnant filler tries strips down to the part's narrowest hull
  width and tiles single best-fit pairs as a grid there, taking the grid
  only when it places more than the rows of pairs.
- After the pair filler's early exit it also tries skipped candidates
  whose grid plus an optimistic leftover-strip estimate could still win,
  keeping one only when it places more parts.
- The optimistic remnant bound counts parts by true area, not bounding
  box, so interlocking parts no longer prune winning candidates.

The mixed Fill nest pin now places 34 instead of 33; the mixed Strip nest
keeps 35 with its L-shapes laid out differently. Both pass the layout check.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 22:24:49 -05:00
ajandClaude Opus 5.5 5adcddc748 feat(fill): refill the outer row's end to fit one more part
After the fill strategies, the winning layout's outermost row on each side
is pushed into the edge slack, slid toward one end, and copies of its end
part are slid in from the freed end. Lifting a staggered hexagon row straight
over the one below opens a notch where one more nests: a 7" hex cover on a
60 x 120 sheet now fills 181 instead of 180. The policy's comparer must
prefer the result and the requested quantity caps it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 21:46:03 -05:00
ajandClaude Opus 5.5 74937b7952 feat(cutting): start the owner's outline on its common line
The part cut first no longer makes a separate uncompensated centerline
cut with its own lead-in and lead-out, then re-pierces for its
remainder. It cuts its outside compensated, which puts its shared edge
on the kerf centerline, starting on the common line: a straight lead-in
from the scrap along the shared edge, then the line and on round its
perimeter with no lead-out. A member with spans already cut stops in
that kerf and cuts its last stretch from it, ending beside the part it
is cut before. Partners still cut only their remainders.

Replay's tabbed-ring accounting now accepts pieces that tile each span
exactly once, and the pre-post review counts a span as cut by a
member's compensated edge (or an older centerline cut).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 16:57:35 -05:00
ajandClaude Opus 5.5 bff11dbc3c feat(cutting): cut Z and L common lines once as one shared path
Straight spans of one pair that meet at a corner chain into one shared
path (CommonLineGeometry.Paths). Plan Cutting cuts it as one open
centerline cut through its corners, pierced and left in scrap along its
end legs; each member's spans run on to its own vertex at a corner, so
the path is one tab run. Join Common Line slides along the main edge so
the step of a Z or L also lands one kerf apart, and the plate draws the
path through its corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:15:29 -05:00
ajandClaude Opus 5.5 9b643aaec9 feat(engine): refill the pair grid's leftover strip with rows of pairs
The pair filler topped its grid off with single parts at 0 or 90 degrees,
so a narrow strip beside the grid held half of what it could: on a 60x120
sheet of N26-29X parts the plate fill gave 132, while deleting the last
column and filling the strip gave 136. The strip is now also laid out the
way the Row strategy lays one, rows of best-fit pairs turned so whole pairs
span it, and that layout replaces the singles when it places more.

Each strip size is laid out once per fill and skipped when the singles
already fill it by area. On the benchmark nest the plate fill now reaches
136 with the hand-made layout's rotations, about 17% slower (156 s vs
133 s with best fits cached). The pinned L-shape fills gain a part (52 to
53). The auto-nest problem-nest corpus keeps its baseline.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 19:15:36 -05:00
ajandClaude Opus 5.5 a9fc9f0afb feat(ui): duplicate a plate by Ctrl+dragging it or from its right-click menu
Copying a layout meant recreating the plate and copying its parts by hand.
Ctrl+drag a row in the Plates list drops a copy at that slot; the row's
right-click menu has Duplicate Plate, which inserts the copy after it.

Plate.CopyLayout copies the sheet (size, outline, spacing, quadrant, grain,
clamps, support bed), the parts with their programs and lead-in state,
common-line groups and cut-off definitions, regenerated in their places in
the sequence, as a save and reload would. The copy is one sheet with no
stock item codes, since those name particular physical sheets. The desktop
gives it its own cutting parameters and records it as one undo step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 17:07:52 -05:00
ajandClaude Opus 5.5 e6e2e5e0ad test(corpus): guard Auto Nest problems in the problem-nest corpus
The corpus is meant to hold every nest that ever caused a problem, tagged with
what it guards, but it could only plan cutting paths. Nests tagged
`checks: auto-nest` now run the Default engine on their demand and fail when the
layout is invalid, leaves parts unplaced, or uses more sheets than their
`auto-nest: N sheets` line; planner runs skip them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 15:17:57 -05:00
ajandClaude Opus 5.5 863ce4afde feat(engine): drop a sheet by packing edge parts first and turning the key part by its contacts
The Irregular engine grows each sheet from one side, so parts that fit only
when the outer ones hug opposite edges never met: ten one-off brackets
(four tapered 112-inch bars, four gussets, two small plates) stacked three bars
on one sheet and took three 60 x 120 sheets where two hold them.

After the search, a sheet-reduction pass splits a complete single-stock plan
over one sheet fewer and packs each sheet edge first: large parts to the
corners (flush, most outline on the edges, thinnest across the sheet), small
parts into the gaps last, and one key part into the pocket between. Clamped
sides move in past the keep-outs so edge parts line up on one straight edge.
When no sampled orientation fits the key, ContactFit turns it by its contacts
(each overlap a linear constraint on dx, dy and rotation) instead of sampling
more angles; the exact no-fit free region then confirms the angle, so spacing
and validation are unchanged. That job now nests on two sheets, the middle bar
at 4.4 degrees; the repository benchmark jobs are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 15:17:56 -05:00