Server nests in Database mode get a read-only status bar label comparing their
open MaterialLedger holds with the sheets they cut, e.g. "Ledger: 2 of 4 held,
2 short". Nothing writes to the ledger and nothing waits on it.
- MaterialLedgerClient.GetHoldsAsync reads GET /api/stock/holds?openNestNestId=
with the closed LedgerHoldsResult set; unknown status strings are kept. The
request plumbing is shared with GetStockAsync.
- LedgerHoldSummary (OpenNest.Data) counts Proposed/Approved/Released/
AwaitingCloseout holds against the plate quantities, skipping the trailing
empty plate as /sheets does.
- NestHoldStatus refreshes on server open, after save, after storage or
Options changes and on label click; it never polls. The tooltip lists holds
in nest units. File-mode, unsaved and ledger-less nests show nothing.
- Setting Has Been Cut in Nest Info with holds still open shows a non-modal
note linking to {ledgerUrl}/Nests/{id}. Posting is not gated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Core PlateRemnant.Expected picks a full-span cut-off drop clear of the
parts (less kerf, nominal position for head-locked overcuts), else the
largest salvage edge offcut, else none below the nest's new persisted
MinimumRemnantDimension. NestJobCost's salvage offcut now calls the Core
rule unchanged. NestWriter writes a derived plate expectedRemnant that
readers skip, and /sheets reports it per plate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto Nest on MaterialLedger stock now records which inventory item each
physical sheet uses, so ML can hold exactly those items instead of matching
by size.
- Core: Plate.StockItemCodes (entry i = sheet i of Quantity; empty = uncoded).
Core invalidates it: a resize clears it (turning the sheet keeps it), a lower
Quantity truncates it, a nest material/grade/thickness change clears every
plate's, ClearAll clears it and new plates never copy it.
- Desktop Auto Nest: after a kept proposal is committed, LedgerStockAssignment
deals each ledger row's codes to its plates in Nest.Plates order (bundles
repeat their code; clamp-removal variants use their base row). Rejected,
discarded or cancelled proposals never reach it. NestPipelineCommit.PairWithStock
pairs committed plates with their solved stock; the engine stays ledger-free.
- Plate list tooltip: "Stock: CODE (location)"; locations are display-only.
- nest.json: optional plate stockItemCodes, omitted when empty, read leniently.
- /api/nests/{id}/sheets: new plates[] { index, width, length, quantity,
stockItemCodes }; sheets[] unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Nest after release ticked, Make Nests now minimizes the Drawing
Sets window and nests each group's built nest in its own main-window
tab, before it is saved, with Auto Nest's progress window and live plan
strip, one nest at a time in plan order. Stop there (or switching tabs)
stops the whole release, as the panel's Stop does; the layout is kept
by the same rules as the headless renest, without the Keep review.
After upload each tab is bound to its saved record instead of a second
tab opening; a tab whose nest was not saved is closed. The main window
stays in front, and the Drawing Sets window flashes its taskbar button
when a group failed or was refused or the release was not recorded.
NestRenest splits into CreateRequest and Keep so the solve runs off the
UI thread and the commit on it; AutoNestCommand's solve-with-progress
step is shared rather than copied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The modal release dialog is replaced by ReleasePanel, docked beside the
Library and Sets tabs and shared by both. A double-click or Enter adds a
set at one kit or a library drawing on its own at the entered quantity;
adding one already listed adds to its quantity. Lines are edited in
place with a remove button, and the nests it will make preview live.
Each group now merges into a matching Draft nest by default: the only
one, or the most recently saved of several (chosen in the row); a draft
open in a tab blocks Make Nests instead of making a parallel nest.
Nest after release is remembered per user. Edit Set and Edit Drawing
move to their buttons and right-click menus.
The Drawing Sets window is now an unowned top-level window with its own
taskbar entry and remembered bounds, closed with the main window; a
release not yet made survives closing it, and Make Nests brings the
main window forward. ReleaseSetForm remains as a thin dialog host for
releasing from Nest > Add from Drawing Library.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing library browser becomes DrawingLibraryView, a control. The Drawing
Sets window hosts it as its Library tab beside Sets and Releases, and File >
Drawing Library opens the window on it. A library drawing's Releases item
switches to the Releases tab filtered to it. Nest > Add from Drawing Library
stays a dialog, now a thin wrapper around the same view.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Drawing Sets > More > Import BOM reads a BOM and its drawing folder,
matches each drawing to the library by its D4 identity and geometry
(reuse, new revision, or new drawing) and opens the set editor with a
new set prefilled with the BOM quantities. Reading only queries the
library; Create Set lists the uploads and revisions and asks before
storing them, and the set is stored only by the editor's Save.
