HorizontalLine and VerticalLine had identical constructors, Dispose and
resize handling. They now derive from SeparatorLine and only say which
way the line runs. No behavior change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate > Set as Default and Nest > Edit's Defaults tab only changed the
open nest, so new nests never picked up the values. Set as Default now
also saves the new-nest defaults, and the Defaults tab gains an opt-in
"Use these defaults for new nests" check.
Machine thicknesses can now set part and edge spacing. A nest takes them
when its material, grade, thickness or machine changes and when a release
creates it; BOM import seeds its groups from them. Spacing edited in the
same dialog stays, and only an untouched trailing sheet follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pressing a dimension's value text now grabs it like its line does. The
label keeps its offset under the pointer, so a radius or diameter value,
which sits past its leader's end, no longer jumps when grabbed. Hit boxes
are measured the way painting draws them, at the control's DPI.
Holes and radii need sizes on the drawing as well as the overall extents. Select
circles or arcs, right-click and choose Add Radius Dimension or Add Diameter
Dimension. The value is measured live from the curve, found by its entity ID, so
it follows edits; only the leader angle and label offset are saved. A radius on
an arc stays on its sweep, and labels are kept clear of the curve and center.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shops need a part's overall size on the drawing while converting it. Width and
height are measured live from the geometry that will be cut, so they follow
filters, exclusions, simplifying, breakoffs and tabbed cutouts instead of going
stale. Only the placement is saved; dimensions never touch the program.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Limits are plain coordinates, so moving a cut-off left the lines trimmed
to it stopping where it used to be. A drag now takes along perpendicular
lines with a limit or gap edge on its center, extending or trimming them
to keep meeting it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Customers and design tools hand over SVGs, and getting them in meant a
trip through another CAD tool. CadImporter now reads them like any other
drawing, and plates, programs and converter entities can be written out.
An SVG's numbers are not drawing units, so import converts to the nest's
units and never guesses: only an absolute width or height counts as a
stated size, since px means 1/96 in to browsers but 1/72 in to
Illustrator. Without one the desktop asks, showing the size each choice
gives, and headless callers must pass the scale or the import fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The repo mixed variants such as center/centre and color/colour, so a
name could be spelled either way and searches missed half the hits.
Standardize on the US spelling, matching .NET's own APIs (Color, Center).
Wire values owned by other systems keep their spelling: the material
ledger's "Cancelled" hold status and GitHub's "cancelled" job status.
No behavior change beyond the spelling of a few status messages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edits in the Cutting Parameters dialog only reached user settings, while a
plate's stored parameters took priority, so a change was lost on any
planned plate unless Apply succeeded. User settings now win; a plate's own
are the fallback when none are saved or readable.
WinForms tests saved to the real user-settings.json, and with user settings
winning a test's lead-ins would feed real planning, so they now use a temp
file and skip the legacy settings carry-over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Trim refused the piece between two crossing cut-offs because a cut-off had
one start and one end, so a line could not be stopped short around a pocket
of parts without deleting it and drawing two. A cut-off now carries Gaps,
stretches between its limits left uncut: segment generation excludes them
like parts, so the line splits into segments that each take their own place
in the cut sequence. Trimming a middle piece adds a gap from one crossing
centre to the other (merged with any it touches), Extend near a gap's edge
closes it, and Swap Through-Cut refuses a junction a gap touches rather
than guess which side of the gap should run through.
Every reader of the limits treats a gap as uncut, so nothing waits for,
warns about or credits a cut that never happens: segment spans stop at a
gap, the cutting dependencies skip a part inside one, the clamp check
ignores a clamp inside one, the cutting-state and overlap stamps go stale
when gaps change, and a gapped line is never full span for the expected
remnant or automatic cut-offs. Gaps persist as an optional gaps array;
older versions ignore it and would cut straight through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing library tests relied on DataGridView picking a current row by
itself when the page is populated. It only does that when the first row is
already laid out as displayed, which the hosted Windows runner does not
guarantee. Without a current row SelectedRecord() is null, Add/Edit return
silently, and the test fails later:
- run 41057280460: EditSettings_SavesCutFirstAsANewRevision_AndTheAddAppliesIt
"Timed out waiting for the reloaded page."
