On an enclosed machine a cutout slug that tips once cut free can stand up
above the sheet and catch the enclosure door when the pallet changes. The
head already keeps off cut cutouts, so this is about clearing the door, not
the head.
Cutting Settings > Cutouts > "Slice slugs the support grid can't hold
level" (CuttingParameters.SliceTippingSlugs, off by default, saved per
machine thickness and written only when on) makes Plan Cutting cut each
such slug along the bed's contact lines (grid rows and columns, slat center
lines) before the cutout, so no piece keeps a contact and the pieces drop
between the supports. Each slice stops a kerf short of the cutout, so the
pieces stay attached until the cutout's own kerf frees them together. A
slug the bed holds level, or one on no contact, is left whole; a cutout
holding another part or another of its part's cuts is never sliced.
Slices are break cuts emitted right after the drawing's own break cuts,
pierced on themselves and led straight back to their start. The
released-contour proof now leaves out straight break cuts lying wholly
inside one of the part's closed holes, since the grid cells they free are
scrap; break cuts in material still take part. The plan fingerprint only
changes when the setting is on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model the machine's support bed as a grid of contact points measured
from the plate origin, and check each part's center of gravity against
the convex hull of the grid points under its material. The bed is
extensible so straight and CAD-imported curved slats can follow.
- Core: SupportBed/SupportGrid, SupportMaterial and SupportAnalyzer
(margin with registration tolerance, best single tab point)
- Nest-wide support bed that every plate follows, saved in
plateDefaults.supportBed; machine defaults in support-grid.json
- CuttingParameters.SupportTabs: Plan Cutting tabs only unsupported
parts and limits their perimeter entries to points where the tab
steadies the part, falling back to any fitting entry
- Desktop: Nest > Support Grid..., View > Draw Support overlay and a
"Tab parts the support grid cannot hold level" tab option
- docs/support-tabs.md, nest file format and planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5