Every whole-job engine chooses among the offered stock sizes, and on the
synthetic benchmark nests Default matched or beat StockLadder on all 18
runs (saved sizes, a six-size pool, with and without salvage credit),
costing 30-40% less in total with mixed sizes. Its sheet-swap step never
produced a win over Irregular's tail re-plan.
The registry maps "StockLadder" to Default so saved selections, scripts
and API requests keep working. OrderedPlateNester stays: Fill and the
remnant strategies use it for restricted rotations, and its golden layout
is now pinned through NestJobRunner with the parts requested largest
first, as StockLadder requested them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An acceptance rule may list sheet grades first, so at plate thickness its
best match can be rank 3 (A36 for HR). Auto Nest marked every row above
rank 1 a substitute; it now ranks rows against the best rule rank ML
matched at the nest's thickness, as ML labels them, so A36 is preferred
and only A572 is a substitute.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MaterialLedger's /api/stock/opennest now resolves an OpenNest material
and grade through ranked acceptance rules. The client reads the new
spec rank, family, grade and finish and the item rank; an older ledger
that sends none of them deserializes as rank 1 with no label.
LedgerStockMapper groups drops only by identical size and spec, keeps
the ledger's order in rows and in each row's ItemCodes, and orders rows
by rank. Auto Nest's Source column shows the row's grade and finish
("A1011 P&O"); substitutes (rank above 1) read "A1011 P&O for HR" in
amber, name the substitution in their tooltip and still load ticked.
The engine still sees no rank.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Server nests in Database mode get a read-only status bar label comparing their
open MaterialLedger holds with the sheets they cut, e.g. "Ledger: 2 of 4 held,
2 short". Nothing writes to the ledger and nothing waits on it.
- MaterialLedgerClient.GetHoldsAsync reads GET /api/stock/holds?openNestNestId=
with the closed LedgerHoldsResult set; unknown status strings are kept. The
request plumbing is shared with GetStockAsync.
- LedgerHoldSummary (OpenNest.Data) counts Proposed/Approved/Released/
AwaitingCloseout holds against the plate quantities, skipping the trailing
empty plate as /sheets does.
- NestHoldStatus refreshes on server open, after save, after storage or
Options changes and on label click; it never polls. The tooltip lists holds
in nest units. File-mode, unsaved and ledger-less nests show nothing.
- Setting Has Been Cut in Nest Info with holds still open shows a non-modal
note linking to {ledgerUrl}/Nests/{id}. Posting is not gated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest on MaterialLedger stock now records which inventory item each
physical sheet uses, so ML can hold exactly those items instead of matching
by size.
- Core: Plate.StockItemCodes (entry i = sheet i of Quantity; empty = uncoded).
Core invalidates it: a resize clears it (turning the sheet keeps it), a lower
Quantity truncates it, a nest material/grade/thickness change clears every
plate's, ClearAll clears it and new plates never copy it.
- Desktop Auto Nest: after a kept proposal is committed, LedgerStockAssignment
deals each ledger row's codes to its plates in Nest.Plates order (bundles
repeat their code; clamp-removal variants use their base row). Rejected,
discarded or cancelled proposals never reach it. NestPipelineCommit.PairWithStock
pairs committed plates with their solved stock; the engine stays ledger-free.
- Plate list tooltip: "Stock: CODE (location)"; locations are display-only.
- nest.json: optional plate stockItemCodes, omitted when empty, read leniently.
- /api/nests/{id}/sheets: new plates[] { index, width, length, quantity,
stockItemCodes }; sheets[] unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest's Stock Options gets a Load from ledger button that reads the nest
material's free sheets and drops from MaterialLedger's API-key-protected
GET /api/stock/opennest. Ledger rows are request-local: the engine sees them as
ordinary NestPlateStock rows with ledger:{n} ids and finite quantities, and they
are never written to Nest.PlateOptions.
- OpenNest.Data/MaterialLedger: settings file, read-only client (X-Api-Key,
5 s timeout, closed LedgerStockResult set) and LedgerStockMapper (bundles and
sheets one row each, same-size drops grouped with ordered item codes, unknown
shapes and too-small items skipped, inch/mm conversion).
- Options: MaterialLedger URL and API key (DPAPI, CurrentUser) with Test.
- Auto Nest grid: Use, Qty and Source columns for every row; PlateOption gains
request-local Quantity and Id, which NestStockBuilder passes to the engine.
Ledger rows score by area; hand-typed costs stay saved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without salvage credit (desktop Auto Nest on a single plate size) every
complete one-sheet layout costs the same, so engines kept whichever layout
came first. N26-23S nested 27.86" long when turning two parts fits it in
21.3".