- run 40312036013: MismatchWarning_IsShownBeforeTheAdd_AndCancelLeavesTheNestAlone
expected 2 messages, got 0.
Make the first row current explicitly after each page load (and after the
edit reload that precedes an Add), and make Run() rethrow a faulted task so
a failed step reports its own error rather than a 15 s timeout.
The release panel was the only place that counted a set in kits;
everywhere else in the drawing library calls them sets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A manual cut-off ran the full sheet even when another cut-off crossed it,
leaving a Trim/Extend pass to clean up what Automatic Scrap Cutoffs does
on its own. New lines now run from their start edge, set by the cut
direction, and stop at the first crossing line. Tab switches to full
length for the lines that should run through, and the choice lasts until
the nest is closed.
Suggested-by: alexvyperus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Machine Configuration held one lead-in and lead-out per thickness and
applied it to every contour. Each thickness now has Outside Cuts and
Inside Cuts tabs; inside cuts follow the outside leads until "Same as
outside cuts" is cleared, and configurations without inside leads keep
applying one pair to both.
The lead type lists, per-type fields and preview from Cutting Settings
are now a reusable LeadsEditor control that both dialogs use. The
machine tabs hide what the configuration cannot hold: the arc sweep,
the clean-hole kerf (taken from the thickness) and Line + Line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Help menu's F1 shortcut took the key before the plate view, so F1
in Clone/Add Part opened help rather than setting the part in place as
it always has. Actions can now claim F1; Clone does, and MainForm lets
the key through to the plate view while it is active.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators could only drag or delete a cut-off, so changing which line runs
through a junction (e.g. letting a vertical split the sheet to keep a whole
remnant beyond it) meant deleting and re-adding lines. Trim/Extend edits the
existing start/end limits instead, so no file-format or planner change is
needed: trims stop on the crossing line's centre, extends run to the next
crossing or the sheet edge, and Swap Through-Cut (right-click a junction)
does both at once, trimming the through line's far side because only the
origin-side edge is certain. Edits undo as one step and re-place the changed
segments with PlateSequencing.PlaceCutOffs so a new separator is cut last.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Undo regenerates each restored plate's cut-offs, which removes the
cut-off parts first. A plate holding nothing but cut-offs became empty
for a moment, so the new-plate sentinel dropped a trailing plate while
the restore was still enumerating the plates, throwing "Collection was
modified". Regenerate inside a PlateManager batch so the sentinel only
settles once every plate is done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Issue #13 asked whether a Sheet Cut-Off can be rotated; Space already
toggles vertical/horizontal, but nothing said so. The tool now shows a
"Space: turn horizontal" tag by the pointer, spells out its keys in the
status bar, and F1 opens a new sheet-cutoff help topic while it is
active (actions can now supply a status hint and a help topic).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plan Cutting saved its settings only on a successful Apply, so a plate
that would not plan lost them. Each open then laid the machine's leads
back over the last parameters, and the cutting panel rebuilt parameters
from scratch, dropping kerf and the machine/material/thickness stamp.
Save the settings when the dialog is accepted, keep the panel's
unexposed fields, and only apply the machine's leads when the last
parameters were not already taken from that machine, material, grade
and thickness.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PlateFillService throws for a plate with a sheet outline, but the desktop
swallowed it: Fill (Ctrl+F) caught every exception and showed nothing, and
Fill Area's async void either completed silently or let it escape.
PlateFillService.Refusal(plate) names the reason, and every caller checks
it first: Fill and Fill Area put it in the status bar and add nothing,
Pattern Tile offers a new plate only, the MCP fill/pack tools return it as
an Error result, and the console exits 2 with it unless --autonest is given.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The plate view fills the outline, hatches obstacles and draws the usable
area; Edit Plate imports an outline from a CAD file or clears it, with
the size read-only while the sheet has one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Browsing nests in Database mode crashed with ObjectDisposedException on
DataGridView: selecting another nest drops the embedded version history,
and WinForms leaves its grid's keyboard-tooltip auto-pop timer running.
