The part cut first no longer makes a separate uncompensated centerline
cut with its own lead-in and lead-out, then re-pierces for its
remainder. It cuts its outside compensated, which puts its shared edge
on the kerf centerline, starting on the common line: a straight lead-in
from the scrap along the shared edge, then the line and on round its
perimeter with no lead-out. A member with spans already cut stops in
that kerf and cuts its last stretch from it, ending beside the part it
is cut before. Partners still cut only their remainders.
Replay's tabbed-ring accounting now accepts pieces that tile each span
exactly once, and the pre-post review counts a span as cut by a
member's compensated edge (or an older centerline cut).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Straight spans of one pair that meet at a corner chain into one shared
path (CommonLineGeometry.Paths). Plan Cutting cuts it as one open
centerline cut through its corners, pierced and left in scrap along its
end legs; each member's spans run on to its own vertex at a corner, so
the path is one tab run. Join Common Line slides along the main edge so
the step of a Z or L also lands one kerf apart, and the plate draws the
path through its corners.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
N26-295's PT42 pairs saved spacing in slice 1 but every shared edge was
still cut twice, costing a pass per edge and risking a freed part
tipping under the head on the second pass.
Plan Cutting now cuts a plate's common lines once unless the plate is set
to cut them twice. Each group is cut member by member, owner before
partner (a captured dependency that search and replay enforce, so a kept
order cutting the partner first is a constraint conflict): the member's
holes, then the shared cuts it owns as open CommonLine centerline cuts
entered through the notch on the span's axis, then its remainder pieces,
each ramped in from the kerf the shared cut opened. Capture marks the
shared spans as tabs on the owned clean copy, so replay's contour
accounting proves each perimeter is cut exactly once; a lead that fits
at neither end refuses as UnsupportedGeometry naming the span, never
shortened. Material still comes from the drawing, so utilization,
quantity and overlap results do not change. Members are never
support-tabbed; locked or excluded members and broken groups refuse.
The CI Fiber post writes shared cuts in the cut-off form with a lead-in
and no G41/G42, and remainders in the contour form on their perimeter's
compensation side, named by a remainder comment. Cincinnati CL (whose
PreApplied mode offsets nothing) and Gravograph refuse such nests, as do
the desktop and console for any post without ICommonLinePostProcessor;
nothing falls back to a silent double cut. Plate > Arrange > Cut Common
Lines Twice keeps slice 1's behavior, persists with the plate and makes
an open plan stale.
Pre-post review now checks each span is cut once, on its centerline, by
the member cut first, and the rapid check treats a finished member's
remainders as an obstacle. Compensation start in void and cancel in
kerf are unconfirmed on the CI FIBER 4020; release waits on a 3/16
stainless coupon trial.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5