NestJobCost.CompactnessOffcut measures the largest full-width/full-length
edge offcut as salvage does, whatever the salvage rate. Default and Circles
(CandidateScore), Rectangles and Circles sheet choice (SheetByStock) and
Irregular sheet and plan ranking use it only after cost, so no cost changes.
Sheet-level keys round to 1e-6 to keep ties platform-independent.
Rectangles layout digests are re-captured: each changed fixture keeps its
sheets, parts and cost and leaves a larger offcut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Remove a private part reference from the lead-in notes, fix the Options and
New menu paths, say that release ZIPs never auto-update, describe current
Cincinnati CL ordering, clamp validation coverage and empty-plate saving,
list every built-in engine, and drop internal decision labels.
Clamps could only sit on the origin-side edge and be edited as a list in
Nest > Clamps. Setting them up against a real sheet is easier by dragging
them where they are, so Plate > Edit Clamps adds an edit mode: drag a clamp
along its edge or onto another edge, click near an edge to add one, click a
clamp's locating dimension to type its distance from the origin, Delete to
remove. Dimensions measure to the clamp center or its near edge
(remembered per user). Edits replace the nest's rail so every sheet follows,
like the dialog.
Rail clamps now carry a ClampEdge (origin side, far side, origin end, far
end), positioned from the origin along that edge. Origin-side clamps keep
their ids and files; other edges persist in optional per-edge arrays in
.nest files and clamps.json, omitted when empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Desktop Auto Nest's "Best plan so far" strip now fills in for every built-in
whole-job engine except FlatBar, not only Irregular.
- Rectangles makes one sheet-by-sheet run, so it reports the finished job as
its one plan, then replays its plate commits (token checked as before).
- Circles reports when a stock-preference run or a tail re-plan beats its
best result so far.
- Default scores each candidate plan as it ranks results (valid, fewest
unplaced, lowest cost, candidate order) and reports it only when it beats
every plan already shown, so a later candidate never shows a worse plan.
The chosen result is always the last plan reported.
- Shared ReportPlan/SameLayout helpers on CandidateProgress; Irregular uses
them too. Reporting never changes the search.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest no longer draws parts on the plate view before they are kept:
its result is a set of sheets, possibly of several sizes, not parts on the
current plate. Ghost parts stay with interactive Fill and remnant tools.
- NestJobStage.PlanImproved carries an engine's best whole-job plan so far;
Irregular reports one whenever a variant or the tail re-plan beats it.
- NestPipeline adds PlanSheets: the plan on detached drawings built from
the job geometry (with the caller's names and colors), so previews never
touch caller drawings or quantities.
- SheetStripControl draws every sheet side by side at one scale, repeats
once with their count, captioned with size, parts and utilization.
- The progress window shows "Best plan so far"; a review window shows the
final sheets, totals, cost summary and unplaced parts before commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
--autonest can now use more than one physical sheet. The first layout
replaces the target plate's parts, further layouts are inserted as new
plates after it, and --stock offers explicit sheet sizes (with optional
costs) built from the target's spacing, quadrant and clamp rail.
NestPipelineCommit gains ApplyToPlates for callers without a
PlateManager. Per-sheet results and overlap checks cover every
committed plate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Interactive Fill on a plate with clamps used to split the plate into
clamp-free rectangles and fill each one separately. It showed no progress,
so Accept did nothing until the end, and Stop discarded the result. Packing
around the clamps also tends to give a worse layout than losing the few
parts that land on them.
FillItem and FillGroup now fill the area as if there were no clamps. They
then drop each part that enters a clamp keep-out or sits too close to an
existing part, using the same check as before. For a multi-part group, the
whole copy is dropped when any member fails. Progress previews are filtered
by the same check, so a layout accepted early is clamp-clear. A quantity
request that loses copies asks for that many more, up to two more times.
Pack and whole-plate Nest still pack only into the clamp-free areas.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NestPipelineResult.Unplaced lists each requirement's unplaced copies with a
typed NestUnplacedReason, counted from the returned placements: no stock fits
at the sampled rotations, reserved in a cutout of an unplaced frame, stock
exhausted, plate limit, no position found, or proposal not keepable. Desktop
Auto Nest, Console --autonest and MCP autonest_plate/autonest_job report them;
the API returns NestResponse.Unplaced, persisted from response schema 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NestPipeline.Run now bundles parts that fit other parts' enclosed cutouts
into their frames before the selected engine, for desktop, Console, MCP and
API alike. A valid complete bundled trial is kept; a refused trial falls back
to the ordinary solve (reason on RefusedCutoutTrial), and an incomplete trial
is compared with it, keeping whichever valid proposal places more. An
incomplete but valid trial is now keepable like any incomplete result.