When the timer fired it hid the tooltip through the disposed grid.
GridStyle now hides that tooltip when a styled grid's window is destroyed,
which stops the timer for every grid in the app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
8dded7f1 draws cut-off ids white on a disc of the cut-off line's orange,
so the old assertion that no orange touches the id failed on the Windows
CI job. The test now checks what the disc is for: the disc is there, and
the id's white strokes survive on the cut's own pixels. Drawing the lines
after the labels fails it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every installed copy checked GitHub Releases on its own, so a shop's
workstations shared GitHub's 60-requests-per-hour unauthenticated limit
per public address and each downloaded the ~90 MB package over the
internet. Shops large enough to hit that already run the nest server.
The server now mirrors the Velopack feed at /updates/{stable|dev}: one
GitHub API request per 30-minute refresh, each package downloaded once
and checked against the feed's size and SHA-256 before it is served. A
channel is mirrored only while clients ask for it, so stable-only shops
never download development builds. Database-mode clients read the
server first and fall back to GitHub when it has no feed (old server,
mirror off, not mirrored yet), downloading each package from whichever
source listed it. A hand-set feed URL still takes precedence.
OPENNEST_UPDATES=off turns the mirror off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The plate-colored disc behind a cut-off id read as a notch in any part edge
the cut runs along. An orange-red disc with a white id reads as a tag on the
cut-off line instead, and still keeps the dashed line from striking it through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Highlighting an earlier version on the Versions tab left the plates,
drawings and plate preview on the current version, so there was no way
to see what a historical version looked like without opening it. The
embedded history now reports its selection and the browser downloads
that version (debounced, cached per history view) and shows it, labelled
as historical; selecting the current version returns to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel gains a Current plate only / All plates selector, shown when the
two scopes differ. Changing it takes the unapplied scrap cut-offs off,
cancels any running plan and replans. The toolbar button opens with the
scope last chosen there (default all plates); the Plate and Nest menu items
keep their fixed scopes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest leaves out ledger item codes already on other open server nests,
and save and post re-check a nest's codes before going on.
- Server: GET /api/nests/stock-item-codes?exclude= lists the codes on
non-deleted Draft, Quote and To Be Cut nests. Codes are stored in
nest_stock_codes (schema v14) at every archive write; the upgrade reads
each current archive once.
- Data: INestRepository.GetStockCodesInUseAsync, LedgerCodesInUse (5 s,
failures become an unknown answer), the pure LedgerCodeFilter for ledger
rows (reusable by release-time nesting) and LedgerCodeCheck for the
re-check.
- Desktop: the Auto Nest ledger summary counts "(N on other nests)" or says
other nests were not checked. Save, Save As and post open Ledger Stock
Changed when codes are taken: proceed after a per-attempt
acknowledgement, remove the codes (undoable), or cancel. A ledger that
cannot be read skips the check with a status note.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WinForms user settings lived in user.config under %LOCALAPPDATA%\OpenNest,
the Velopack install folder that setup clears on a reinstall, and the
default provider starts empty at each assembly version. Store them in
%APPDATA%\OpenNest\user-settings.json instead, carrying over any values
the old user.config still holds on first run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add a Support Bed tab beside Clamps that edits the grid or slats new
nests assigned the machine receive. A machine without a bed shows the
legacy support-grid.json values; the first edit stores them on the
machine in its units.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The status bar shows the running version, and the Help menu gains
Check for Updates (an immediate check sharing the background check's
lock) and About OpenNest. A copy that is not a Velopack installation
offers to open the GitHub Releases page instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drawing.Bends stay in the DXF's source frame while CadImporter moves the
program so its first pierce sits at the origin (Source.Offset). The plate
renderer added part.Location to raw bend points, so every bend and etch
mark was shifted by its drawing's pierce offset, visible on the drawing
library set preview and on plates alike. Remove Source.Offset before
rotating and placing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- archived library drawings: say they can't be edited or released; no
front end can restore a library drawing yet
- library filter hint names the Show all materials checkbox
- undo labels Support Bed and Automatic Scrap Cutoffs match their menus
- display-outline posting hints name both Plate > Plan Cutting... and
--plan-cutting, since the console prints them too
- MaterialLedger options are saved per Windows user, not per machine
Clamps are physical fixtures that differ between machines, but one global
clamps.json served every machine, so a plasma table and a fiber laser could
not have different rails.
