refactor(core): move cut-offs into OpenNest.CutOffs

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>

OpenNest.Benchmark/BenchmarkJob.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.IO;
 using System.Linq;
 using OpenNest.Clamps;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Jobs;
 using OpenNest.Engine.Jobs.Adapters;
 using OpenNest.Geometry;

OpenNest.Benchmark/DxfManifestLoader.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.IO;
 using System.Linq;
 using System.Text.Json;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Core/AppliedCuttingWork.cs

@@ -1,6 +1,7 @@
 using System;
 using System.Collections.Generic;
 using System.Linq;
+using OpenNest.CutOffs;
 
 namespace OpenNest;
 

OpenNest.Core/CNC/CuttingPlanning/CuttingPlanCommit.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.CNC.CuttingPlanning;

OpenNest.Core/CNC/CuttingPlanning/PlateCuttingState.cs

@@ -5,6 +5,7 @@ using System.Threading;
 using OpenNest.CNC.CuttingStrategy;
 using OpenNest.Collections;
 using OpenNest.CommonLines;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.CNC.CuttingPlanning;

OpenNest.Core/CutOffs/AutomaticCutOffBatch.cs

@@ -2,7 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Linq;
 
-namespace OpenNest;
+namespace OpenNest.CutOffs;
 
 /// <summary>
 /// Plans and applies the same automatic-cutoff settings to a stable, ordered set of plates.

OpenNest.Core/CutOffs/AutomaticCutOffPlanner.cs

@@ -7,7 +7,7 @@ using OpenNest.Converters;
 using OpenNest.Geometry;
 using OpenNest.Math;
 
-namespace OpenNest;
+namespace OpenNest.CutOffs;
 
 public sealed class AutomaticCutOffOptions
 {

OpenNest.Core/CutOffs/AutomaticCutOffStripSearch.cs

@@ -3,7 +3,7 @@ using System.Collections.Generic;
 using System.Globalization;
 using System.Numerics;
 
-namespace OpenNest;
+namespace OpenNest.CutOffs;
 
 /// <summary>Exact layered search over sorted positions; each transition uses a sliding minimum.</summary>
 internal static class AutomaticCutOffStripSearch

OpenNest.Core/CutOffs/CutOff.cs

@@ -3,7 +3,7 @@ using System.Linq;
 using OpenNest.CNC;
 using OpenNest.Geometry;
 
-namespace OpenNest
+namespace OpenNest.CutOffs
 {
     public enum CutOffAxis
     {

OpenNest.Core/CutOffs/CutOffSegments.cs

@@ -2,7 +2,7 @@ using System.Collections.Generic;
 using OpenNest.CNC;
 using OpenNest.Geometry;
 
-namespace OpenNest
+namespace OpenNest.CutOffs
 {
     /// <summary>
     /// One placed cutting segment of a cut-off: the part that cuts it, where its cut runs along

OpenNest.Core/CutOffs/CutOffSettings.cs

@@ -1,4 +1,4 @@
-namespace OpenNest
+namespace OpenNest.CutOffs
 {
     public enum CutDirection
     {

OpenNest.Core/CutOffs/CutOffTrim.cs

@@ -3,7 +3,7 @@ using System.Linq;
 using OpenNest.Geometry;
 using OpenNest.Math;
 
-namespace OpenNest
+namespace OpenNest.CutOffs
 {
     /// <summary>
     /// The limits and gaps one cut-off takes when a <see cref="CutOffEdit"/> is applied; null

OpenNest.Core/Diagnostics/ClampCutDiagnostics.cs

@@ -1,6 +1,7 @@
 using System;
 using System.Collections.Generic;
 using OpenNest.Clamps;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Diagnostics;

OpenNest.Core/Diagnostics/OverlapGeometryStamp.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.Linq;
 using OpenNest.Clamps;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 
 namespace OpenNest.Diagnostics;
 

OpenNest.Core/Plate.CutOffs.cs

@@ -2,6 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Linq;
 using OpenNest.Collections;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest

OpenNest.Core/Plate.cs

@@ -4,6 +4,7 @@ using System.Linq;
 using OpenNest.Clamps;
 using OpenNest.Collections;
 using OpenNest.CommonLines;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Support;
 

OpenNest.Core/PlateRemnant.cs

@@ -2,6 +2,7 @@ using System;
 using System.Collections.Generic;
 using System.Linq;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Math;
 

OpenNest.Core/Splitting/AutoSplitCalculator.cs

@@ -1,4 +1,5 @@
 using System.Collections.Generic;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest;

OpenNest.Core/Splitting/DrawingSplitter.cs

@@ -1,6 +1,7 @@
 using System.Collections.Generic;
 using System.Linq;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Math;
 

OpenNest.Core/Splitting/SpikeGrooveSplit.cs

@@ -1,4 +1,5 @@
 using System.Collections.Generic;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Math;
 

OpenNest.Core/Splitting/SplitLine.cs

@@ -1,4 +1,5 @@
 using System.Collections.Generic;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest;

OpenNest.Core/Splitting/SplitLineIntersect.cs

@@ -1,4 +1,5 @@
 using System.Collections.Generic;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Math;
 

OpenNest.Core/Splitting/StraightSplit.cs

@@ -1,4 +1,5 @@
 using System.Collections.Generic;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest;

OpenNest.Core/Splitting/WeldGapTabSplit.cs

@@ -1,4 +1,5 @@
 using System.Collections.Generic;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest;

OpenNest.Data/MachineCuttingDefaults.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Data;

OpenNest.Desktop.Tests/MachineSettingsSourceTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Data;
 
 namespace OpenNest.Desktop.Tests;

OpenNest.Desktop.Tests/Rendering/PlateSceneTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.Clamps;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Desktop.Rendering;
 using OpenNest.Geometry;
 using OpenNest.Support;

OpenNest.Desktop.Tests/SavedCutOffHeadLockTests.cs

@@ -1,3 +1,5 @@
+using OpenNest.CutOffs;
+
 namespace OpenNest.Desktop.Tests;
 
 public class SavedCutOffHeadLockTests

OpenNest.Desktop/MachineSettingsSource.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.IO;
 using System.Linq;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Data;
 using OpenNest.IO;
 

OpenNest.Desktop/Rendering/PlateOverlays.cs

@@ -3,6 +3,7 @@ using System.Linq;
 using System.Runtime.CompilerServices;
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Support;
 

OpenNest.Desktop/SavedCutOffHeadLock.cs

@@ -1,5 +1,6 @@
 using System;
 using System.Collections.Generic;
+using OpenNest.CutOffs;
 
 namespace OpenNest.Desktop;
 

OpenNest.Engine.Tests/CutOffBoundedFillTests.cs

@@ -1,3 +1,4 @@
+using OpenNest.CutOffs;
 using OpenNest.Engine.Jobs.Placement;
 using OpenNest.Engine.Tests.Jobs;
 using OpenNest.Geometry;

OpenNest.Engine.Tests/Fill/ExpanderCutoffDeltaTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Fill;
 using OpenNest.Engine.Tests.Jobs;
 using OpenNest.Geometry;

OpenNest.Engine.Tests/Fill/ExpanderCutoffQuadrantTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Fill;
 using OpenNest.Engine.Tests.Jobs;
 using OpenNest.Geometry;

OpenNest.Engine.Tests/Fill/ExpanderFinalQualityTests.cs

@@ -1,6 +1,7 @@
 using System.Collections.Generic;
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Fill;
 using OpenNest.Engine.Tests.Jobs;
 using OpenNest.Geometry;

OpenNest.Engine.Tests/Jobs/ClampRemovalRecoveryTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.Clamps;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Jobs;
 using OpenNest.Engine.NestingEngines.Rectangles;
 using OpenNest.Engine.Tests.NestingEngines;

