Geometry, nesting and import code now call PortableMath instead of
System.Math for Sin, Cos, Tan, Atan, Atan2, Asin and Acos (Core, Engine,
IO, Data; 269 calls in 64 files). A test fails if those projects call the
runtime's trig again.
With the runtime's trig, Windows and Linux disagreed in the last bit at
non-quarter angles and the same job could nest differently: the
learned-angle nests (a cross fixture) placed 23 parts in Strip on Windows
and 28 on Linux. Now every Engine.Tests pin gives the same layout on both
(3600 passing on Linux and on DesktopPC), Linux layouts are unchanged, and
the learned-angle rows are re-pinned to the shared layouts, which pass the
overlap and work-area checks, and run on every platform again.
Fixes Project Memory 518f3b58.
AutoCAD keeps an open DWG/DXF locked for writing, and ACadSharp's path
constructors (and File.OpenRead / XmlReader.Create) deny write sharing,
so the CAD Converter could not import a part while it was open in
AutoCAD. Open source files read-only with read/write sharing instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Show Original drew nothing until Simplify ran, and then showed entities that
had already been through import cleanup. The importers now capture the
entities before any optimization and the overlay draws those from load, while
Simplify keeps starting from the cleaned entities.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Customers and design tools hand over SVGs, and getting them in meant a
trip through another CAD tool. CadImporter now reads them like any other
drawing, and plates, programs and converter entities can be written out.
An SVG's numbers are not drawing units, so import converts to the nest's
units and never guesses: only an absolute width or height counts as a
stated size, since px means 1/96 in to browsers but 1/72 in to
Illustrator. Without one the desktop asks, showing the size each choice
gives, and headless callers must pass the scale or the import fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Roslyn duplicate scans found the same code copied across layers:
- Data: the three browse sessions share BrowseSession<TPage, TSort>;
the remote clients share NestServerHttp (JSON options, If-Match,
error text).
- WinForms: five paged lists share BrowsePager for loading text,
navigation, sort glyphs and failure messages. The Add Drawings to
Release, Drawing Library and set browser dialogs now dispose their
browse sessions.
- Server: NestQueryRequest reuses DrawingLibraryRequest's helpers;
revision history queries share count and paging binds.
- Engine: RemnantPlateNester delegates to DefaultPlateNester;
CuttingPlanService reuses JointCuttingPlanSearch.Map.
- Core: LineArc and CleanHole lead-ins share LineArcApproach with
unchanged arithmetic order, so output is bit-identical.
- IO: Dxf.GetGeometry overloads share one reader; .nest JSON test
helpers move to NestArchiveJson.
Also fixes the production compiler warnings (CS8632, CS8603, CS0108)
and moves a test off an obsolete forwarding API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
Add OpenNest.IO/Bending/BendRepair: opt-in repair of unambiguous paired
ETCH/SCRIBE bend ticks, bounded to <=3.175 mm endpoint movement with
explicit source units. Cut geometry is never modified.
- CadImportOptions.BendRepair configures it; CadImportResult exposes
per-bend BendRepairReports; CadImporter/Dxf wire it into import.
- Console: --repair-bends-mm <limit> --cad-units inches|mm prints
per-bend reports for newly imported DXFs.
- New OpenNest.IO.Tests project (net8.0, synthetic DXFs, 30 tests)
covering bend detection and repair, added to the solution.
- Update README.md and CLAUDE.md for the new pipeline and build/test
instructions.
GeometrySimplifier/ArcFit now fit arcs that pass exactly through run
endpoints while balancing tangency error between trusted and estimated
directions, fixing arcs that previously bulged or broke tangent
continuity at fillet/compound-curve junctions.
GravographIS post processor gains per-layer (engrave/cut) tool passes
via a new GravographISPostConfig, so ENGRAVE/ETCH-tagged geometry runs
as a separate scribe pass with its own feed/depth and an operator
pause before the cut pass (spring-floated spindle needs a tool swap).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Duplicate circle entities at the same location inflated pierce counts
and cut pricing (e.g. SULLYS-035 showed 9 pierces instead of 8).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add optional Func<string, bool> layerFilter parameter to ConvertEntities
and two new GetGeometry overloads (path and stream) that accept a layer
filter. This lets callers control which layers to exclude instead of
being limited to the hardcoded IsNonCutLayer check. Existing overloads
without the filter continue to use the default IsNonCutLayer behavior.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
ACadSharp already includes DwgReader, so this wires it up across the
entire import pipeline — Dxf.Import, CadConverter drag-drop, nest
import dialog, console CLI, BOM analyzer, and training data collector.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Consolidated two stateless classes into one unified API: Dxf.Import(),
Dxf.GetGeometry(), Dxf.ExportPlate(), Dxf.ExportProgram(). Export
state moved into a private ExportContext. Removed bool+out pattern
from GetGeometry in favor of returning empty list on failure.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
aj
