Equal-cost plans break ties by the largest edge offcut, from any of the
four edges. A caller that wants the leftover off one way, such as a
shop that keeps only end drops, or a benchmark scoring the used sheet
height, had no way to say so. On the converted Nestbolt jobs the
extended Irregular search then found plans whose larger offcut is a
strip down the side, which Nestbolt scores as worse: b-blaz1-strip
3.601 -> 3.867, b-shirts-strip 2.674 -> 2.995.
NestJobOptions.OffcutCut (a CutOffAxis, default null) counts only the
strips one cut along that axis frees, for salvage credit and the
compactness tie-break alike: Horizontal the full-width bottom and top
strips, Vertical the full-length sides. PlateRemnant.LargestOffcut takes
the axis; NestJobCost, the time limit and clamp-removal recovery pass
it on. Unset, nothing changes.
Benchmark manifests accept "offcutCut": "horizontal" or "vertical".
With horizontal, one CPU, 20 s limit, Default:
b-blaz1-strip 3.934 -> 3.333
b-shirts-strip 2.995 -> 2.610
m-box-deep 1.918 -> 1.276 (Nestbolt 1.251)
Manifests accept only the words horizontal or vertical (any case); a
list such as "horizontal,vertical" is rejected. PlateRemnant rejects an
undefined axis. Fixed strategies keep their own no-salvage tie-break
and ignore the option; desktop, Console and MCP do not offer it yet.
Mutation reds: 14/14 (offcut-mutations.py).
"rotations": [0, 90, 180, 270] mapped to automatic rotation, which
allows any angle: Rectangles placed parts at minimum-area angles such
as 279.8 degrees in jobs that allow only quarter turns. Quarter turns
are now a 90 degree sweep from 0 to 270. Without "rotations", a part
still rotates automatically (any angle), as before 2dab9232; the doc and
comment that called that the quarter-turn default are corrected.
A manifest part may list "rotations" in degrees: [0] locks it, [0, 180]
locks it at 0 with the half turn allowed (Allow180Equivalent), and
[0, 90, 180, 270] is the automatic quarter-turn default. Any other set,
or "rotations" together with "allowRotation": false, is an error naming
the part. Without it, "allowRotation" behaves as before.
Lets converted external benchmark jobs (Nestbolt's 0/180 garment and
box jobs) keep their own rotation rules instead of being widened to
quarter turns.
Wraps each solve in DeadlineNestingEngine so a solve stopped at the
limit scores the best valid plan its engine reported; with none it is
reported as timed out. The harness's own five-minute abandon timeout
grows to the limit plus a minute so the engine's limit always fires
first. Values outside 0.001 s to the timer's range, or a missing value,
fail with exit 1.
On the converted Nestbolt m-sign-1 job, Default with --time-limit 60
returns 96/96 parts on one valid sheet in 60.6 s wall, where an
unlimited run took over 300 s.
The benchmark built stock from spacing and quadrant only, so engines were
scored on clamp-free sheets and baselines were never checked against the
clamps they were made with. Stock now comes from NestStockBuilder.FromTemplate,
as in desktop Auto Nest: the source plate's rail is resolved for every
candidate size (explicit zones are offered unchanged), and baseline plates
keep their rail and removed clamps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
aj
