mirror of
https://github.com/ajisaacs/OpenNest.git
synced 2026-11-06 11:15:44 -05:00
ajandClaude Opus 5.5
bb21ffdf35
Machine Configuration held one lead-in and lead-out per thickness and applied it to every contour. Each thickness now has Outside Cuts and Inside Cuts tabs; inside cuts follow the outside leads until "Same as outside cuts" is cleared, and configurations without inside leads keep applying one pair to both. The lead type lists, per-type fields and preview from Cutting Settings are now a reusable LeadsEditor control that both dialogs use. The machine tabs hide what the configuration cannot hold: the arc sweep, the clean-hole kerf (taken from the thickness) and Line + Line. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
55 lines
3.3 KiB
Markdown
55 lines
3.3 KiB
Markdown
# Machine cutting defaults
|
|
|
|
A nest's assigned machine (`Nest.Machine`, see [nest file format](nest-file-format.md))
|
|
supplies the starting lead-ins, lead-outs, kerf and cut-off settings for the nest's
|
|
material and thickness, from that machine's Tools > Machine Configuration entry (in
|
|
Database mode, the server's [shared machines](shared-settings.md) once it holds them).
|
|
`MachineCuttingDefaults` (OpenNest.Data) holds the mapping; the desktop applies it.
|
|
|
|
## Lookup
|
|
|
|
The machine's material must match the nest's material name, and its grade when the nest
|
|
has one (otherwise the first grade on file). The thickness matches within 0.001 in after
|
|
converting the nest's thickness to the machine's units, so a thickness rounded to three
|
|
decimals (PEP stores 3/16 as 0.188) finds the machine's 0.1875; the nearest one wins. With no match, or no machine on
|
|
file, nothing changes and the previous behavior applies. Lengths are converted from the
|
|
machine's units to the nest's.
|
|
|
|
## Lead-ins and lead-outs
|
|
|
|
A plate with no cutting parameters of its own (Plan Cutting, Place Lead-in) starts from the
|
|
last applied parameters, as before, with the machine's leads and kerf laid over them and the
|
|
machine, material, grade and thickness recorded on the parameters. When the last parameters
|
|
already record the same machine, material, grade and thickness, the machine's settings are not
|
|
laid over them again, so lead and tab edits made for that job stick; the cutting panel keeps the
|
|
record (and the kerf) through an edit. Plan Cutting saves its settings as the last parameters as
|
|
soon as its settings dialog is accepted, not only on Apply. A plate that already has
|
|
parameters keeps them: changing the machine, material or thickness does not rewrite leads
|
|
the plate was planned with.
|
|
|
|
Each thickness holds a lead-in and lead-out for outside cuts (the Outside Cuts tab, external
|
|
contours) and, optionally, its own pair for inside cuts (the Inside Cuts tab, internal contours,
|
|
full circles included). Inside cuts use the outside pair until "Same as outside cuts" is cleared,
|
|
which starts them from a copy of it; configurations saved before the split have no inside pair
|
|
and keep applying one pair to both. Both tabs use the shared `LeadsEditor` control that Cutting
|
|
Settings uses, without the fields the configuration cannot hold (an arc's sweep; a clean hole's kerf,
|
|
which comes from the thickness). Types map as follows:
|
|
|
|
| Machine type | Lead-in |
|
|
|---|---|
|
|
| None | none |
|
|
| Line | line (length, angle) |
|
|
| Arc | arc (radius; the default 180-degree half-circle sweep) |
|
|
| Line + Arc | line-arc (length, radius, angle) |
|
|
| Clean Hole | clean hole (length, radius, the thickness's kerf), inside cuts only; an outside Clean Hole (older configurations) keeps the external lead-in |
|
|
| Line + Line | not offered; an older configuration's is not mapped (it has no second segment): the lead-in it would set is kept |
|
|
|
|
Lead-outs map None, Line (length, angle) and Arc (radius); any other type is none.
|
|
|
|
## Cut-offs
|
|
|
|
The plate view's part clearance, overtravel, minimum segment length and direction come from
|
|
the machine's cut-off settings when a nest opens, when Nest > Machine changes the machine and
|
|
after Nest > Edit saves. The head-locked overcut choice is kept. Existing cut-offs are not
|
|
regenerated at that moment; they follow the settings the next time they regenerate.
|