Parts with no material or thickness still import and are flagged for
Edit Drawing. DrawingPackage.GeometryKey compares geometry independent
of the fresh entity ids each DXF import assigns. In Database mode File >
Import BOM opens this flow instead of creating nests directly; File mode
is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The set browser's six equal buttons become New Set..., Edit..., More and a
bold Make Nests.... Archive/Restore, History... and Releases... move into a
menu that the More button drops down and that is also the set list's
right-click menu (menu key and Shift+F10 open it; right-click selects the
row first). Access keys: &New Set, &Edit, M&ore, &Make Nests; the menu has
&Archive/&Restore, &History, Re&leases. Enabled rules are unchanged; More is
enabled while any of its items is. The picker hides More and has no menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The member grid shows one Material column (name, grade, thickness and
units, such as "Steel A36 0.25 in"), Qty and Note; Cut type appears only
when the set mixes cut types. Move Up/Down are gone: member order only
breaks ties (materials are grouped and sorted on release, nests list
drawings by name), and the stored order is kept as it was. The dialog
opens at 1040 px instead of 1264, with the library pane unchanged and
still resizable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing sets window now has two tabs. Releases hosts the release list
(paging, nests, Undo Release, New Release) as a SetReleasesView control that
replaces SetReleasesForm. File > Releases stays as a shortcut that opens the
window on that tab. A set's Releases (Sets tab) and a library drawing's
Releases (Drawing Library) open the tab filtered to it, with the filter shown
above the list and Clear Filter to list every release. Releases re-reads its
page whenever the tab is shown again, so a release made on Sets appears.
The set editor gets History... for a saved set; the Sets tab keeps its
History button until the browser's buttons are rearranged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release dialog now reads as a sentence ("Release set 'X' ×N") and
previews what Make Nests will do ("Creates 2 nests: ..."), with refused
materials counted and Fix Drawings reachable without selecting them.
An Options toggle holds the Release ticks, the Nest column and Include
archived drawings; collapsed, an option stays shown while it differs
from its default, and the Nest column shows whenever a Draft nest could
be merged into. Defaults, release, undo and retry are unchanged. The
Status column wraps so refusals are not cut off, and the retry status
reads "... Try Again records it; the nests are not made again."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Wording only, no behavior change: "kit" becomes "set" or "Quantity",
the release button reads Make Nests... (Try Again after a failed
record), the releases list shows Material and Action, and the release
dialog's status lines are shorter. Help in docs/nest-storage.md follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds on the library's Edit Drawing (details as a new revision):
- warns before saving details that would duplicate another active library
drawing (D4), naming them; a failed lookup also asks;
- File > Drawing Library, a nest-less mode of the library browser that lists
every active drawing and edits on double-click;
- the set editor's member grid (double-click, right-click, button);
- the release dialog: Fix Drawings on a group refused for missing material or
thickness or duplicate names, so those refusals are no longer a dead end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit Settings becomes Edit Drawing: name, customer, material, grade,
thickness and cut type are editable beside the nesting settings and
notes. Units stay read-only. The save is a metadata revision with the
same package, so nests keep the revision they hold, and the release
refusal for drawings without material or thickness now has a fix.
No verified server image has been published yet, so the shop server runs
development builds. Building on the host meant cloning there and hand-editing
compose; the script builds with the local Docker engine, ships the image,
backs up the data volume and waits for the health check, printing what a
rollback across a schema upgrade needs. docs/nest-storage.md describes it
beside the Compose deployment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GET /api/nests/{id}/sheets reads the stored archive's nest.json and returns
the sheet sizes it needs (grouped, width the shorter side, quantities summed)
and each drawing's required and nested counts, skipping the trailing empty
plate as plateCount does. MaterialLedger builds material holds from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release dialog's Add a set box was a pure type-ahead: it queried the
server only after typing paused, so opening it, or clicking its arrow with
nothing typed, showed an empty list. From Drawing Sets > Release that was
easy to miss, but New Release starts with nothing listed, and an empty
dropdown there reads as a missing server connection. The dialog now reads
the first active sets by name when it is shown, and again when the list is
opened while still empty, without dropping the list open on its own; typing
narrows it as before.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Releases could only be reached through one set or one library drawing, so
seeing what the shop released lately meant knowing which set to open first.
