Ahead of the new laser schedule, three ways a post could silently cut
with the wrong process, and one way its settings silently reset:
- Cincinnati CL wrote no G89 when no cut library matched the nest's
material, thickness and gas (or no etch library for etch features),
so the controller cut with whatever library it loaded last. It now
refuses, unless the new "Require libraries" setting is turned off.
- Cincinnati CL declared G20/G21 from its own setting without comparing
the nest's units, so a metric nest posted 25.4x too large. It now
refuses a mismatch.
- CI Fiber posted any material missing from its table as the default
code (MSN), so stainless or aluminum ran with mild-steel technology.
A named, unmapped material is now refused; the default code covers
only nests with no material.
- Posts saved their settings beside their DLL, inside the install
folder a Velopack update replaces, so every update reset them to the
shipped defaults. Saves now go to %APPDATA%\OpenNest\Posts and the
shipped JSON only seeds them; constructing a post no longer writes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate > Set as Default and Nest > Edit's Defaults tab only changed the
open nest, so new nests never picked up the values. Set as Default now
also saves the new-nest defaults, and the Defaults tab gains an opt-in
"Use these defaults for new nests" check.
Machine thicknesses can now set part and edge spacing. A nest takes them
when its material, grade, thickness or machine changes and when a release
creates it; BOM import seeds its groups from them. Spacing edited in the
same dialog stays, and only an untouched trailing sheet follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clamps are physical fixtures that differ between machines, but one global
clamps.json served every machine, so a plasma table and a fiber laser could
not have different rails.
- MachineConfig.Clamps holds each machine's rail in the machine's units,
edited on a new Clamps tab in Tools > Machine Configuration.
- New and BOM import give a nest the rail of the machine they assign;
Nest > Clamps loads and saves the nest's machine's clamps. Each nest keeps
its own copy, so machine edits never move existing nests' clamps.
- At startup, while no machine has clamps, the legacy clamps.json (or the
server's shared copy) is copied once into the default or only machine;
with several machines and no default the user picks one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The flat ten-row list squeezed the quadrant picker to 120x28 and gave no
hint of units or where the defaults are saved. Group the fields (General,
Plate Size, Quadrant, Spacing), lay the edge spacings out around a plate,
show in/mm suffixes, and convert the values when the units switch so a
48 in plate does not silently become 48 mm.
The footer says whether Save writes to this PC or the shared nest server,
and Save is disabled while the shared copy is read-only instead of
failing after the click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5