Tabs suit thin plate, but on anything thicker than 0.25 in the parts
are too hard to break out of the sheet, and the Cutting Parameters
dialog was one global set for every job. Its settings now live on the
nest's machine thickness: leads on the existing Outside/Inside Cuts
tabs, and lead-in angle rounding, tabs and pierce on a new Tabs &
Pierce tab (ThicknessConfig.Cutting). In Database mode every
workstation gets the same settings through the shared machine.
The dialog and the Place Lead-in panel say what they edit, and save
back to that thickness (MachineCuttingDefaults.WriteTo, converted to
the machine's units). A thickness with no Tabs & Pierce of its own, or
a nest the machine has no thickness for, keeps this PC's settings as
before. If the machine can't be saved (server offline, a conflict),
the edit is kept on this PC for that job and the user is told.
Machine Configuration can copy one thickness's Tabs & Pierce to
thinner or thicker ones, so the 0.25 in rule takes a few clicks.
An older desktop saving a shared machine would silently erase these
settings, since it doesn't know them. Machine configuration classes
now keep unknown fields, and the server refuses a machine save that
leaves out a field the stored machine has a value for, telling the
user to update OpenNest.
The Plan Cutting status line now reports tabs from SupportTabs; since
"Tab every part" was retired it always said off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Slats are strips of a set thickness running the full length or width of
the table, one every pitch. A part's contacts are the corners of where its
material crosses a slat, so the support check and support tabs work as on
the grid. Nest > Support Bed... picks grid or slats; nest files store
type "slats" and support-grid.json keeps both layouts' values. Draw
Support shows the slats cut off to the sheet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Roslyn duplicate scans found the same code copied across layers:
- Data: the three browse sessions share BrowseSession<TPage, TSort>;
the remote clients share NestServerHttp (JSON options, If-Match,
error text).
- WinForms: five paged lists share BrowsePager for loading text,
navigation, sort glyphs and failure messages. The Add Drawings to
Release, Drawing Library and set browser dialogs now dispose their
browse sessions.
- Server: NestQueryRequest reuses DrawingLibraryRequest's helpers;
revision history queries share count and paging binds.
- Engine: RemnantPlateNester delegates to DefaultPlateNester;
CuttingPlanService reuses JointCuttingPlanSearch.Map.
- Core: LineArc and CleanHole lead-ins share LineArcApproach with
unchanged arithmetic order, so output is bit-identical.
- IO: Dxf.GetGeometry overloads share one reader; .nest JSON test
helpers move to NestArchiveJson.
Also fixes the production compiler warnings (CS8632, CS8603, CS0108)
and moves a test off an obsolete forwarding API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model the machine's support bed as a grid of contact points measured
from the plate origin, and check each part's center of gravity against
the convex hull of the grid points under its material. The bed is
extensible so straight and CAD-imported curved slats can follow.
- Core: SupportBed/SupportGrid, SupportMaterial and SupportAnalyzer
(margin with registration tolerance, best single tab point)
- Nest-wide support bed that every plate follows, saved in
plateDefaults.supportBed; machine defaults in support-grid.json
- CuttingParameters.SupportTabs: Plan Cutting tabs only unsupported
parts and limits their perimeter entries to points where the tab
steadies the part, falling back to any fitting entry
- Desktop: Nest > Support Grid..., View > Draw Support overlay and a
"Tab parts the support grid cannot hold level" tab option
- docs/support-tabs.md, nest file format and planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5