File > Releases shows every release on the server, newest first, naming what
each one had ("Kit A ×2, Kit B; Bracket ×4") in place of the per-set
revision and kits, with the same nest list and Undo Release. New Release
opens the release dialog empty, so a release can start from the list rather
than from a set; the plan builder now accepts no lines as an empty plan,
and the dialog's Release button stays disabled until a group is listed.
The list re-reads from the newest page once the dialog records a release.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
After adding library drawings the operator had to close the dialog to see what
the nest now needed, and fixing a quantity meant leaving it for Edit Drawing
one part at a time. The new In This Nest tab lists the nest's drawings (cutoffs
excluded) with their library revision and required, nested and remaining
quantities, refreshes after each add, and edits Required in place.
An edit applies to the nest immediately, like an add, and the nest window
refreshes its drawing list when the dialog closes. Out-of-range values are
refused both when the cell is validated and when they are applied, because
DataGridView only validates on leaving the cell and EndEdit commits without it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Release dialog lists sets and drawings in one grid (with a type
column; Kits / Qty is a set's kits or a drawing's quantity, up to
100,000). Add Drawings... browses the library as the set editor's pane
does and stays open for several adds; listed drawings are greyed and
skipped, archived ones refused. The Drawings tab gains Release... (when
opened from a nest) to start a release from one drawing, and
Releases... so a release of drawings alone can still be found and
undone, since it belongs to no set's history.
docs/nest-storage.md describes the desktop flow, the `drawings` wire
field, null item setId, the drawingId query/probe and schema v11.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Releasing a set creates new nests or merges into draft ones, so tying the
set browser to the Drawing Library dialog (which needs an open nest) put it
behind a document it never uses. File > Drawing Sets... (Database mode)
now opens a standalone window with the set browser and Release, opening
released nests in their own tabs. The library dialog loses its Sets tab
but keeps Used in Sets and Add to Set on a drawing's menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The library browser showed only a grid and a notes box, so picking the right
part meant reading names and guessing at the shape, and the add controls sat in
a crowded row with the pager. The Drawings tab now splits into the list (with
its pager underneath) and a details pane: a geometry preview, the drawing's
name, customer, material, thickness, cutting and revision, its notes, and the
quantity with a prominent Add to Nest button.
The preview downloads the listed revision's package after the selection settles
for 150 ms, shares a request already loading that revision, and caches drawings
per revision for the dialog's lifetime. It colors the drawing from the record's
settings without advancing the nest's part palette. It is best-effort: any
failure shows "Preview unavailable" and the dialog keeps working, and the UI
update is marshalled explicitly because an STA thread without a WinForms
synchronization context resumes the await on the thread pool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nests, drawings and releases store material and grade as free text, so
there was no canonical list for clients to suggest from or to fix
spelling against. Schema v10 adds materials and material_grades keyed by
SharedListNames.Key, with GET/POST /api/materials. Adding is idempotent
by key and keeps the first spelling.
The tables start empty: the materials already stored did not import
cleanly, so the list is filled through the API instead. Existing
free-text columns are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A release now ends in nests ready to cut rather than empty drafts, and a
merge no longer leaves the draft it cleared waiting for someone to run Auto
Nest. "Nest after release" (on by default) runs Auto Nest headless on every
released group, new or merged, before anything is uploaded.
NestRenest removes every plate and nests each drawing's required quantity
onto sheets from the nest's plate defaults and plate-size options. It keeps
a layout only when it is valid and keepable, so an invalid result never
reaches the server; the nest is saved without sheets and the operator is
told to run Auto Nest. Unplaced copies stay as remaining quantity, and the
status column lists sheets, utilization and what did not fit. A new Nesting
progress stage reports each group, and cancelling while nesting saves
nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release dialog now lists the sets to release instead of one set with a
multiplier. More are added by typing a name (the matching active sets fill
the list as you type) and each set has its own kit count. Its groups span
all the sets, and each group can make a new Draft nest or merge into a Draft
nest of the same material, grade and thickness, listed with its sheet count.
