Commit can attach the stock's rail to a sheet whose nest has no (or another)
default rail, but only the default rail was saved and the reader re-attached
sheets only to it, so the removed clamp and its time vanished on reload. A
sheet following a rail other than the default now saves it in an optional
per-plate clampRail (read leniently, omitted otherwise), and the reader
re-attaches the sheet to it.
PM 22daec3d-dabb-4aae-95f7-c1d090d5dcdf
Every plate was written with "removedClamps": [], so files without the
feature changed. The key is now omitted unless a clamp was removed, like
the other additive sections; nest-file-format.md documents removedClamps
and removalMinutes and their lenient reading.
PM 6ded8ac4-84fd-4e8b-9a3b-6f41e494542c item (c)
The optional per-plate removedClamps list was deserialized as a typed
List<string>, so a string or a list of numbers threw JsonException and the
whole nest failed to open. It now reads leniently: a non-array value reads
as none removed and non-string entries are skipped. The saved zones load
either way, so a removed clamp's area is never silently re-blocked or lost.
PM 9f3d676b-8a1c-4d9a-b877-b5e01e70c3f0
Slice 3b task 1 (D8/D9): ClampRail gains RemovalMinutes (D9, default
5 minutes, validated finite >= 0) and Plate gains RemovedClamps (rail
clamp ids taken off this sheet as a last resort) plus the computed
ClampRemovalMinutes. Plate.SetClampRail gains an overload that
attaches a rail with a removed-clamp set; zones become the rail's
resolution for the sheet minus those ids, re-resolved on every
resize/rotate so a removed clamp stays off and reappears removed if a
later resize brings it back onto the sheet. ClampRail.Matches gains an
overload comparing against the reduced resolution.
IO: PlateDto.RemovedClamps and ClampRailDto.RemovalMinutes persist
(missing removalMinutes falls back to the default; missing
removedClamps means none). The writer's empty-plate drop logic no
longer drops a sheet whose only content is a removal state the
defaults can't recreate. The reader re-attaches the nest rail to a
plate only when its saved zones equal the rail's resolution minus its
saved removed ids, so a reduced-clamp sheet keeps following the rail
(and the removal) through later resizes instead of freezing as static
zones.
Engine/desktop wiring (minimal-removal computation, Auto Nest
last-resort removal, cut-time, UI) is Slice 3b tasks 2-3, not yet
done.
Tests: 16 new Core (ClampRailTests) + 5 new IO (ClampRailPersistenceTests)
covering validation, resize/resolve behavior, round-trip, legacy
missing-key defaults, and the empty-plate-with-removal-only retention
case. Mutation check (reverting the RemovedClamps subtraction) turns
3 Core + 2 IO assertions red, confirming real coverage.
Gates: Release OpenNest.Tests 3884 passed/31 skipped, OpenNest.IO.Tests
105 passed, OpenNest.Engine.Tests (Clamp filter) 98 passed; scoped
dotnet format --verify-no-changes clean.
Omit an empty clamp-carrying plate only when a new plate from the saved
defaults would recreate it: same size and quadrant and zones the saved
rail recreates. A rail-following empty sheet with another size or
quadrant is written again instead of being lost.
Read plateDefaults.clampRail through a lenient converter so a wrongly
typed rail (a string or null width, non-numeric centers, an array in
place of the object) loads as no rail while every plate's saved zones
still load, as the file format documents, instead of failing the whole
nest.
Review findings 4 and 5, Project Memory 4e5f566d.
Write the nest's machine clamp rail under plateDefaults.clampRail
(width, depth, centers) so plates created or resized after a reload
still get the clamps. The key is omitted for nests without a rail, and
a missing, empty or malformed rail loads as none while each plate's
saved zones still load.
On load a plate follows the rail again only when its saved zones are
exactly the rail's for that sheet; other zones are kept as written.
The empty-plate filter now drops an empty sheet whose zones the saved
rail recreates, so the editor's trailing empty sheet is not written
for every clamped nest; empty sheets with other zones are still kept.
Add the additive per-plate clamps array (id, x, y, length, width) to the
nest DTO with writer and reader support. Files without the key load with
zero zones; an individually malformed entry is dropped while the rest of
the nest loads. A plate carrying only clamp definitions now survives the
writer's empty-plate filter; genuinely empty plates remain omitted.
Format documented in docs/nest-file-format.md.
Add NestStatus (Quote/ToBeCut/HasBeenCut) plus MadeBy on Nest, written as
additive camelCase nest.json fields with PascalCase enum strings matching
the units convention. Legacy files and unknown status values fall back to
Quote. The nest info dialog gains a Status dropdown and Made By box.
A cut-off's place in Plate.Parts is its cut sequence number, but
RegenerateCutOffs removed every cut-off part and appended it again, so
any part drag, fill or cut-off move sent the cut-offs to the end. The
nest file didn't store the position either, so reopening did the same.
RegenerateCutOffs now puts each cut-off back at its previous index (new
cut-offs go at the end), and CutOffDto.Sequence saves the index. Older
files without it load the cut-offs at the end, as before.
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
Entities now have a Guid Id for stable identity across edit sessions.
Drawing stores the full source entity set (SourceEntities) and a set of
suppressed entity IDs (SuppressedEntityIds), replacing the previous
SuppressedProgram approach. Unchecked entities in the converter are
suppressed rather than permanently removed, so they can be re-enabled
when editing drawings again.
Entities are serialized as JSON in the nest file (entities/entities-N)
alongside the existing G-code programs. Backward compatible with older
nest files that lack entity data.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add PlateOptions and SalvageRate properties to the Nest class and
round-trip them through NestWriter/NestReader via a new PlateOptionDto.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Material and thickness are properties of the nest (all plates share the
same material/gauge), not individual plates. This moves them to the Nest
class, removes them from Plate and PlateSettings, and updates the UI so
EditNestInfoForm has a material field while EditPlateForm no longer shows
thickness. The nest file format gains top-level thickness/material fields
with backward-compatible reading from PlateDefaults for old files.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add MaterialLibraryResolver for Cincinnati post processor to resolve
G89 library files from material/thickness/gas configuration
- Add Nest.AssistGas property with serialization support in nest format
- Add etch library support with separate gas configuration
- Fix CutOff tests to match AwayFromOrigin default cut direction
- Fix plate info label not updating after ResizePlateToFitParts
- Add cutoff and remnants toolbar button icons
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add FileExtension and FileFilter constants to NestFormat and update all
references across Console, MCP, Training, and WinForms projects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add verbose per-file and per-sheet-size console output during collection
- Skip already-processed parts at the sheet-size level instead of all-or-nothing
- Precompute best-fits once per part and reuse across all sheet sizes
- Clear best-fit cache after each part to prevent memory growth
- Save best-fits in separate bestfits/ zip entries instead of embedding in nest.json
- Filter to Keep=true results only and scope to plate sizes in the nest
- Set nest name to match filename (includes sheet size and part count)
- Add TrainingDatabase with per-run skip logic and SQLite schema
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Rename SizeDto.Height to SizeDto.Length so the serialized JSON
uses "width"/"length" which is more natural for plate materials.
The core Size struct still uses Height internally.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace three separate XML metadata files (info, drawing-info,
plate-info) and per-plate G-code placement files with a single
nest.json inside the ZIP archive. Programs remain as G-code text
under a programs/ folder.
This eliminates ~400 lines of hand-written XML read/write code
and fragile ID-based dictionary linking. Now uses System.Text.Json
with DTO records for clean serialization. Also adds Priority and
Constraints fields to drawing serialization (previously omitted).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
aj