OpenNest.Engine.Tests/Jobs/ClampZoneSheetFrameTests.cs

@@ -3,6 +3,7 @@ using System.Linq;
 using System.Threading;
 using OpenNest.Clamps;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Diagnostics;
 using OpenNest.Engine.Jobs;
 using OpenNest.Engine.Jobs.Adapters;

OpenNest.Engine.Tests/Jobs/NestJobCostTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Jobs;
 using OpenNest.Geometry;
 

OpenNest.Engine.Tests/NestingEngines/DefaultNestingEngineTests.cs

@@ -1,3 +1,4 @@
+using OpenNest.CutOffs;
 using OpenNest.Engine.Jobs;
 using OpenNest.Engine.NestingEngines;
 using OpenNest.Engine.NestingEngines.Default;

OpenNest.Engine.Tests/NestingEngines/IrregularSearchUntilCancelledTests.cs

@@ -1,3 +1,4 @@
+using OpenNest.CutOffs;
 using OpenNest.Engine.Jobs;
 using OpenNest.Engine.NestingEngines;
 using OpenNest.Engine.NestingEngines.Default;

OpenNest.Engine/CuttingPlanning/CuttingDependencyGraph.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
 using OpenNest.CNC.CuttingPlanning;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Math;
 

OpenNest.Engine/CuttingPlanning/CuttingPlanModels.cs

@@ -4,6 +4,7 @@ using System.Linq;
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Diagnostics;
 using OpenNest.Geometry;
 using OpenNest.Support;

OpenNest.Engine/CuttingPlanning/CuttingPlanService.cs

@@ -4,6 +4,7 @@ using System.Linq;
 using System.Threading;
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
+using OpenNest.CutOffs;
 using OpenNest.Diagnostics;
 using OpenNest.Geometry;
 using OpenNest.Support;

OpenNest.Engine/Jobs/NestJobCost.cs

@@ -1,5 +1,6 @@
 using System;
 using System.Linq;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Jobs.Adapters;
 using OpenNest.Geometry;
 

OpenNest.Engine/Jobs/NestJobOptions.cs

@@ -1,6 +1,7 @@
 using System;
 using OpenNest;
 using OpenNest.CommonLines;
+using OpenNest.CutOffs;
 
 namespace OpenNest.Engine.Jobs;
 

OpenNest.Engine/Jobs/Remote/NestJobDocument.cs

@@ -4,6 +4,7 @@ using System.Linq;
 using System.Text.Json;
 using System.Text.Json.Serialization;
 using OpenNest.CommonLines;
+using OpenNest.CutOffs;
 
 namespace OpenNest.Engine.Jobs.Remote;
 

OpenNest.Engine/Sequencing/PlateSequencing.cs

@@ -1,6 +1,7 @@
 using System.Collections.Generic;
 using System.Linq;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Engine.CuttingPlanning;
 
 namespace OpenNest.Engine.Sequencing

OpenNest.FrontEnd.Tests/McpPlateToolsTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 using OpenNest.Mcp;

OpenNest.IO.Tests/ClampEdgePersistenceTests.cs

@@ -2,6 +2,7 @@ using System.IO.Compression;
 using System.Text;
 using System.Text.Json.Nodes;
 using OpenNest.Clamps;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using static OpenNest.IO.Tests.NestArchiveJson;
 

OpenNest.IO.Tests/ClampRailPersistenceTests.cs

@@ -3,6 +3,7 @@ using System.Text;
 using System.Text.Json;
 using System.Text.Json.Nodes;
 using OpenNest.Clamps;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using static OpenNest.IO.Tests.NestArchiveJson;
 

OpenNest.IO.Tests/ClampZonePersistenceTests.cs

@@ -1,6 +1,7 @@
 using System.IO.Compression;
 using System.Text;
 using OpenNest.Clamps;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using static OpenNest.IO.Tests.NestArchiveJson;
 

OpenNest.IO.Tests/CommonLinePersistenceTests.cs

@@ -3,6 +3,7 @@ using System.Text;
 using System.Text.Json.Nodes;
 using OpenNest.CNC;
 using OpenNest.CommonLines;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using static OpenNest.IO.Tests.NestArchiveJson;
 

