GetOffsetPerimeterEntities/GetOffsetPartEntities feed directional-distance
loops (FillLinear, Compactor, RotationSlideStrategy) that handle arcs
natively. Switching them to Clipper line output (plan option B) made
OpenNest.Tests run 48s -> 8m19s, Fill tests ~3x slower, and broke 20
exact-fit tests through tessellation and conservative padding, so they keep
the per-entity offset (option A), hardened:
- Arc, Circle and Line offsets are now side-symmetric. Right on a CCW arc
shrank instead of growing, Right on a CW circle grew, and Right on a line
offset to the left and reversed it. Only Left was used on hot paths, so
this was latent (SimplifierViewer drew both tolerance bands on one side).
- Shape.OffsetEntity closes every gap between consecutive offset pieces:
convex non-tangent line/arc corners get a round join about the original
corner, lines across a collapsed fillet are mitered, and any other gap
(concave arc corner, collapsed entity) is bridged with a line. Before,
only line-line corners were joined, so a vertex could slip through.
- Zero-area spikes are left in place and documented: they lie inside the
offset envelope, which is harmless for directional distance.
- OffsetOutward/OffsetInward become internal; PartGeometry is their only
caller.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
ShapeProfile.NormalizeEntities called Shape.Reverse() which flipped arc
directions on the original entity objects shared with the CAD view. Switching
to the Program tab and back would leave arcs reversed. Clone entities before
normalizing so the originals stay untouched.
Adds abstract Entity.Clone() with implementations on Line, Arc, Circle,
Polygon, and Shape (deep-clones children). Also adds CloneAll() extension
and replaces manual duplication in PartGeometry.CopyEntitiesAtLocation and
ProgramEditorControl.CloneEntity.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Circle.ToPoints() always generated CCW points regardless of the Rotation
property, so reversing a circle contour in the CAD converter had no effect.
Now negates the step angle when Rotation is CW, matching Arc.ToPoints behavior.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
"Length" is more natural than "height" for flat plate materials.
Renames the field on OpenNest.Geometry.Size, Box.Height property,
and all references across 38 files.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The push algorithm's copy distance formula (bboxDim - slideDistance)
produced distances smaller than the part width when inflated boundary
arc vertices interacted spuriously, causing ~0.05 unit overlaps between
all adjacent grid parts.
Two fixes applied:
- Clamp ComputeCopyDistance to bboxDim + PartSpacing minimum
- Use circumscribed polygons (R/cos(halfStep)) for PartBoundary arc
discretization so chord segments never cut inside the true arc,
eliminating the ChordTolerance offset workaround
Also parallelized three sequential fill loops using Parallel.ForEach:
- FindBestFill angle sweep (up to 38 angles x 2 directions)
- FillPattern angle sweep for group/pair fills
- FillRemainingStrip rotation loop
Added diagnostic logging to HasOverlaps, FindCopyDistance, and
FillRecursive for debugging fill issues.
Test result: 45 parts @ 79.6% -> 47 parts @ 83.1%, zero overlaps.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SegmentsForTolerance(double) to Arc and Circle that calculates the
minimum segments needed to keep sagitta within the given tolerance.
Add Shape.ToPolygonWithTolerance() that uses it per arc/circle.
Push distance now uses 0.08" chord tolerance instead of a fixed segment
count, giving appropriate resolution for each arc based on its radius.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move all projects from Source/ to repository root for simpler navigation.
- Remove External/ dependency DLLs (will use NuGet packages)
- Remove Installer/ NSIS script
- Replace PartCollection/PlateCollection with ObservableList
- Add packages.config for NuGet dependencies
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
ajandClaude Opus 5.5