mirror of
https://github.com/ajisaacs/OpenNest.git
synced 2026-11-16 04:35:34 -05:00
Thicknesses saved before the auto-fill kept a blank Name / Gauge until someone edited their value, so their nest reports showed only the decimal. Opening Machine Configuration now names every blank thickness that matches a standard gauge or plate fraction and marks the form changed, so closing offers to save them. Thicknesses matching none stay blank, and once saved a reopen finds nothing to fill and does not ask again. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
100 lines
6.5 KiB
Markdown
100 lines
6.5 KiB
Markdown
# Machine cutting defaults
|
|
|
|
A nest's assigned machine (`Nest.Machine`, see [nest file format](nest-file-format.md))
|
|
supplies the lead-ins, lead-outs, kerf, lead-in angle rounding, tabs, pierce, cut-off settings
|
|
and spacing for the nest's material and thickness, from that machine's Tools > Machine Configuration entry (in
|
|
Database mode, the server's [shared machines](shared-settings.md) once it holds them).
|
|
`MachineCuttingDefaults` (OpenNest.Data) holds the mapping; the desktop applies it.
|
|
|
|
## Lookup
|
|
|
|
The machine's material must match the nest's material name, and its grade when the nest
|
|
has one (otherwise the first grade on file). The thickness matches within 0.001 in after
|
|
converting the nest's thickness to the machine's units, so a thickness rounded to three
|
|
decimals (PEP stores 3/16 as 0.188) finds the machine's 0.1875; the nearest one wins. With no match, or no machine on
|
|
file, nothing changes and the previous behavior applies. Lengths are converted from the
|
|
machine's units to the nest's.
|
|
|
|
A thickness's **Name / Gauge** ("16 ga") is display only: the tree shows it and nest reports
|
|
put it before the decimal. In Machine Configuration a blank name, or one still the standard
|
|
name of the old value, follows the thickness value to its standard steel gauge or plate
|
|
fraction (`StandardThicknesses`, matched to the displayed precision); a typed name is kept.
|
|
A new thickness starts with the name of its default value. Opening Machine Configuration
|
|
names every blank thickness that matches a standard one and, when it named any, offers to
|
|
save them on close; thicknesses matching none stay blank.
|
|
|
|
## Where the Cutting Parameters dialog saves
|
|
|
|
Every setting in Plan Cutting's Cutting Parameters dialog and the Place Lead-in panel is kept on
|
|
the nest's machine thickness: leads on the Outside Cuts and Inside Cuts tabs, lead-in angle
|
|
rounding, tabs and pierce on the Tabs & Pierce tab (`ThicknessConfig.Cutting`). So 0.25 in can
|
|
tab parts while 0.5 in tabs none, and in Database mode every workstation gets the same
|
|
settings. The dialog names what it edits above its fields ("Saved for Fiber 1 · Mild Steel A36
|
|
0.25 in") or why it edits this PC's settings instead (no machine, no material or thickness, or
|
|
a thickness the machine does not list).
|
|
|
|
Plan Cutting and Place Lead-in start from this PC's last settings (`CuttingParametersJson` in
|
|
user-settings.json), with the machine's leads and kerf laid over them, and its rounding, tabs and
|
|
pierce when the thickness sets them (a thickness whose Tabs & Pierce box is unchecked keeps this
|
|
PC's), and the machine, material, grade and thickness recorded on the parameters. A plate's own
|
|
parameters are used only when no user parameters are saved or readable, so an edit reaches nests
|
|
already planned.
|
|
|
|
The dialog saves when it is accepted and when a plan is applied, and Place Lead-in when its panel
|
|
closes after an edit. With a matching thickness the settings are written to the machine
|
|
(`MachineCuttingDefaults.WriteTo`, converted to the machine's units; inside cuts equal to the
|
|
outside ones keep following them, and kerf, cut-off, spacing and plate sizes are untouched), and
|
|
this PC's settings are left alone, so a thin job's tabs never become another job's. Matched, the
|
|
dialog offers only the leads a thickness can hold: no Line + Line, no arc sweep, no outside Clean
|
|
Hole. Without a matching thickness the settings are saved as this PC's.
|
|
|
|
When the machine cannot be saved (the nest server is offline, someone else changed the machine,
|
|
or the thickness was removed), the settings are saved as this PC's, recorded for that machine,
|
|
material, grade and thickness, and the user is told. While they are recorded for that job the
|
|
machine's settings are not laid over them, so the edit sticks on this PC; the next successful
|
|
save to the machine clears the record. Changing the settings, machine, material or thickness does
|
|
not rewrite the leads a plate was planned with: its programs and stored parameters stay until a
|
|
plan is applied.
|
|
|
|
Tools > Machine Configuration's thickness menu has Copy Tabs & Pierce To..., which copies one
|
|
thickness's Tabs & Pierce (or their absence) to the thicknesses picked, with Thinner and Thicker
|
|
shortcuts.
|
|
|
|
Each thickness holds a lead-in and lead-out for outside cuts (the Outside Cuts tab, external
|
|
contours) and, optionally, its own pair for inside cuts (the Inside Cuts tab, internal contours,
|
|
full circles included). Inside cuts use the outside pair until "Same as outside cuts" is cleared,
|
|
which starts them from a copy of it; configurations saved before the split have no inside pair
|
|
and keep applying one pair to both. Both tabs use the shared `LeadsEditor` control that Cutting
|
|
Settings uses, without the fields the configuration cannot hold (an arc's sweep; a clean hole's kerf,
|
|
which comes from the thickness). Types map as follows:
|
|
|
|
| Machine type | Lead-in |
|
|
|---|---|
|
|
| None | none |
|
|
| Line | line (length, angle) |
|
|
| Arc | arc (radius; the default 180-degree half-circle sweep) |
|
|
| Line + Arc | line-arc (length, radius, angle) |
|
|
| Clean Hole | clean hole (length, radius, the thickness's kerf), inside cuts only; an outside Clean Hole (older configurations) keeps the external lead-in |
|
|
| Line + Line | not offered; an older configuration's is not mapped (it has no second segment): the lead-in it would set is kept |
|
|
|
|
Lead-outs map None, Line (length, angle) and Arc (radius); any other type is none.
|
|
|
|
## Spacing
|
|
|
|
Each thickness can set a part spacing and an edge spacing (the Spacing tab), each optional:
|
|
one left unset stays at the nest defaults' value. The machine's spacing replaces the nest's
|
|
plate defaults when Nest > Edit or Nest Information changes the material, grade or thickness
|
|
(a spacing edited in the same dialog stays), when Nest > Machine changes the machine, and when a
|
|
drawing set release creates a nest. BOM import starts each group's row from it. File > New has
|
|
no material yet, so a new nest starts from the nest defaults; adding a library drawing to a nest
|
|
with no material or thickness gives it the record's (`LibraryDrawingInsert`), and with them this
|
|
spacing. Drawings from files carry no thickness, so they leave the nest blank. Plates are kept as they are, except
|
|
an untouched trailing empty sheet, which follows the plate defaults.
|
|
|
|
## Cut-offs
|
|
|
|
The plate view's part clearance, overtravel, minimum segment length and direction come from
|
|
the machine's cut-off settings when a nest opens, when Nest > Machine changes the machine and
|
|
after Nest > Edit saves. The head-locked overcut choice is kept. Existing cut-offs are not
|
|
regenerated at that moment; they follow the settings the next time they regenerate.
|