Each makes the flat blank of a part bent or rolled along its length,
sized with the bend allowance at the K-factor. Angle and channel bends
are saved on the drawing as 90 degree up bends and etched as an
imported DXF's up bends are. The preview draws each part's section
beside the blank, dimensioned with the formed sizes; a long part's
section is enlarged so it stays readable. K-factor is a plain number,
not a length, in the form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a Shape Library leader on a bolt circle, hole or corner arc now
moves its arrow round the curve so the line stays radial. The flange's
bolt circle is drawn dashed in teal instead of dotted orange, which read
as a solid dimension line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Extension lines now walk in from the dimension line until they come 6px from
the drawing's outline, as on the CAD Converter, passing measured points that
are off the outline (a rounded rectangle's sharp corners). The flange bolt
circle is a leader landing on the dotted circle from outside, between holes,
instead of a linear dimension whose extension lines crossed the flange.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shape Library's hole diameter leader now crosses its hole through the
center to the far edge, arrows pointing out onto both edges, wherever the
label is dragged. The hole pattern dimension measures a dotted bolt circle
through the hole centers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shape Library no longer has a side panel of inputs. Each length is a
dimension line or leader on the preview; click its label to type a new
value (Enter applies, Esc cancels, Tab moves to the next dimension), as
Edit Clamps does on the plate. Invalid values keep the editor open in
red and the last good shape on screen. Settings with no place on the
drawing (sides, pipe size, clearance, blind) are clickable notes along
the bottom. The flange hole leader carries the count beside the size,
such as "Ø7/8" x 8 holes".
Shapes declare their dimensions through ShapeDefinition.GetDimensions;
lengths show as fractions when exact to 1/64 (Fraction.Format). Edit
Clamps' inline text box moves to a shared DimensionBox.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>