Slice 3 of common-line cutting. On costly plate (N26-295: 3/16 RA310S at about
$2,500 a sheet) pairing parts one kerf apart fits the part the spacing cannot:
the last plate's 38 parts fit on one 48x120 with Auto Nest only with pairs.
- Drawing Properties gains "Allow common line" (Drawing.AllowCommonLine, off by
default because customer edge-quality needs vary). The nest's CommonLineUsage
(Off / When it adds parts / Whenever available) is set in Auto Nest and seeded
from Tools > Nest Defaults; both persist (nest.json, defaults.json).
- NestPipeline runs the ordinary solve, then, with a level on, trials where
eligible parts are offered as kerf-gap pair compounds. Placed pairs expand into
parts plus explicit NestJobCommonLine groups, are validated again, and
CommonLineRanking keeps a trial only by the level: count first, then sheets;
"when it adds parts" keeps the plain layout on a tie, "whenever" also takes a
shorter cut or less material, never at the cost of a part. Engines, FillScore
and their comparers are unchanged; Off asks the engine exactly what it did.
- NestLayoutCheck exempts members only through a sheet's explicit group list and
only when the job allows common lines; materializing and committing create
Plate.CommonLines.
- Server nesting writes common-line jobs as version 3 and replays the recorded
trial answers, so the desktop binds the same groups.
- Fill Area honors the level through a PlateFillService overload.
- The benchmark gains --common-lines <level> --kerf <k>.
Benchmark (synthetic nests + N26-295, --parallel 1): with no flag and with
--common-lines off every engine matches the base commit; with a level on no
layout becomes invalid and three runs save a sheet at equal nested area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A clamp rail can now carry its own Clearance, the gap parts keep from
every clamp footprint, independent of part spacing. Unset, it keeps the
sheet's bottom edge spacing as before. Clamp blocks drawn under the
sheet can use close to zero so the laser only stays off them.
Plate.ClampClearance and NestPlateStock.ClampClearance resolve it once;
the engines, interactive fill/pack/push, the layout check, Expander walls
and automatic cut-off placement all read it. The interactive push now
holds clamps at their square clearance keep-out (the layout check's
shape) instead of the part spacing, so parts no longer tuck into its
corners; the clamped fill characterization digests are re-pinned after
checking the new layouts validate.
Persisted as an optional `clearance` on the .nest clamp rail and the
machine clamp settings; edited in Nest > Clamps and the machine's
Clamps tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NestPlateStock carries the outline; its usable material (less obstacles,
eroded by the largest edge spacing) becomes the FrontierPacker's
PackBoundary. The layout check and the runner's candidate validation
reject a part outside the outline or over an obstacle, area-based cost
and the area budget use the material area, salvage credits nothing, and
Rectangles, Circles, FlatBar and the fill strategies place nothing on it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
NestPlateStock takes an optional clamp-zone list, translated into the
placement frame exactly like WorkArea (quadrants 1-4) and detached from
caller boxes; empty input keeps stock bit-identical to before. Plate
mappings (DrawingJobMapper.FromPlate/CreatePlate, NestStockBuilder) map
zones across; materialized plates carry them for checking.
NestJobValidator rejects zones outside the sheet or duplicate ids.
RepeatedPlateGrouping and NestLayoutCheck treat clamp sets as stock
identity (C8), and the layout checker flags part material inside a zone
inflated by bottom-edge spacing with the shared spacing slack (C1/C5) -
no tolerance loosened.
ajandClaude Opus 5.5