As in the WinForms nest window, a part can be added from the Drawings
tab two ways. Pressing a drawing picks it up: when the pointer then
enters the plate view, the place tool starts with one part of the
drawing selected in the list, placed by a click, Enter or F1 like a
copy. Dragging a drawing onto the plate adds one part centred where it
is dropped, as one Add Part step.
A drop is refused while Auto Nest runs on the nest and for a drawing of
another nest. A double-click, a drop (at once, before the pointer can
re-enter the plate on X11 and macOS), Edit > Cut or Copy, or an Undo
puts the pick-up down, and the plate takes it only once. The list
selects one drawing at a time and keeps it selected when rebuilt.
As in WinForms, the pointer entering the plate view gives it the
keyboard, and a dropped part leaves the cut-offs as they are.
Edit > Cut (Ctrl+X) and Copy (Ctrl+C) start the shared place tool with
the selected parts, as the WinForms Clone Parts action: the copy follows
the pointer, drawn selected and unnumbered, and a left click, Enter or
F1 places it as one Add Part/Add Parts step. Shift settles it toward the
plate's corner on geometry and Ctrl alone on bounding boxes, in the
order saved in Tools > Options > Clone push placement, read at each
placement. Arrow keys, X/Y, a middle click and Shift+wheel move or turn
the copy without an undo step; a middle double-click turns it rather
than fitting the view. Delete removes the copied parts. Escape returns
to Select. Cut also removes the parts as one Cut step.
As in WinForms, the part under the cursor is highlighted only in Select,
nothing is copied or placed while Auto Nest runs on the nest (a middle
double-click then fits the view), and Undo or Redo ends the tool, which
holds the old nest's parts, so Escape cannot bring it back. An ended
tool's copies leave the drawing cache. The view keeps the keyboard after
a menu click so Enter and the arrows reach the tool.
The plate view edits the selection through the shared PlateEdits and
Select tool, recording each edit in its nest tab's undo history under
the WinForms labels:
- Delete (with any modifiers) removes the selected parts and cut-offs.
- Arrow keys nudge by 10; repeated nudges undo as one Nudge.
- Shift+arrows, X, Shift+X, Shift+Y and Y push to contact (Ctrl+X does
nothing until Cut comes with the place tool).
- A middle click (moved under 5 px) turns the selection 90 degrees, a
double-click 180; a middle drag still pans, and a middle double-click
fits only with nothing selected.
- Shift+wheel turns it by 10 degrees per notch, Ctrl+Shift+wheel by 1,
away from the user clockwise; with nothing selected the wheel zooms.
- Dragging a selected part moves the selection as one Move; losing the
pointer mid-drag ends it there, and a middle click during the drag
turns the selection without ending it.
As in WinForms, each nest keeps a plate manager that keeps one empty
plate at the end inside the edit's own step, so deleting every part on
the last full plate undoes in one step. Each nest's cut-offs regenerate
with its own cut-off settings (saved head lock in the nest's units,
then the machine's cut-off defaults), read again before Undo or Redo
swaps a nest in. The Plates and Drawings lists rebuild after the step
closes when their counts changed, keeping the plate, zoom and
selection. While Auto Nest runs on a nest its plate takes no edits, as
the WinForms modal progress window prevents them.
PlateEdits ports the WinForms plate view's edits of the selection, with
its undo labels and coalescing: Delete (parts and cut-offs, cut-offs
regenerated once when the plate has any), Nudge by the offset increment
or one repeat step, Push to contact, Rotate about the selection's
centre keeping its lower-left corner (a quarter turn, or by wheel
notches at 10 degrees or a tenth of that), repeated nudges and wheel
turns undoing as one step.
The Select tool drags the selection as one Move step. Cut-offs
regenerate when a drag actually moved parts (WinForms also does it on a
plain click, adding an extra undo step); the regeneration runs before
the step completes, so a failure rolls the drag back, and a view that
loses the pointer mid-drag ends the move as a release would, keeping
the selection.
A plate tool host now has to supply its undo wiring, the nest's cut-off
settings and an edits lock (WinForms EditsLocked): while locked no edit
runs and no press selects or starts a move.
Combine the Edit menu (Undo, Redo, Select All) and restore the whole
part selection by index after an Undo or Redo, now that the canvas
selects several parts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The plate view routes left and right clicks to the shared Select tool,
draws the selection, the blue/green selection window and selected
cut-offs as WinForms does, pans with a middle drag and handles Escape.
Edit > Select All (Ctrl+A) is added, and the status bar shows the tool
and the selection's bounds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit > Undo/Redo name the next step and follow the active tab's history;
Ctrl+Z, Ctrl+Y and Ctrl+Shift+Z undo the nest unless a text box has focus.
A restore keeps the plate, zoom, pan and selection. Auto Nest's commit is
one undo step and blocks Undo on its nest while it runs. DEBUG builds warn
about edits made outside a change scope.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Write PlateViewDrawRapid/PlateViewDrawBounds only when changed from the default
or already saved, as the WinForms settings provider does, so a later default
change still applies. Give the render thread a copy of a broken common-line
part's box, and prune the label-point cache with the part paths.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The plate canvas now draws from the shared OpenNest.Desktop geometry
(ProgramPaths.cs is gone) and maps through ViewTransform: tabbed cutouts
fill as holes, break cuts stay out of the fill, display-only geometry is
dashed, and etch-only parts select by their marks. It adds the origin
axes, irregular sheets with hatched obstacles and their usable outline,
part numbers at the label point, cut-off lines with their segment
numbers, active and removed clamps, common lines, and the selection box.
View gets Draw Rapids, Pierce Points, Bounds, Offset, Cut Direction and
Support, per nest as in WinForms. Rapids and bounds are read from the
shared user settings (PlateViewDrawRapid/PlateViewDrawBounds) when a
nest opens and written when it closes; --snapshot ignores them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Avalonia app applies the colour scheme saved as ActiveColorScheme in
the shared user-settings file when the main window opens, and recolours a
nest's drawings from it when opening the nest, as WinForms does.
The plate canvas draws the background, sheet, edge spacing, etch, part
outlines and selection from the active scheme through SkiaSchemePalette,
a cache of Skia colours rebuilt when the scheme's colours change, instead
of hard-coded colours. Part outlines follow the scheme's outline colour
or the fill darkened as WinForms darkens it. There is no Options screen
to change the scheme yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds OpenNest.Avalonia, a throwaway Avalonia 11 app kept out of
OpenNest.sln, to gauge a Linux port. It reads nests through
OpenNest.IO and draws plates with Skia: a port of the desktop's
display paths (cuts, etches, manual lead-ins, filled material),
pan, cursor zoom, fit, hover and selection, beside a plate list and
a drawings DataGrid. --snapshot renders the window to a PNG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>