mirror of
https://github.com/ajisaacs/OpenNest.git
synced 2026-11-17 01:15:34 -05:00
Machine configurations already held a lead-in, lead-out, kerf and cut-off per material thickness, but nothing read them: Plan Cutting and Place Lead-in started from whatever was last applied (often another machine's or another thickness's leads), and cut-offs used fixed view defaults. Now that nests carry a machine, those values can be the starting point. - MachineCuttingDefaults maps a machine's thickness settings for the nest's material/grade/thickness onto CuttingParameters and CutOffSettings, converting units. Clean Hole stays on holes; Line + Line is not mapped because the configuration lacks the second segment. - Plates without their own parameters start from the last-applied ones with the machine's leads and kerf laid over them; plates with parameters keep them. - The plate view's cut-off clearance, overtravel, minimum segment and direction follow the machine on open, on Nest > Machine and after Nest > Edit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
44 lines
2.1 KiB
Markdown
44 lines
2.1 KiB
Markdown
# Machine cutting defaults
|
|
|
|
A nest's assigned machine (`Nest.Machine`, see [nest file format](nest-file-format.md))
|
|
supplies the starting lead-ins, lead-outs, kerf and cut-off settings for the nest's
|
|
material and thickness, from that machine's Tools > Machine Configuration entry.
|
|
`MachineCuttingDefaults` (OpenNest.Data) holds the mapping; the desktop applies it.
|
|
|
|
## Lookup
|
|
|
|
The machine's material must match the nest's material name, and its grade when the nest
|
|
has one (otherwise the first grade on file). The thickness matches within 0.0005 in after
|
|
converting the nest's thickness to the machine's units. With no match, or no machine on
|
|
file, nothing changes and the previous behavior applies. Lengths are converted from the
|
|
machine's units to the nest's.
|
|
|
|
## Lead-ins and lead-outs
|
|
|
|
A plate with no cutting parameters of its own (Plan Cutting, Place Lead-in) starts from the
|
|
last applied parameters, as before, with the machine's leads and kerf laid over them and the
|
|
machine, material, grade and thickness recorded on the parameters. A plate that already has
|
|
parameters keeps them: changing the machine, material or thickness does not rewrite leads
|
|
the plate was planned with.
|
|
|
|
The machine holds one lead-in and one lead-out per thickness; both go to external, internal
|
|
and arc/circle contours. Types map as follows:
|
|
|
|
| Machine type | Lead-in |
|
|
|---|---|
|
|
| None | none |
|
|
| Line | line (length, angle) |
|
|
| Arc | arc (radius) |
|
|
| Line + Arc | line-arc (length, radius, angle) |
|
|
| Clean Hole | clean hole (length, radius, the thickness's kerf), holes only: the external lead-in is kept |
|
|
| Line + Line | not mapped (the configuration has no second segment): every lead-in is kept |
|
|
|
|
Lead-outs map None, Line (length, angle) and Arc (radius); any other type is none.
|
|
|
|
## Cut-offs
|
|
|
|
The plate view's part clearance, overtravel, minimum segment length and direction come from
|
|
the machine's cut-off settings when a nest opens, when Nest > Machine changes the machine and
|
|
after Nest > Edit saves. The head-locked overcut choice is kept. Existing cut-offs are not
|
|
regenerated at that moment; they follow the settings the next time they regenerate.
|