Part.Rotation is cumulative, so rebinding canonical parts with
CreateAtOrigin(original, p.Rotation) double-counted the drawing's own
rotation, and FromCanonical rotated each part about its Location, which
moved it off its slot and out of the work area. Add
CanonicalFrame.RebindToOriginal (rotation = part - original program
rotation, footprint aligned to the canonical part) and use it in the
three places that duplicated the old logic.
The MBR only fixes the frame modulo 90 degrees and nest results are not
90-degree symmetric (an L gave 56/43/42/42 parts by orientation).
CanonicalAngle.Compute now picks one of the four orientations from the
centroid offset; symmetric shapes keep the MBR orientation.
Fixes the three NestInvarianceTests.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
Replace name-based quantity deduction with reference-based drawing
identity in the engine paths the whole-job runner reaches
(NestEngineBase fill/pack, StripNestEngine deduction, RemnantFiller
ledger, IterativeShrinkFiller leftovers). Add instance-scoped
PlateNesterFactory that resolves built-in strategies without touching
the global NestEngineRegistry. Add identity and engine-selection tests.
44 net8.0 tests pass in Debug and Release; no new warnings.
- Try all valid best fit pairs instead of only the first when qty=2,
picking the best via IsBetterFill comparer (fixes suboptimal plate
selection during auto-nesting)
- Pre-compute best fits across all plate sizes once via
BestFitCache.ComputeForSizes instead of per-size GPU evaluation
- Early exit plate optimizer when all items fit (salvage < 100%)
- Trim slide offset sweep range to 50% overlap to reduce candidates
- Use actual geometry (ray-arc/ray-circle intersection) instead of
tessellated polygons for slide distance computation — eliminates
the massive line count from circle/arc tessellation
- Add RayArcDistance and RayCircleDistance to SpatialQuery
- Add PartGeometry.GetOffsetPerimeterEntities for non-tessellated
perimeter extraction
- Disable GPU slide computer (slower than CPU currently)
- Remove dead SelectBestFitPair virtual method and overrides
Reduces best fit computation from 7+ minutes to ~4 seconds for a
73x25" part with 30+ holes on a 48x96 plate.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Strategies now promote results to IsOverallBest when they beat the
pipeline best, so the UI updates immediately on improvement rather
than waiting for each phase to complete
- PlateView only updates the main view on overall-best results, fixing
intermediate angle-sweep layouts leaking to the plate display
- Skip Row/Column strategies for rectangle parts (redundant with Linear)
- Intercept Escape key at MainForm level via ProcessCmdKey so it always
reaches the active PlateView regardless of focus state
- Restore keyboard focus to PlateView after fill progress form closes
- Remnant engines use SelectBestFitPair for orientation-aware pair
selection; DefaultNestEngine tries both landscape and portrait pairs
- RemnantFiller preserves more parts during topmost-part removal
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Change Nest() to decide fill vs pack based on total area coverage
instead of qty != 1. Items covering < 10% of the plate are packed,
so large parts get prime position and small low-qty parts fill gaps.
Qty=2 items are placed as interlocking best-fit pairs in remnant
spaces after the main pack phase, rather than as separate rectangles.
- Add ShouldFill() capacity-based heuristic
- Split pack phase: regular items pack first, then pairs
- Add PlaceBestFitPairs() for Phase 3 remnant pair placement
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace RotationAnalysis.FindBestRotation with PartClassifier.Classify in
RunPipeline, propagate ClassificationResult through BuildAngles signatures and
FillContext.PartType, and rewrite AngleCandidateBuilder to dispatch on part type
(Circle=1 angle, Rectangle=2, Irregular=full sweep).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Part.Intersects: filter intersection points at a vertex of either
shape (was both), so edge-touching parts are not flagged as overlapping
- NestEngineBase.HasOverlaps: use epsilon-based bounding box pre-filter
consistent with FillExtents and Plate.HasOverlappingParts
- PartGeometry.GetOffsetPartLines: remove extra chordTolerance added to
spacing offset — was causing 0.002" gap beyond the intended part spacing
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Make quantity trimming direction-aware: DefaultNestEngine uses TrimAxis
(virtual property on NestEngineBase) so HorizontalRemnantEngine removes
topmost parts instead of rightmost. Rename ShrinkAxis.Height → Length
for consistency with Width/Length naming used throughout the codebase.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace stored property setters (BestPartCount, BestDensity, NestedWidth,
NestedLength, NestedArea) with computed properties that derive values from
BestParts, with a lazy cache invalidated on setter. Add internal
ProgressReport struct to replace the 7-parameter ReportProgress signature.
Update all 13 callsites and AccumulatingProgress. Delete FormatPhaseName
in favor of NestPhase.ShortName() extension.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add virtual comparer, direction, and angle-building hooks to NestEngineBase
so subclasses can override scoring and direction policy. Rewire IsBetterFill
to delegate to the comparer instead of calling FillScore directly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add Compactor.Settle and AutoNester.Optimize post-passes to
NestEngineBase.Nest, StripNestEngine, and PlateView.FillWithProgress
so all fill paths benefit from geometry-aware compaction.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move fill algorithms to OpenNest.Engine.Fill namespace:
FillLinear, FillExtents, PairFiller, ShrinkFiller, Compactor,
RemnantFiller, RemnantFinder, FillScore, Pattern, PatternTiler,
PartBoundary, RotationAnalysis, AngleCandidateBuilder, and
AccumulatingProgress.
Move strategy layer to OpenNest.Engine.Strategies namespace:
IFillStrategy, FillContext, FillStrategyRegistry, FillHelpers,
and all built-in strategy implementations.
Add using directives to all consuming files across Engine, UI,
MCP, and Tests projects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The auto-nest code paths (MainForm, MCP, Console) now call
engine.Nest(items, progress, token) instead of manually orchestrating
sequential fill+pack. The default implementation in NestEngineBase
does sequential FillExact+PackArea. StripNestEngine overrides with
its strip strategy. This makes the engine dropdown actually work.
Also consolidates ComputeRemainderWithin into NestEngineBase,
removing duplicates from MainForm and StripNestEngine.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ajandClaude Sonnet 5