Expanded sheets list each frame's inserts before the frame, so the committed
order cuts every insert before the cutout that releases its slug.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators sometimes pull a clamp for a manual layout, but only Auto Nest's
last-resort search could take clamps off a sheet. Right-clicking a clamp in
Select mode now offers to remove it from that sheet or put it back, reusing
the existing per-sheet RemovedClamps, so the zones, cut-time charge, display
and .nest persistence all behave as they do for Auto Nest removals.
The change is refused while a nest run or fill may be reading the clamps,
sharing the guard the Clamps dialog already used.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Recovery only tried contiguous runs of clamps, so a part with a notch over
a middle clamp had all three clamps removed although the two outer ones
were enough (D8: 'the fewest clamps that let it fit'). One probe per clamp
now finds the clamps every removal must include (a part that cannot fit with
only that clamp left needs it off; removal is monotone), and the search
tries every set by size, mandatory clamps plus the optional ones nearest the
origin first. Full-sheet parts resolve with one probe per clamp.
PM 3df03af2-35a6-49c2-9082-fc6208f5b708
automatic-nesting.md still said interactive fill/push, the overlap check and
cutoffs ignore clamps, and nesting-engines.md listed the large-spacing and
tiny-zone defects fixed in this slice. Both now describe current behaviour,
and the new last-resort removal section states its limits (1000-probe budget,
sub-grid clearance) as settled with the user (plan D12-D15).
A clamp is an avoidance area, so a clamp that only partly reaches a
sheet (for example centered at 60.5" on a 60" sheet, or near the
origin) now keeps its whole 1.5" x 0.625" footprint instead of being
clipped to the sheet; clamps wholly beyond the sheet are still left
off. Job validation accepts a zone that hangs past the sheet edges and
still rejects one that does not reach the sheet at all. Both packing
lanes already block keep-outs extending past the bin; a hanging-clamp
solve through Rectangles, Irregular and Default keeps every part clear
of the whole inflated footprint.
User decision 2026-10-12, settling the plan's pending D2 question.
New and BOM import give a new nest the machine clamp rail from
clamps.json when it is enabled, converted to the nest's units; with the
default (off) settings nests are created exactly as before. An
unreadable or partly invalid settings file warns once per session.
Nest > Clamps... edits the current nest's rail: clamp width and depth
and a sorted list of X centers with Add/Remove. OK applies the rail to
every plate (Cancel discards the edits); Load Machine Defaults only
fills the dialog; Save as Machine Defaults writes clamps.json at once
and is labelled as not undone by Cancel. The dialog refuses to open
while nesting or a plate action runs. Its decisions live in the
Linux-tested ClampRailEditor; the form only renders and forwards input.
PlateView draws clamp zones as translucent hatched amber rectangles
over the sheet and parts and repaints when they change. They take part
in no hit test, selection or sequencing.
The engine argument's description now names every built-in engine with what
it suits, so a model can choose one; omitting it still means Default. The fill
tools resolve an omitted strategy to Fill directly instead of through the
session's whole-job default. Front-end tests cover the MCP and console
defaults and keep the description in step with the registry's built-ins.
Default is the engine every front end uses when none is named. It now runs
Irregular, then Rectangles, checks both layouts with NestLayoutCheck and keeps
the best: valid first, then fewest unplaced parts, then lowest salvage-credited
cost; ties keep Irregular. A candidate that throws or returns nothing is
skipped, cancellation stops the search, and only the chosen layout's plate
commits are reported. Neither engine wins every job in the lane benchmarks,
and Rectangles adds little time while also covering Irregular's invalid
layouts.
The registry lists Default first and no longer maps the name to Fill; fill
strategy callers still read Default as Fill. A future circle/ring engine joins
as another candidate.
Desktop Auto Nest, Console --autonest, MCP autonest_plate and the API
NestRunner all run through NestPipeline, so nothing calls the old
orchestration any more.
Delete MultiPlateNester (with MultiPlateNestOptions, MultiPlateResult,
PlateResult, PartClass and PartSortOrder), PlateOptimizer and
PlateOptimizerResult, plus their tests. The explicit-strategy contract
those tests checked now lives at PlateFillService.ResolveStrategy, which
keeps its null-means-Default, canonical-name and unknown-name tests.
CreateFiller loses its internal visibility, which only the deleted
orchestrators used.
This breaks source and binary compatibility for external callers of the
removed types; whole-job callers use NestPipeline.Run or INestingEngine.
Adds docs/nesting-engines.md: which engine suits which jobs, the old plug-in
names the registry maps, retired engines, and the rule that an engine change
lands only when it beats that engine's current benchmark result with every
layout valid. README, release and automatic-nesting docs drop the bundled
plug-in wording; AGENTS.md now places built-in engines in
OpenNest.Engine/NestingEngines and keeps only external plug-ins out of the
solution.
ajandClaude Opus 5.5