ajandClaude Opus 5.5 479883e7ac feat(cutting): tab parts by width when the plate has no support bed ...

With support tabs on and no support bed, nothing was tabbed and nothing
said so. A new no-bed width range (NoBedTabMinWidth..NoBedTabMaxWidth,
the short side of the part's minimum-area bounding rectangle) now picks
the parts to tab instead. SupportTabSettings.Analyze makes the choice
for Plan Cutting, hand-placed lead-ins and the pre-post review; without
a bed any tab clear of inside corners counts. With no bed and no range,
the plan notes that nothing was tabbed. Cutting Settings > Tabs gains
the range fields, and the values persist with the cutting parameters.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-25 22:02:31 -04:00

..

BestEffortCuttingPlanTests.cs

fix(cutting): route best-effort holes instead of cutting them in source order

2026-10-19 11:08:51 -04:00

CircleNextCutTests.cs

fix(cutting): aim round cutouts toward the next cut

2026-10-07 20:55:40 -04:00

ClampZonePreviewTests.cs

fix(cutting): keep clamp zones on cutting-plan previews

2026-10-13 18:15:49 -04:00

ContinuedContourCheckTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

ContourCandidateEmissionTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

ContourCutPinTests.cs

feat(core): contour cut pins

2026-10-16 15:33:20 -04:00

ContourEntryCandidateTests.cs

feat(cad): add tabbed cutouts with draggable tabs

2026-10-18 00:50:11 -04:00

ContourEntryFeasibilityTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

ContourEntryRankingTests.cs

feat(cutting): rank contour entries toward the next cut

2026-10-07 02:51:06 -04:00

ContourEntrySelectionTests.cs

refactor(ui): rephrase negative-tone disclaimers as affirmative guidance

2026-10-12 07:45:23 -04:00

ContourRecoveryFileTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

CutOffSegmentPlanningTests.cs

feat(cutting): plan each scrap cut-off segment where the route passes it

2026-10-22 11:38:38 -04:00

CutPinFrameLifecycleTests.cs

test(core): pin frame lifecycle

2026-10-16 15:33:21 -04:00

CutPinResolverTests.cs

feat(core): contour cut pins

2026-10-16 15:33:20 -04:00

CuttingCaptureFidelityTests.cs

fix(cutting): validate original graphs before capture clones

2026-10-04 21:56:49 -04:00

CuttingCaptureRotationTests.cs

fix(cutting): preserve clean geometry through shared graph rotation

2026-10-04 22:26:22 -04:00

CuttingDependencyTests.cs

feat(cutting): plan each scrap cut-off segment where the route passes it

2026-10-22 11:38:38 -04:00

CuttingGridOrderTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

CuttingHoleOrderTests.cs

feat(cutting): propose hole paths toward the perimeter entry

2026-10-07 11:43:26 -04:00

CuttingNestedOrderTests.cs

fix(cutting): trim baked-in seam overcuts and route parts nested in cutouts

2026-10-12 13:40:32 -04:00

CuttingPartOrderTests.cs

fix(cutting): order parts as a short tour and learn blocked approaches

2026-10-05 23:41:11 -04:00

CuttingPlanBatchTests.cs

feat(planning): add a Cut planning effort setting that scales the search budget

2026-10-19 20:54:28 -04:00

CuttingPlanCommitTests.cs

fix(cutting): create plate-scoped requests through a factory

2026-10-05 00:28:59 -04:00

CuttingPlanMessageTests.cs

feat(planning): add a Cut planning effort setting that scales the search budget

2026-10-19 20:54:28 -04:00

CuttingPlanServiceTests.cs

Support direct contour piercing and correct planner geometry checks

2026-10-10 16:44:03 -04:00

CuttingProposalInspectionTests.cs

feat(cutting-ui): plan and apply all plates from docked panel

2026-10-11 21:40:26 -04:00

CuttingReplayContractTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

DisplayPerimeterHoleOrderTests.cs

fix(planning): learn a door's hole order when a hop crosses its own cut holes

2026-10-23 07:43:39 -04:00

DisplayPerimeterPostTests.cs

fix(posts): refuse unpostable blanks before writing and malformed tails

2026-10-22 20:30:33 -04:00

DisplayPerimeterTests.cs

fix(cut-offs): accept a blank's outline a rounding step past the sheet

2026-10-23 05:55:32 -04:00

DrawingPinCaptureTests.cs