OpenNest.IO.Tests/ExpectedRemnantPersistenceTests.cs

@@ -1,4 +1,5 @@
 using System.Text.Json.Nodes;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Shapes;
 using static OpenNest.IO.Tests.NestArchiveJson;

OpenNest.IO.Tests/NestSnapshotTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC.CuttingStrategy;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.IO.Tests;

OpenNest.IO.Tests/SheetOutlinePersistenceTests.cs

@@ -1,4 +1,5 @@
 using System.Text.Json.Nodes;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using static OpenNest.IO.Tests.NestArchiveJson;
 

OpenNest.IO.Tests/SupportGridPersistenceTests.cs

@@ -1,5 +1,6 @@
 using System.Text.Json.Nodes;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Support;
 using static OpenNest.IO.Tests.NestArchiveJson;

OpenNest.IO/NestReader.cs

@@ -14,6 +14,7 @@ using OpenNest.CNC;
 using OpenNest.CNC.CuttingStrategy;
 using OpenNest.CommonLines;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Dimensions;
 using OpenNest.Geometry;
 using OpenNest.Support;

OpenNest.IO/NestWriter.cs

@@ -11,6 +11,7 @@ using OpenNest.BestFit;
 using OpenNest.Clamps;
 using OpenNest.CNC;
 using OpenNest.CommonLines;
+using OpenNest.CutOffs;
 using OpenNest.Support;
 using static OpenNest.IO.NestFormat;
 

OpenNest.Server.Tests/NestSheetsTests.cs

@@ -1,6 +1,7 @@
 using System.Net;
 using System.Net.Http.Json;
 using System.Text.Json;
+using OpenNest.CutOffs;
 using OpenNest.Data;
 using OpenNest.Geometry;
 

OpenNest.Tests/Benchmark/JobLoaderManifestTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.Benchmark;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Engine.Jobs;
 

OpenNest.Tests/CNC/PlateRapidEnumeratorTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CNC/PostContoursTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.CNC.Posting;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CNC;

OpenNest.Tests/Cincinnati/HeadLockedCutOffPostTests.cs

@@ -1,4 +1,5 @@
 using System.Text;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Posts.Cincinnati;
 using OpenNest.Posts.CincinnatiCIFiber;

OpenNest.Tests/Cincinnati/UserVariablePostTests.cs

@@ -2,6 +2,7 @@ using System.IO;
 using System.Linq;
 using System.Text;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 using OpenNest.Posts.Cincinnati;

OpenNest.Tests/CincinnatiCIFiber/CIFiberPostProcessorTests.cs

@@ -7,6 +7,7 @@ using System.Text;
 using System.Text.RegularExpressions;
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Engine;
 using OpenNest.Engine.Sequencing;
 using OpenNest.Geometry;

OpenNest.Tests/CutOffs/AutomaticCutOffBatchTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CutOffs/AutomaticCutOffHorizontalRemnantTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.Clamps;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Math;
 

OpenNest.Tests/CutOffs/AutomaticCutOffLifecycleTests.cs

@@ -2,6 +2,7 @@ using System.IO.Compression;
 using System.Text.Json;
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 using OpenNest.Math;

OpenNest.Tests/CutOffs/AutomaticCutOffPlannerTests.cs

@@ -2,6 +2,7 @@ using System.Reflection;
 using OpenNest.Clamps;
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.Math;
 

OpenNest.Tests/CutOffs/AutomaticCutOffShiftClampTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.Clamps;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/AutomaticCutOffShiftLifecycleTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CutOffs/AutomaticCutOffShiftTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/AutomaticCutOffStripSearchTests.cs

@@ -1,3 +1,5 @@
+using OpenNest.CutOffs;
+
 namespace OpenNest.Tests.CutOffs;
 
 public class AutomaticCutOffStripSearchTests

OpenNest.Tests/CutOffs/CutOffEdgeClearanceTests.cs

@@ -2,6 +2,7 @@ using System.Collections.Generic;
 using System.Linq;
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffFirstCrossingTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffGapTests.cs

