A straight lead-in at a convex outside-perimeter corner now runs along the
extension of the edge cut first, so the torch enters on that line and keeps
cutting it. The result no longer depends on which of the corner's two edges
auto-assign or the manual cursor picked, which made placement flip between
straight and 90 degrees. The approach angle is ignored at such corners.
The straight lead falls back to the first-cut edge normal when its pierce
would be closer than PierceClearance to the contour (very flat or tessellated
corners). Reflex perimeter corners bisect the notch. Line lead-outs run on
straight past a convex corner along the last-cut edge, except on tabbed
perimeters. Program generation and the Place Lead-in preview share
ResolveLeadIn/ResolveLeadOut.
b0997f6 moved every cut-off after the parts. Plate.Parts order is the
cut sequence, and the user sets each cut-off's place in it (Set
Sequence), so the post must follow it rather than reorder. Cut-offs
still post as uncompensated open lines with no lead-in.
The machine owner confirmed M50 swaps pallets (the sample's M50 before
M30 moves the cut sheet out for unloading). Only the single-program
between-sheet sequence remains unconfirmed.
Multi-sheet nests previously went into one program with a single header
size and one M50 at the end, so sheet 2 would cut into sheet 1's
skeleton. New Sheets settings:
- One program per sheet (default on): JOB.cnc -> JOB-1.cnc, JOB-2.cnc,
each a full program with its own size and pallet change (CL-series
batch rule, EM-423 7.4). Single-sheet nests keep the chosen name.
- Off: one program, with /L "L0" + pallet change between sheets;
mixed sheet sizes are rejected.
- Pallet change code (default M50, unconfirmed for multi-sheet CI Fiber
runs; documented as a release blocker).
All sheets are validated and rendered before any file is written.
IMultiFilePostProcessor lets the desktop app confirm overwrites of every
target file and list what was saved, and the console print each file.
Replace the generic PropertyGrid for configs that opt in via
PostSettingAttribute: a section list (Machine, Material, Program output,
Macros) with labelled fields, help text, numeric ranges and an editable
material-code table. Edits apply only when OK validates every field.
Unannotated configs (Cincinnati CL, GravographIS) keep the PropertyGrid.
Posting a nest with a sheet cut-off threw because the CI Fiber writer
treated every contour as a compensated part contour and requires a
linear lead-in after G41/G42 (TF5200 13.2.4.1). Cut-offs are open
centreline cuts with no lead-in and no inside/outside, so they now post
without G41/G42 and run after every part on the sheet so the sheet is
not severed before the parts are cut (matching the CL post).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After 1b, triangulating both polygons on every pair was the largest
remaining overlap cost (27% of main-thread samples on the corpus job).
PartOverlapChecker now triangulates each part at most once per check,
lazily after the bounding-box gate, and passes the triangles to a new
internal Collision.HasOverlap overload that runs the unchanged
OverlapRegions body. Triangles are only read by clipping and hole
subtraction, so reuse gives identical verdicts.
Verification:
- 49,000 seeded decisions with reused triangles match LegacyCollision;
triangles stay bit-identical to a fresh triangulation afterwards.
- Debug PolygonTriangulations: 246 -> 40 and 64 -> 36 per grid check;
sharing triangles per Program instead fails 23 tests.
- Corpus job (169 parts, --engines Default --parallel 1): median
13,398 -> 12,702 ms over 4+4 alternating runs vs 1b, identical
outcomes; serialized layout byte-identical to the base.
Also records the Follow-up B' (Slices 1a, 1b, 2a) measurements in
docs/performance/fill-performance.md.
Both HasOverlappingParts loops rebuilt each part's polygon from its
Program on every pair. PartOverlapChecker prepares each distinct Program
(reference identity) once and each part's world polygon once per call,
then uses the overlap-only Collision.HasOverlap. Loop order, bounding-box
prefilter, early exit and returned indices are unchanged; Part.Intersects
shares the material/polygon recipe and still returns crossing points.
Verification:
- Frozen LegacyPartOverlap differential (original Intersects and both
loops): verdicts, indices and world polygons bit-identical across fill
grids, patterns, touching/epsilon gaps, scribe/rapid/empty programs.
- Debug OverlapPolygonPreparations: 246 -> 1 and 64 -> 2 per check.
- Corpus job (169 parts, --engines Default --parallel 1, with 1a):
median 18,885 -> 13,464 ms over 4+4 alternating runs, identical
outcomes; serialized layout byte-identical to the base.
FillLinear re-prepared offset perimeter geometry (ConvertProgram ->
ShapeProfile -> OffsetOutward) for every part it measured, although
tiled copies share one Program and differ only by Location. A CPU
profile of a 169-part Default job put 62% of wall time there.
Prepare each distinct Program (reference identity) once per public
Fill/FillRow call in local frame, then clone and translate for each
location. The cache is created per call and passed down privately
because FillHelpers.FillPattern calls Fill concurrently on one
instance. PartGeometry gains a local-frame Program overload that the
Part overload now delegates to.
Evaluation order, lazy preparation, fallbacks and tiling are
unchanged. Differential tests against a frozen copy of the previous
FillLinear check bitwise equality, including concurrent calls; Debug
work tests pin preparation counts. With the thread pool capped at one
worker, before/after whole-job layouts are byte-identical. The
Default corpus job median drops from 40,715 to 18,810 ms.
CincinnatiSheetWriter.WriteHoleSubprogramCall emitted
`M98 P<num> X<x> Y<y>`, but per manual §3.98 ("M98 SUB-PROGRAM CALL
WITH NO ARGUMENTS") M98 takes only P and L — the X/Y had no defined
meaning to the control. The intent was to position the sub-program at
the hole center, which is what G52 is for per §1.52 ("local work
coordinate system") and which explicitly does not move the nozzle.
Emit the documented G52 bracket instead:
G52 X<hole.x> Y<hole.y>
M98 P<holeSubNum>
G52 X0 Y0
The hole sub-program is authored in hole-local coordinates, so its
first rapid (the lead-in to the pierce point) resolves to the absolute
pierce under the G52 shift and moves the tool directly there from the
previous feature's end — no phantom rapid to the hole center.
Also add docs/cincinnati-post-output.md as the reference for the full
post output format, with every emitted G/M code cross-referenced to
the Cincinnati programming manual. Un-ignore docs/ (docs/superpowers/
stays ignored) and track the PDF manual alongside the reference.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove implemented plan/spec docs from docs/superpowers/ (recoverable
from git history). Add .superpowers/ and launchSettings.json to gitignore.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three tasks: add TrimToCount with tests, replace shrink loop, replace
Take(N) in DefaultNestEngine.Fill.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Clarify sort direction (ascending, keep nearest to origin), document
parameter changes, MeasureDimension behavior, and behavioral trade-off.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
aj