The status column says that a merge discards the draft's layout and that
Undo Release restores it.
A draft open in a tab of this desktop is refused, because nest tabs do not
track unsaved edits and the merge would leave them behind. The main window
tells the dialog which server nests are open.
The release history shows what each release did to each nest (created, or
merged from one revision to another, and what undo did) and gains Undo
Release. When nests changed after the release, it names them and offers to
undo the others, leaving those as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release plan now takes several sets, each with its own kit count. A
drawing listed by more than one set becomes one item with the quantities
summed and each set's share kept, so the release can record what every kit
put into every nest. FindDraftsAsync lists the Draft nests of a group's
material through the new nest query filters.
The session can merge a group into a chosen draft instead of making a new
nest. It downloads the draft at the revision it was chosen at, refuses it
unless it is still a Draft of the group's material, thickness, units and cut
type, adds the items, and removes every plate so the whole demand is nested
again. The save is guarded by that revision, so a draft someone saved
meanwhile fails its group instead of being overwritten. An optional renest
step, run before anything is uploaded, will back "Nest after release"; if it
throws, the nest is still released without a layout.
The release record now carries every set line, merged nests with their
revisions before and after, and each set's drawing quantities.
SetReleaseText.UndoRefusal words a refused undo for the release history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A release that merges into an existing draft needs the drafts of the same
material group. The nest query can now filter exactly on status, material,
grade and thickness. Material and grade compare like the shared material
lists (case and spacing ignored) through a SQLite function, so no key columns
or backfill are needed; a blank grade asks for nests without one, and
thickness matches at the four decimals drawings are stored with.
The client sends the filters only when set, so plain browsing keeps working
against servers that do not know them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A release can now cover several sets, each with its own kit count, so parts
from different kits share sheets. It can also merge into an existing draft
nest instead of always creating one. Schema v9 replaces the single-set
release tables: releases, their set lines, their nests (created or merged,
with the nest revision before and after) and the drawing quantities each set
added to each nest, so a kit stays traceable once kits share a nest. The v8
migration turns each existing release into one set line with created nests.
Undo runs on the server in one transaction: created nests are soft-deleted
and merged nests restored to their pre-merge revision, but only while each
still holds what the release wrote. Otherwise nothing changes and the
changed nests are listed, so the operator can skip them. A nest restored to
that revision counts as unchanged, which lets releases sharing a nest be
undone newest first.
The old /api/sets/{id}/releases and /api/nests/{id}/release routes are
replaced by /api/releases; no tagged desktop used them. The desktop still
releases one set at a time until the release dialog is reworked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adding drawings to a set meant opening the library dialog, then the set
editor, then a second copy of the library in pick mode, then backing out
again. The set editor now has the library as its left pane (unfiltered,
searchable, sortable, paged): select drawings and Add to Set, double-click
or press Enter. Members already in the set are greyed. The library
dialog's pick mode had no other caller and is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The server stored whatever plate count, part count, material and
thickness the client claimed, so a record could disagree with its own
archive, and a bulk importer had to read each written .nest back in full
just to describe it (about a quarter of the PEP archive import's time).
Uploads (POST and PUT /file) now read only the archive's nest.json -
never programs or geometry, and without referencing OpenNest.IO - and
overwrite those fields, following NestReader's fallbacks for thickness,
material, parts with a missing drawing and the trailing new-plate slot.
A file without a readable nest.json is 400 and stores nothing, so the
server can guarantee the record describes the bytes; nest.json
decompression stops at 64 MB. A metadata-only PUT keeps the stored
counts because the archive is unchanged; material and thickness stay
editable there, since the desktop applies the record's values on open.
Server tests that uploaded placeholder bytes now upload small
deterministic archives, and the container smoke's near-limit probe is a
padded real archive. New tests pin the server's values to a full
NestReader read of the same archive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nest records gain a materialGrade field (server schema v8, blank for existing
rows) that is searched, sorted and versioned like the other metadata. The
Nest Info dialog gets a grade picker listing the machine configs' grades for
the chosen material; density survives only an unchanged name and grade. A
blank recorded grade keeps the archive's grade while the name matches, so
records saved before v8 do not lose it on open. Saved Nests shows a Grade column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators often build a nest first and only then want it kept as a
reusable kit. The drawing list's new "Add Library Drawings to Set..."
takes every drawing copied from this server's library, sums copies of
one library drawing, and opens the set editor on a chosen or new set
for review and Save. Unlinked, other-server and zero-quantity drawings
are named as skipped instead of silently dropped.