@@ -1,6 +1,7 @@
 using OpenNest.Clamps;
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
+using OpenNest.CutOffs;
 using OpenNest.Diagnostics;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Engine.Sequencing;

OpenNest.Tests/CutOffs/CutOffGeometryTests.cs

@@ -1,6 +1,7 @@
 using System.Collections.Generic;
 using System.Linq;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffJointsTests.cs

@@ -1,3 +1,4 @@
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffLeadClearanceTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CutOffs/CutOffMeasurementTests.cs

@@ -1,5 +1,6 @@
 using System.Reflection;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffRoundoffTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CutOffs/CutOffSegmentsTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffSeparationTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffSequenceTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CutOffs/CutOffSerializationTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CutOffs/CutOffTests.cs

@@ -1,5 +1,6 @@
 using System.Linq;
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/CutOffTrimTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Engine.Sequencing;
 using OpenNest.Geometry;
 

OpenNest.Tests/CutOffs/CutOffVertexParityTests.cs

@@ -2,6 +2,7 @@ using System.Collections.Generic;
 using System.Linq;
 using OpenNest.CNC;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 
 namespace OpenNest.Tests.CutOffs;

OpenNest.Tests/CutOffs/HeadLockedCutOffTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Geometry;
 using OpenNest.IO;
 

OpenNest.Tests/CutOffs/PlannerCutOffStagingTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
+using OpenNest.CutOffs;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Geometry;
 using OpenNest.Tests.CuttingPlanning;

OpenNest.Tests/CuttingPlanning/CutOffArrivalOrderTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
+using OpenNest.CutOffs;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Engine.Sequencing;
 using OpenNest.Geometry;

OpenNest.Tests/CuttingPlanning/CutOffSegmentPlanningTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
+using OpenNest.CutOffs;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Engine.Sequencing;
 using OpenNest.Geometry;

OpenNest.Tests/CuttingPlanning/CutPinResolverTests.cs

@@ -2,6 +2,7 @@ using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
 using OpenNest.CNC.CuttingStrategy;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Engine;
 using OpenNest.Geometry;
 using OpenNest.Math;

OpenNest.Tests/CuttingPlanning/CuttingDependencyTests.cs

@@ -1,6 +1,7 @@
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Geometry;
 using static OpenNest.Tests.TestHelpers;

OpenNest.Tests/CuttingPlanning/CuttingPlanCommitTests.cs

@@ -3,6 +3,7 @@ using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
 using OpenNest.CNC.CuttingStrategy;
 using OpenNest.Collections;
+using OpenNest.CutOffs;
 using OpenNest.Diagnostics;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Geometry;

OpenNest.Tests/CuttingPlanning/DisplayPerimeterTests.cs

@@ -1,6 +1,7 @@
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
 using OpenNest.Converters;
+using OpenNest.CutOffs;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Geometry;
 

OpenNest.Tests/CuttingPlanning/HeadLockedCutOffPlanningTests.cs

@@ -1,5 +1,6 @@
 using OpenNest.CNC;
 using OpenNest.CNC.CuttingPlanning;
+using OpenNest.CutOffs;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Geometry;
 

OpenNest.Tests/CuttingPlanning/ProblemNestRegressionTests.cs

@@ -1,6 +1,7 @@
 using System.Diagnostics;
 using System.Text.RegularExpressions;
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Data;
 using OpenNest.Engine.CuttingPlanning;
 using OpenNest.Engine.Sequencing;

OpenNest.Tests/Data/MachineCuttingDefaultsTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC.CuttingStrategy;
+using OpenNest.CutOffs;
 using OpenNest.Data;
 using OpenNest.Geometry;
 

OpenNest.Tests/Data/NestDetailsTests.cs

@@ -1,4 +1,5 @@
 using OpenNest.CNC;
+using OpenNest.CutOffs;
 using OpenNest.Data;
 using OpenNest.Geometry;