- MachineConfig.Clamps holds each machine's rail in the machine's units,
edited on a new Clamps tab in Tools > Machine Configuration.
- New and BOM import give a nest the rail of the machine they assign;
Nest > Clamps loads and saves the nest's machine's clamps. Each nest keeps
its own copy, so machine edits never move existing nests' clamps.
- At startup, while no machine has clamps, the legacy clamps.json (or the
server's shared copy) is copied once into the default or only machine;
with several machines and no default the user picks one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shape Library, drawing library and drawing set preview each drew
parts their own way (hardcoded green fill, steel-blue fallback, black
outlines with gray etch). They now share a library style on ColorScheme
(background, fill, outline, etch and bend colors) that ignores drawing
colors, follows the active scheme (Dark gets a dark variant) and
round-trips through saved schemes, defaulting when absent. Nest part
colors are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Replace the name list with a ListView of 96px thumbnails drawn by
Program.GetImage at each shape's preview defaults (or its first
configuration), labelled with the name and configuration count. The
left pane opens three tiles wide instead of half the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nest drawings can require no parts, but the CAD Converter's quantity
spinner had a minimum of 1, so Edit Drawings in Converter threw
ArgumentOutOfRangeException as soon as such a drawing was selected.
Lowering the minimum to 0 lets the converter load it and hand the
drawing back with its quantity still 0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The nest's machine and its Nest Info fields were the last edits only the
fingerprint safety net could catch (and it misses most of them). Machine
is now one step, together with the support grid and cut-off settings the
machine brings. Nest Info is one step for what Undo can put back (units,
material, thickness, customer, notes and plate defaults); the name,
status, author and creation date stay as they are through Undo, so an
edit of only those records nothing.
The sheet strip only shows Auto Nest proposals; what it shows is
committed through Auto Nest, which is already recorded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drawing changes were unrecorded, so Undo skipped them or lumped them
into an anonymous "Change". Each is now one labelled step: Import
Drawings, Shape Library (menu and panel button), Drawing Library (what
the dialog added or re-quantified), Save to Drawing Library (the nest
keeps the drawing's new library link), Edit Drawings in the converter,
Drawing Properties, Delete Drawing and Clean Unused Drawings. Dropping a
drawing on a plate was already recorded as Add Part and is now tested.
The converter can change live programs while it loads, even when it is
cancelled; a cancel that did so now rolls the nest back to before the
converter opened instead of leaving those edits unrecorded.
Deleting a drawing threw when removing its parts emptied the trailing
plates, because the plate manager drops trailing empty plates while the
loop walked the live plate list; it walks a copy now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cutting edits were unrecorded, so Undo skipped them or folded them into
an anonymous "Change". Each is now one labelled step: Add Cut-Off, Move
Cut-Off (one step per drag), Automatic Cut-Offs, Auto Sequence (current
plate or all plates, only when the order changed), Set Sequence (per
click), Sequence by Path (the whole tool session; Backspace and Ctrl+Z
inside it still take back one line), Place Lead-In, Remove Lead-Ins (the
tool's menu, the plate and the nest commands), Cutting Parameters (an
edited lead-in panel when the tool closes), Plan Cutting and Clear
Lead-ins and Cut-offs.
Plan Cutting stages scrap cut-offs on the live plates before it plans,
so its scope opens with the staging and records only when the plan is
applied; closing without applying records nothing. Clearing applied work
is its own step and no longer warns that it cannot be undone.
Opening the lead-in tool used to give a plate without parameters the
defaults straight away; the plate now takes the tool's parameters with
its first lead-in, so opening and closing the tool changes nothing.
