Delete OpenNest.Engine/Nfp (AutoNester, BottomLeftFill, NfpCache,
SimulatedAnnealing, INestOptimizer, PlacedPart, SequenceEntry), the Core
InnerFitPolygon, and the NestPhase.Nfp member. None had callers outside the
folder: console --autonest and MCP autonest_plate call engine.Nest(), not
AutoNester.
Drop the Nfp cases from NestPhaseExtensionsTests, fix the --autonest help
text, and update CLAUDE.md. NoFitPolygon stays; BestFit pair evaluation
still uses it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Benchmark jobs could only come from .nest files. A JSON manifest now lists
DXF files with quantities (plus sheet sizes, spacing, edge spacing, quadrant
and per-part allowRotation), imported through CadImporter. DXF paths resolve
relative to the manifest; sheet sizes are required from the manifest or
--sheet-sizes and are read in the DXFs' own units. Folder scans pick up
*.nest and *.manifest.json, and invalid manifests fail loudly.
BenchmarkRunner now runs (job x engine) solves concurrently, capped by
--parallel N (CLI default 3; --parallel 1 is sequential). Results are written
by index so report order is unchanged. Concurrent solves compete for cores,
so Time(ms) is only clean at --parallel 1; the run prints a note when N > 1.
Also fixes --output for manifest jobs, which tried to read the manifest as a
.nest to copy metadata from.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Add OpenNest.IO/Bending/BendRepair: opt-in repair of unambiguous paired
ETCH/SCRIBE bend ticks, bounded to <=3.175 mm endpoint movement with
explicit source units. Cut geometry is never modified.
- CadImportOptions.BendRepair configures it; CadImportResult exposes
per-bend BendRepairReports; CadImporter/Dxf wire it into import.
- Console: --repair-bends-mm <limit> --cad-units inches|mm prints
per-bend reports for newly imported DXFs.
- New OpenNest.IO.Tests project (net8.0, synthetic DXFs, 30 tests)
covering bend detection and repair, added to the solution.
- Update README.md and CLAUDE.md for the new pipeline and build/test
instructions.
Loads any .nest file (or folder of them) via NestReader and nests every
drawing with quantity > 0 using each registered NestEngineBase, so it
works sight-unseen against arbitrary real jobs without any hardcoded
geometry. Optionally sweeps a fixed --sheet-sizes list instead of each
file's own plate size.
- BenchmarkJob/JobLoader build immutable job specs; a fresh Plate and
NestItem list is created per (job, engine) run so state never leaks
between engines or jobs.
- NestValidator rejects a layout if any part falls outside the work
area, any two parts are closer than PartSpacing (checked via each
part's own world-space polygon inflated by the spacing, so it holds
for arbitrary concave/holed geometry, not just bounding boxes), or a
drawing gets more parts than requested.
- Scoring matches Plate.Utilization() (placed area / full sheet area);
ties among fully-placed layouts break on the smaller used bounding
box (more usable remnant).
- Report prints a per-job ranked breakdown plus a per-engine summary
(wins, avg utilization, time), and can write a flat CSV.
Verified end-to-end against a synthetic .nest file (not committed)
against the four built-in engines; caught a genuine out-of-work-area
bug in StripNestEngine in the process.
GeometrySimplifier/ArcFit now fit arcs that pass exactly through run
endpoints while balancing tangency error between trusted and estimated
directions, fixing arcs that previously bulged or broke tangent
continuity at fillet/compound-curve junctions.
GravographIS post processor gains per-layer (engrave/cut) tool passes
via a new GravographISPostConfig, so ENGRAVE/ETCH-tagged geometry runs
as a separate scribe pass with its own feed/depth and an operator
pause before the cut pass (spring-floated spindle needs a tool swap).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Convergence loop now uses FillLinear internally to measure actual
waste with geometry-aware spacing instead of bounding-box arithmetic
- Each candidate pair is tried in both Row and Column orientations to
find the shortest perpendicular dimension (more complete stripes)
- CompleteStripesOnly flag drops partial stripes; remnant strip is
filled by a full engine run (injected via CreateRemnantEngine)
- ConvergeStripeAngleShrink tries N+1 narrower pairs as alternative
- FillResultCache avoids redundant engine runs on same-sized remnants
- CLAUDE.md: note to not commit specs/plans
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The documented entries (info.json, drawing-info.json, plate-info.json,
plate-NNN) were from the old v1 format. Updated to reflect the actual v2
structure: nest.json, programs/program-N, and bestfits/bestfit-N.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Document NestEngineBase hierarchy, NestEngineRegistry, and plugin
loading in the Engine section.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Merge ActionAddPart into ActionClone by adding a Drawing constructor,
eliminating the redundant class. ActionClone now handles both adding
new parts from a drawing and cloning selected part groups. Added
Ctrl+F fill support for groups using FillLinear pattern tiling, and
adopted quadrant-aware push directions from ActionAddPart. Refactored
FillLinear to extract shared helpers and add a Fill(Pattern) overload
for tiling arbitrary part groups across the work area.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
aj