fix(ui): point operator messages at commands that exist

2026-10-19 12:15:40 -04:00

DrawingPinReviewTests.cs

feat(planning): warn about tipping parts and retire legacy lead-in assignment

2026-10-20 23:54:40 -04:00

ExplicitCircleIdentityTests.cs

fix(cutting): share only exact prepared circle programs

2026-10-04 21:36:40 -04:00

ExplicitContourTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

FixedLeadWarningTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

HeadLockedCutOffPlanningTests.cs

feat(cutoffs): head-locked overcut at the far edge, reversible by Plan Cutting

2026-10-23 09:51:59 -04:00

HoleDepartureTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

HoleEndpointBudgetTests.cs

perf(cutting): defer alternate hole entries in preferred pass

2026-10-11 20:26:47 -04:00

HoleLookAheadTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

ImportedArcHoleTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

IncrementalClosureDriftTests.cs

fix(planning): close incremental rounding drift at contour seams

2026-10-19 20:16:02 -04:00

InterlockingHoleRouteTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

JointCuttingPlanTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

LazyCuttingSearchTests.cs

perf(cutting): generate ranked alternatives only when visited

2026-10-09 20:40:10 -04:00

LeadMaterialSnapshotTests.cs

Support direct contour piercing and correct planner geometry checks

2026-10-10 16:44:03 -04:00

LeadPathValidationTests.cs

fix(cutting): start tabbed lead-outs at the trimmed cut end

2026-10-04 23:13:41 -04:00

MaterialContainmentTests.cs

fix(cutting): keep ray parity consistent across nominal closure seams

2026-10-12 03:50:54 -04:00

MaterialRuntimeTypeTests.cs

fix(cutting): guard material runtime semantics before capture

2026-10-04 21:36:40 -04:00

NativeContactRegressionTests.cs

perf(cutting): reuse native curve wrappers for lead queries

2026-10-09 19:15:28 -04:00

NearbyMaterialCheckTests.cs

perf(planning): skip lead checks against material no native query can reach

2026-10-19 20:16:03 -04:00

NominalContourClosureTests.cs

Support direct contour piercing and correct planner geometry checks

2026-10-10 16:44:03 -04:00

OwnedCuttingParameterTests.cs

feat(cutting): tab parts by width when the plate has no support bed

2026-10-25 22:02:31 -04:00

OwnedProgramCopyTests.cs

fix(cutting): retain authored motion metadata in owned programs

2026-10-04 21:56:49 -04:00

PerimeterLookAheadTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

PierceZoneTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

PinnedContourTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

PinnedLeadWarningTests.cs

fix(ui): point operator messages at commands that exist

2026-10-19 12:15:40 -04:00

PlanningCharacterizationTests.cs

feat(engine): fixed-lead violations warn instead of refusing

2026-10-16 15:33:23 -04:00

PreferredContourEntriesTests.cs

fix(cutting): exclude scribes from downstream pierce targets

2026-10-07 14:46:30 -04:00

PreparedContourTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

ProblemNestRegressionTests.cs

test(planning): hold problem nests to a cut-off baseline

2026-10-25 19:17:51 -04:00

ReorderSearchTests.cs

test(cutting): add opt-in complete-route performance probe

2026-10-09 19:15:09 -04:00

ReplayPoseBindingTests.cs

fix(cutting): certify complete selected contour programs

2026-10-04 22:02:56 -04:00

SafestRouteFallbackTests.cs

feat(planning): offer the safest route when the strict search runs out

2026-10-22 11:37:17 -04:00

SeamClosureReplayTests.cs

fix(cutting): plan outlines with a seam gap before an arc, and memoize lead checks

2026-10-18 21:21:20 -04:00

SeamOvercutTests.cs

fix(cutting): trim baked-in seam overcuts and route parts nested in cutouts

2026-10-12 13:40:32 -04:00

SettingsFreshnessTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

SideCoverageRegressionTests.cs

refactor(cutting): merge circle lead settings into internal leads

2026-10-24 21:20:09 -04:00

SupportTabPlanningTests.cs

feat(planning): warn about tipping parts and retire legacy lead-in assignment

2026-10-20 23:54:40 -04:00