Undo no longer waits while the tool has a part picked: it ends the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate and clamp changes went unrecorded, so Undo skipped them or lumped
them into an anonymous "Change". Each is now one labelled step: Edit
Plate (only on OK), Rotate Plate, Resize Plate, Set Nest Default Plate,
Clamps and Support Grid (applying to the nest; saving machine defaults
stays outside the history), Remove Clamp / Put Clamp Back from the
plate's clamp menu, and Add/Move/Delete Clamp in Edit Clamps.
Edit Plate used to copy an empty plate's settings into the nest defaults
even when the dialog was cancelled; that now happens only on OK, so a
cancelled dialog changes nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Placement edits were only caught by the fingerprint safety net, so they
undid as an anonymous "Change" or folded into the next edit. Each now
records one labelled step: Fill (at the commit, so a stopped fill that
keeps nothing records nothing), Fill Area, Pattern Tile, Auto Nest (from
the kept proposal only; Make Nests tabs too), Clear Nest, Remove Empty
Plates and Center Parts. Clear Nest no longer warns that it cannot be
undone.
Pattern Tile onto a new plate created a plate beside the empty sentinel,
which the plate manager dropped at once, so the pattern landed on a
detached plate; it now fills the sentinel.
The undo tests share one harness that compares a text description of the
nest before an edit and after Undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Whole-nest snapshots make undo safe without a hand-written inverse per
operation: each recorded edit stores one NestSnapshot in the document's
history, and Undo/Redo read one back and swap it into the open window.
- Document.History is reset with the opened nest; Save and database
saves mark the save point instead of clearing it.
- EditNestForm.BeginChange opens a scope: nested scopes merge into the
outermost, Complete commits one entry, and leaving it incomplete rolls
a changed nest back. No-ops are detected by the scope's changed flag,
not by comparing bytes (copies are not byte-stable).
- RestoreNest shares the per-nest binding with the constructor and keeps
the Document, the nest's identity, the plate index, the viewport and
the selection. It ends the action, closes Cutting Inspection, side
panels and the remnant viewer, rebuilds the PlateManager, reapplies
the view's cut-off settings and recolours the drawings, because each
of those holds or derives from the old nest's objects.
- An edit no scope recorded (Phase 3 sites) is detected by a cheap
fingerprint and committed as its own "Change" entry before a scope,
Undo or Redo, so it is never silently discarded; DEBUG builds also
warn about it on idle.
- Edit > Undo/Redo name the next entry. Ctrl+Z/Ctrl+Y/Ctrl+Shift+Z go
to focused text editors first, then to an action's own step-back
(Sequence by Path), then to the nest. They wait for jobs, fills,
background saves and busy actions, but not for a plain selection.
- Recorded: delete, drag, arrow nudges (coalesced), rotate, align,
push, expand spacing, add part (drop and clone), cut, add and remove
plate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The members group resumed layout only after the outer table had already
sized it, so its docked grid kept the default 240x150 until the form was
resized. Inner containers now resume before the table lays them out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Zoomed out, small parts and short cut-off segments piled their ids on each
other. As the CAD converter numbers entities, an id now shows only once its
part is big enough on screen to hold it: a part must be as wide and tall as
the id's text, a cut-off segment as long as the id's disc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Typing customer, material, grade and thickness by hand let near-duplicate
spellings into the library, which then split drawings that should match.
The fields are now drop-downs of the values the library and the machine
material catalog already use, while still accepting new values; thicknesses
already used for the material are listed ahead of the standard gauges.
A library color could be set but never cleared back to the color scheme's,
so Automatic and Reset are added. The rotation start/end/step boxes gave no
sense of the range, so a dial shades it, ticks the angles the engines try
(via RotationPolicy) and lets either end be dragged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cut-off lines are painted after the parts, so the dashed line ran straight
through each segment's id, which sits on the cut. Cut-off segment ids are now
held back from the parts pass and drawn after the lines, over a disc of the
plate's fill color.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5