Commit Graph
19 Commits
Author SHA1 Message Date
ajandClaude Opus 5.5 d2da7396ce feat(reports): move generated time to the footer and name standard thicknesses
The generated date sat among the summary's report details and printed a UTC
offset nobody on the shop floor reads. It now goes in every page's footer,
left of "Page X of Y", in the computer's own time zone without the offset.

The thickness now leads with its gauge or plate fraction ("16 ga - 0.0598 in")
when it matches one, as the thickness box lists it. Reporting references Core
only, so the desktop looks the name up in StandardThicknesses and passes it on
the snapshot.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 07:25:40 -05:00
ajandClaude Opus 5.5 6894fcfade feat(reporting): drop the generic notes under the plate diagram
The fill/cutoff legend, the part-ID note and the "verify geometry and CNC
output" reminder repeated on every plate page and added clutter without
telling the operator anything plate-specific. Only the clamp legend (on
plates with clamps) and the ruler-units line remain.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 08:12:50 -05:00
ajandClaude Opus 5.5 e58e8b85c4 feat(report): add sheet weight to the plates table
The shop needs each sheet's weight for handling, so the summary's plates
table gains a Sheet weight column: one full sheet from its area, the nest
thickness and the nest (or catalog) density. A drawing's own material is
not used, since it doesn't say what the stock is; with no density the
column is left out.

Plates with copies now put the total cut time (and total weight) on a
second line instead of after a comma, which wrapped mid-phrase.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:59:31 -05:00
ajandClaude Opus 5.5 698b91d256 feat(reporting): show job parts as cards with size and weight
The summary's parts table squeezed each thumbnail into a 62 pt column and
had no room for the size and weight the shop asks for. Each drawing is now
a card, four to a row: ID, a larger thumbnail, name, bounding-box size,
weight each and for all nested copies, required/nested counts and plates.
A shortage or extra is a badge beside the ID (SHORT in red) so it stays
easy to spot without a column to scan.

Weight is net area x nest thickness x material density, read as lb/in^3
like the machine material defaults; millimeter jobs report kilograms. A
nest without thickness or density shows "-" and a note saying what is
missing, never a zero weight.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:24:30 -05:00
ajandClaude Opus 5.5 4676c97c2c fix(tests): skip cut-time PDF test when pdftotext is missing
The GitHub Linux runner has no poppler-utils, so ReportPdf throws
SkipException; as a plain [Fact] the test failed instead of skipping.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 01:51:46 -04:00
ajandClaude Opus 5.5 78ca08efe1 feat(reporting): show estimated cut time in nest reports
The nest report PDF gains an estimated cut time: the job total on the
summary, an Est. cut time column in the plates table, and per-plate and
all-copies times on each plate page. Times come from the cut simulation
with the settings last used in Calculate Cut Time, plus clamp removal.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 17:40:33 -04:00
aj 565dc90762 refactor(ui): rephrase negative-tone disclaimers as affirmative guidance
Report, dialog and diagnostic text across post verification, cutoff
planning, alignment and cutting-plan review repeatedly told the user
what checks weren't (safety certifications, proof, guarantees) instead
of what to do. Reworded these to state the same caveats affirmatively
(inspect X, confirm Y, review Z) without changing the underlying
safety guidance, and updated the tests/docs that pinned the old wording.
2026-10-12 07:45:23 -04:00
aj 80c647bf07 fix(report): omit trailing empty stock plates 2026-10-10 13:23:58 -04:00
aj 24be90ace9 fix(report): replace closeups with best-effort grouped labels 2026-10-10 13:14:45 -04:00
aj 4feada094c fix(report): use plain numeric part IDs 2026-10-10 13:14:39 -04:00
aj 4e846007a2 fix(report): use parts per plate consistently 2026-10-10 13:14:31 -04:00
aj 8ebb48694f fix(report): rename plate copies to quantity 2026-10-10 13:14:25 -04:00
aj afa50c5a12 fix(report): display stock dimensions as width by length 2026-10-10 13:14:19 -04:00
aj 028adee046 ci(release): pin Poppler for Windows PDF verification 2026-10-08 19:42:13 -04:00
aj 5fc563bbca test(report): retain Windows PDF extraction with diagnostic 2026-10-08 19:30:15 -04:00
aj 785a861ab9 test(report): place diagnostic PDF in CI artifacts 2026-10-08 19:26:31 -04:00
aj 986ba3dee1 test(report): retain Windows PDF for failed release diagnosis 2026-10-08 19:22:25 -04:00
aj b15c4cf6c6 feat(reporting): add multi-plate pagination and dense-label fallback
Slice 2 of the nest report plan: pagination, overflow and dense-label
coverage on top of the Slice 1 one-plate library.

