The part cut first no longer makes a separate uncompensated centerline
cut with its own lead-in and lead-out, then re-pierces for its
remainder. It cuts its outside compensated, which puts its shared edge
on the kerf centerline, starting on the common line: a straight lead-in
from the scrap along the shared edge, then the line and on round its
perimeter with no lead-out. A member with spans already cut stops in
that kerf and cuts its last stretch from it, ending beside the part it
is cut before. Partners still cut only their remainders.
Replay's tabbed-ring accounting now accepts pieces that tile each span
exactly once, and the pre-post review counts a span as cut by a
member's compensated edge (or an older centerline cut).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Straight spans of one pair that meet at a corner chain into one shared
path (CommonLineGeometry.Paths). Plan Cutting cuts it as one open
centerline cut through its corners, pierced and left in scrap along its
end legs; each member's spans run on to its own vertex at a corner, so
the path is one tab run. Join Common Line slides along the main edge so
the step of a Z or L also lands one kerf apart, and the plate draws the
path through its corners.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copy and Cut paste through ActionClone, which added each clone to the plate
but never recorded the groups the sources were in, so a pasted common-line
pair came out as separate parts held to the part spacing. ActionClone now
reads the copied parts' groups when it starts (before Cut removes the
sources and their groups) and joins each paste's clones the same way, at the
source group's kerf.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Moving one member of a common-line group used to break the group, so a drag
or nudge silently undid a join. Selecting a member, by click or window, now
selects its whole group, so drag, nudge, push, rotate and align carry the
joined parts together and keep their shared spans.
Right-clicking a part now offers Join Common Line and Remove Common Line,
running the Plate > Arrange commands on the selection. A right-click on a part
keeps its selection (or selects it with its group) instead of clearing it, so
the menu has something to act on; a right-click on empty plate still clears.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Slice 3 of common-line cutting. On costly plate (N26-295: 3/16 RA310S at about
$2,500 a sheet) pairing parts one kerf apart fits the part the spacing cannot:
the last plate's 38 parts fit on one 48x120 with Auto Nest only with pairs.
- Drawing Properties gains "Allow common line" (Drawing.AllowCommonLine, off by
default because customer edge-quality needs vary). The nest's CommonLineUsage
(Off / When it adds parts / Whenever available) is set in Auto Nest and seeded
from Tools > Nest Defaults; both persist (nest.json, defaults.json).
- NestPipeline runs the ordinary solve, then, with a level on, trials where
eligible parts are offered as kerf-gap pair compounds. Placed pairs expand into
parts plus explicit NestJobCommonLine groups, are validated again, and
CommonLineRanking keeps a trial only by the level: count first, then sheets;
"when it adds parts" keeps the plain layout on a tie, "whenever" also takes a
shorter cut or less material, never at the cost of a part. Engines, FillScore
and their comparers are unchanged; Off asks the engine exactly what it did.
- NestLayoutCheck exempts members only through a sheet's explicit group list and
only when the job allows common lines; materializing and committing create
Plate.CommonLines.
- Server nesting writes common-line jobs as version 3 and replays the recorded
trial answers, so the desktop binds the same groups.
- Fill Area honors the level through a PlateFillService overload.
- The benchmark gains --common-lines <level> --kerf <k>.
Benchmark (synthetic nests + N26-295, --parallel 1): with no flag and with
--common-lines off every engine matches the base commit; with a level on no
layout becomes invalid and three runs save a sheet at equal nested area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
N26-295's PT42 pairs saved spacing in slice 1 but every shared edge was
still cut twice, costing a pass per edge and risking a freed part
tipping under the head on the second pass.
Plan Cutting now cuts a plate's common lines once unless the plate is set
to cut them twice. Each group is cut member by member, owner before
partner (a captured dependency that search and replay enforce, so a kept
order cutting the partner first is a constraint conflict): the member's
holes, then the shared cuts it owns as open CommonLine centerline cuts
entered through the notch on the span's axis, then its remainder pieces,
each ramped in from the kerf the shared cut opened. Capture marks the
shared spans as tabs on the owned clean copy, so replay's contour
accounting proves each perimeter is cut exactly once; a lead that fits
at neither end refuses as UnsupportedGeometry naming the span, never
shortened. Material still comes from the drawing, so utilization,
quantity and overlap results do not change. Members are never
support-tabbed; locked or excluded members and broken groups refuse.
The CI Fiber post writes shared cuts in the cut-off form with a lead-in
and no G41/G42, and remainders in the contour form on their perimeter's
compensation side, named by a remainder comment. Cincinnati CL (whose
PreApplied mode offsets nothing) and Gravograph refuse such nests, as do
the desktop and console for any post without ICommonLinePostProcessor;
nothing falls back to a silent double cut. Plate > Arrange > Cut Common
Lines Twice keeps slice 1's behavior, persists with the plate and makes
an open plan stale.
Pre-post review now checks each span is cut once, on its centerline, by
the member cut first, and the rapid check treats a finished member's
remainders as an obstacle. Compensation start in void and cancel in
kerf are unconfirmed on the CI FIBER 4020; release waits on a 3/16
stainless coupon trial.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Expensive alloy jobs (N26-295, 310 stainless) could not fit their last
PT42 at full part spacing; the plate was squeezed to 0.2 spacing with a
part 0.14 from the edge. Parts whose straight edges face each other one
kerf apart are cut on the same centerline, saving the spacing along each
shared edge.
Plate.CommonLines holds groups of parts and the kerf they were joined
at. Shared spans are derived from the placed clean perimeters, never
stored, so a moved member breaks its group instead of leaving a stale
span. Plate > Arrange > Join Common Line slides the selected parts
together at the plate's kerf; Remove Common Line ungroups them. The
plate draws shared spans as a dashed centerline.
Both spacing checks hold group members to the kerf instead of the part
spacing, and a new pre-post Common lines check reports broken groups, a
changed kerf, and leads that run into a partner. Groups persist as part
positions in an optional commonLines array that older readers ignore.
This first slice still cuts every shared edge twice; single-pass cutting
through Plan Cutting and the posts comes next.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5