Members the set already lists keep the set's quantity: a nest released
from a set carries its kit multiplier, so copying its quantities back
would scale the kit on every round trip. Members are added at the
library's latest revision (S1), with a note when the nest holds an
older one or the drawing is archived.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A set is only useful on the floor once it becomes nests. Release on the
Sets tab previews one row per material group with a kit multiplier, an
archived-drawing toggle and a tick per group, then builds each ticked
group's nest as File > New would, in the group's units, uploads it as a
Draft, opens it in its own tab bound to the server record and records the
release. Every group's outcome stays on screen, and a release whose
nests exist but whose record failed can be recorded again.
Releases shows each release's nests and how far they have got ("2 of 3
cut"), and Nest Info names the release a nest came from, so a kit run can
be followed across its nests. Plate defaults convert between inches and
millimeters so a group drawn in other units still gets sensible plates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators need to build kits from library drawings before they can be
released. The Drawing Library dialog gains a Sets tab beside Drawings,
so sets live where their drawings are browsed: list, search, archive,
restore, history, and an editor whose Add Drawings reuses the library in
a multi-select pick mode. The Drawings tab's menu shows which sets use a
drawing and adds it to a chosen or new set.
DrawingSetEditSession keeps a new set's id across a save whose reply was
lost, so a retry adopts the stored set instead of creating it twice, and
guards existing-set saves with the revision they were read at.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The desktop needs a cross-platform way to read and save sets and to turn
one into nests before any UI is built on it. RemoteDrawingSetStore covers
every /api/sets route with the library client's checks and conflict
handling. SetReleasePlan groups a set by material, grade, thickness, units
and cut type without I/O, so the release dialog can preview refusals
(duplicate names, drawings without material) before anything is created.
SetReleaseSession builds every group's nest through LibraryDrawingInsert
before uploading any, so a refusal leaves nothing on the server; uploads
then never cancel mid-flight, a lost reply is reconciled by the nest's
client-allocated id, and the release is posted only when every chosen
nest exists, with a same-id retry when that post fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Releasing a drawing set makes one nest per material group, so a kit run
spans several nests. The server now records which set revision was
released, the multiplier and the nests it made, so a run can be tracked
across its nests and a nest can say where it came from.
The client uploads every nest first and posts the release last: a failure
part-way leaves ordinary nests and no release, never a release pointing at
missing nests. For the same reason a release is accepted for an older set
revision or an archived set, since the nests already exist by then. The
release id is client-allocated and a nest belongs to at most one release,
so a retried post gets 409 with the release that already holds it.
Releases are append-only and read joined to each nest's current metadata,
so status and deletion are always current. The tables join schema v7, as
the set tables have not shipped yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A drawing set is a named list of library drawings with quantities (a kit,
an assembly, a recurring order) that will later be released into one nest
per material. This is the server half: sets get the same revision,
If-Match and archive contract as /api/drawings so the client and tests
follow a known shape.
Schema v7 adds drawing_sets, drawing_set_revisions and
drawing_set_members. Members reference drawings by id and mean each
drawing's current revision, so reads join the current drawing record:
the client can group members by material without one request per drawing,
and the joined record is ignored on save so a read record can be sent
back unchanged. Every change keeps its own member list, and
/api/drawings/{id}/sets answers "used in" from current revisions only.
The drawing query's enum, integer and history-paging parsing is now shared
so both APIs refuse bad input identically.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nests released from drawing sets need a state before Quote: created but not
yet nested or checked. Draft is appended to NestStatus (value 3) because the
server still accepts integer statuses from existing callers, so existing
numbers must not shift; NestStatuses.WorkflowOrder puts it first wherever the
operator picks a status.