- NestPdfWriter: general multi-plate pagination. Summary/plate tables
  continue across pages with repeated (HeadingFormat) header rows; notes
  flow as an ordinary paragraph instead of a bounded cell; page headers
  are wrapped and sized into the top margin; drawing areas are located
  per page via DocumentRenderer.GetRenderInfoFromPage.
- ReportText: lossless pre-wrapping (MigraDoc clips an over-tall row and
  lets an unbroken token overflow a narrow cell without warning), capped
  table-cell line counts, plate-range compression ("1-2, 4"), and
  A/B/.../AA map-grid row names.
- NestReportDiagram: label placement centers each part ID on its
  PolyLabel pole (matching PlateView's LayoutPart), computed on a
  placement-independent quantized copy so identical parts share one
  label position. Parts whose ID cannot fit legibly at overview scale
  get a lettered/numbered map grid and a zoomed, framed detail page per
  crowded cell; the writer fails with plate/part/ID when even that
  cannot place a label, or a plate would need more than 24 detail views.
- Tests: NestPdfLayoutTests (multi-plate totals/ranges/same-named
  references, table continuation with no lost rows, long name/notes
  wrapping without column overflow, mm units in all four quadrants,
  dense-label detail views with hole avoidance, save/reload of the
  tabbed/lead-in fixture with stale tab flags, invalid later-plate data,
  late write failures against an existing destination, source
  unchanged on success/failure), ReportPdf test helper (page/word/
  content-stream extraction).
- docs/nest-reports.md: replace the Slice 1 one-plate limits section
  with the general pagination/dense-label contract and the process-wide
  PDFsharp/MigraDoc render lock.

Verification: Reporting filter 70/70; full OpenNest.Tests 2524
passed/21 skipped/0 failed; Engine 351/351; IO 77/77;
EnableWindowsTargeting=true full-solution build 0 errors; scoped
dotnet format --verify-no-changes exit 0. Preview PDFs rendered and
visually inspected (evidence: /home/aj/extracted/2026-09-29/opennest-report-slice2/).
Windows runtime, the desktop adapter and packaged-app font deployment
remain unverified (Slice 3).
2026-09-29 15:43:00 -04:00
aj 74d2b6aa68 feat(reporting): add one-plate nest report PDF library slice
Add OpenNest.Reporting (net8.0, PDFsharp-MigraDoc 6.2.4) with a detached
report snapshot and a PDF writer for an empty/demand-only job or a single
plate layout: Letter portrait summary with vector part thumbnails and a
landscape plate page with a vector sheet diagram, both with Page X of Y.

- Snapshot uses reference identity for document-local R### IDs, recounts
  nested quantities from placements x copies with checked wide integers,
  excludes cutoffs from accounting, and retains no live domain objects.
- Geometry keeps Cut/Display material paths, drops rapid/scribe/lead paths,
  preserves native arcs, holes and intentional tab gaps, and rejects
  malformed programs with plate/part identification.
- Open contours and cutoffs are stroked per contour so PDFsharp cannot join
  a tab gap to the next contour.
- Bundled DejaVu Sans via a custom resolver (including MigraDoc's error
  font); unsupported text fails with the field and code point.
- Layouts beyond this slice (multiple plates, page overflow, labels that
  do not fit) fail with NotSupportedException before the destination is
  replaced; output is rendered to a temporary sibling and moved atomically.
2026-09-29 13:13:32 -04:00