Files
OpenNest/OpenNest
ajandClaude Fable 5.2 f5fae5c9e1 fix(plate): pushes stop at an outlined sheet's edge; outline import keeps straight edges exact
A plate with a custom outline was pushed against its bounding box only, so
a part pushed toward a missing corner ran through it to the box edge and
ended off the sheet. Compactor's plate pushes (Push, PushBoundingBox,
SettlePlacement, Settle) now also stop at the walls of the outline: the
part of the work area that is not usable material (a missing corner, an
obstacle, each grown by the largest edge spacing). A mover is measured as
the edge review measures it, by the circumscribed perimeter of its clean
material without leads, so it rests where that review still passes. A box
push stops 0.0012 short of a wall so the geometry push after it starts
clear. A rectangular sheet has no walls and pushes exactly as before.

SheetOutline.FromGeometry eroded the whole imported outline by the chord
tolerance, so a sheet drawn 60 x 27 was stored as 59.998 x 26.998 with a
chamfer at every inside corner. Each arc is now chorded on the side that
takes material away (ClipperBridge.FlattenOneSided) and straight edges are
kept exactly. The plate header, the plate list and Edit Plate's outline
size show the size rounded to four decimals instead of the raw double.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-20 07:49:11 -05:00
..