Older desktops read Draft as Quote (the documented unknown-status fallback),
and an older server refuses "draft", so the server must be upgraded before
desktops that can set it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The nest name box was always read-only, so a nest could only be renamed
by Save As, which leaves the old copy behind. In Database mode Nest Info
now edits the name (uploaded with the next Save), as does the saved-nest
browser's Nest Information (saved immediately). File mode keeps it
read-only because the file name is the nest name. Renaming to a name
another active nest already has asks first, and declining reopens the
dialog with the edits kept; a duplicate accepted there is not asked about
again by the nest's first Save.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nests named offline from the per-PC counter can collide with names already
on the server. Renaming them silently is not an option because the name may
already be on posted CNC programs and labels, so the first Save of a nest to
a server now checks for an active nest with exactly the same name and, only
then, offers a freshly allocated name in an editable dialog (Cancel saves
nothing). A failed or slow check keeps the current name, as before. Save As
and pending-upload reconciliation are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > New restarted its counter every day while names only carry the
year, so the first nest of each day was always N26-223, and each PC kept
its own counter. In Database mode the nest server now hands out the
year's next number (POST /api/nest-names/next, nest_sequences table,
schema v6), staying above every stored generated name so offline or
pre-existing names are never reissued. The per-PC counter remains the
fallback when the server is unreachable or older, resets per year, and
is raised past each server allocation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- POST /api/nests with an existing id (active or deleted) now returns 409 with
the current record instead of a 500 from the UNIQUE constraint.
- Uploaded nest metadata must have string text fields and a defined status;
null fields and undefined statuses (e.g. 99) are 400 instead of a 500 or a
stored invalid value.
- --database <path> is accepted alongside --database=<path>; a missing or
repeated path fails startup instead of silently using OPENNEST_DB/default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The v4 upgrade now keeps existing library data: each distinct package
blob is stored once by hash, every revision and current row is copied
with default nesting settings, and the v4 drawing tables are dropped,
all in the migration transaction. Pre-v4 databases get the v5 tables
directly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Schema v5 stores each distinct drawing package once in drawing_packages,
keyed by SHA-256; revisions point at it, so details, settings, archive and
restore revisions add no blob. The v4 drawing tables are replaced outright
(no production library existed); nest tables are untouched.
Nesting settings (cut first, priority, rotation constraints, color) become
structured record fields (DrawingLibraryRecord.Settings), returned on every
read, filterable by cutFirst, editable through the metadata endpoint and
applied by LibraryDrawingInsert. Canonical packages now leave every
record-owned field at its default, so renaming or changing settings never
changes the package hash. Saving a nest drawing to the library carries its
settings into the record.
The desktop library browser gains a Cut first column and an Edit Settings
dialog that saves notes and settings as a new revision with the same package.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators can now save a nest drawing to the shared drawing library. Right-
click a drawing in the drawing list > Save to Drawing Library... opens a
dialog with name, customer, material (post materials suggested), grade,
thickness, cut type and notes, prefilled by the save model; units follow the
nest.
Whenever the details change, the dialog looks up library drawings with the
same details and offers Save as: the next revision of the match (the default
for one match or the linked drawing), a choice among several, or a separate
drawing. Save stays disabled until the lookup for the current details has
finished, so a choice can never apply to details it was not made for. A 409
is shown and the choices are refreshed; a save that could not be confirmed
tells the operator that saving again checks it and never stores it twice.
On success only the drawing's library link changes, and the chosen cut type
is remembered per PC. There is no nest dirty flag to set, so the operator
saves the nest to keep the new link. The item is Database mode only and is
shown only where the drawing list's host handles it (not the best-fit viewer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators can now pull shared library drawings into a nest. Nest > Add from
Drawing Library... and a Library button above the drawing list open a paged
browser (name, customer, material, grade, thickness, cut type, revision, saved)
with a notes preview and a quantity. It starts filtered to the nest's material,
grade and thickness, with Show all to lift that.
Add downloads the listed revision's immutable package, not the current one, so
a revision saved meanwhile can never be what lands in the nest. The insert is
planned first and every warning or refusal is shown before the nest changes;
the dialog is modal, so the nest cannot move between plan and apply. The dialog
stays open for further adds and the drawing list refreshes on close.
Both entries are Database mode only: the library lives on the nest server, so
in File mode they are disabled with a "Database mode only" tooltip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Proves Slice 1's contract through the production routes and the real client:
a code-built drawing is packaged, uploaded, found by cut type, material, grade
and thickness among decoys, downloaded and read back with identical program
text; a stale If-Match update raises a conflict and leaves the current
revision, its package hash and the history unchanged. Archive, restore,
metadata edits and duplicate ids are exercised the same way.
Documents the /api/drawings contract, schema v4 and the fact that the backup
manifest and restore check do not yet verify drawings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>