Roslyn Bridge's duplicate scan found helpers copied verbatim between
projects, so a fix to one copy could silently miss the other. Each copy
now calls a single implementation with the same body:
- boundary nearest point: ClipperBridge.NearestBoundaryPoint (ErodedPierce,
ScrapPierceSearch)
- nesting profile of a part: NestLayoutCheck.Profile (CommonLinePair)
- part label points: PartLabels in OpenNest.Desktop (WinForms LayoutPart)
- copied common-line groups: CommonLineGroup.AmongParts (ActionClone,
PlaceTool)
- shared saved cutting parameters: CuttingParametersSerializer.SharedBy
(MCP, Console)
- bounding box of boxes: generic BoundingBox.GetBoundingBox<T> (rectangle
packing items)
- box proximity: Clearance.BoxesWithin (Expander)
Behavior is unchanged: every moved body is identical to the copies it
replaces, so the fill change in Expander and rectangle packing skips the
problem-nest corpus. Core, IO, Desktop and Engine suites and the label,
clone and common-line WinForms tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Whole jobs placed by the fill strategies could put parts on a clamp
keep-out in three ways:
- A best-fit pair left flush on a keep-out was compacted with the clamp
obstacles held at the part spacing, so it already read as inside that
spacing; the push ignores contacts that already overlap and carried
the pair through the clamp to the sheet edge. CompactPair now holds
clamps at zero spacing, as the settle does.
- The pack area was narrowed to a clamp-free remnant only after a fill
had placed parts. With nothing filled the leftovers were packed across
the whole sheet, clamps included. They now get the same remnant.
- A rail with zero clearance left placement no margin over the
validator's keep-out, whose outlines are rounded to a 0.0001 grid, so
a flush edge could read as inside the zone. Placement keep-outs now
grow by at least the spacing slack (0.0005). The expand-spacing walls
keep the exact clamp clearance (WallRectangles).
No tolerance or validator changed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A selection that repeats on a lattice (a fill) now has its lattice scaled
along X, then Y, as far as the work area and clearance floors allow, so the
pattern survives. Multi-part motifs stay rigid, no selected gap closes below
the smallest entry gap, and parts never pass through fixed material. Other
selections keep the pair search.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Expand Spacing measured every ring pair of every part pair for each trial
move, so a packed layout of parts with holes took minutes per spacing
probe. Skip ring pairs, far part pairs and off-path parts whose bounds
already settle the answer.
Every pair was also held at its full starting gap, so parts could not
move toward anything and most layouts stayed at their entry spacing.
Part pairs may now close to the spacing being tried, never below a
smaller starting gap. Cut-offs and clamps keep their full entry gap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The repo mixed variants such as center/centre and color/colour, so a
name could be spelled either way and searches missed half the hits.
Standardize on the US spelling, matching .NET's own APIs (Color, Center).
Wire values owned by other systems keep their spelling: the material
ledger's "Cancelled" hold status and GitHub's "cancelled" job status.
No behavior change beyond the spelling of a few status messages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A clamp rail can now carry its own Clearance, the gap parts keep from
every clamp footprint, independent of part spacing. Unset, it keeps the
sheet's bottom edge spacing as before. Clamp blocks drawn under the
sheet can use close to zero so the laser only stays off them.
Plate.ClampClearance and NestPlateStock.ClampClearance resolve it once;
the engines, interactive fill/pack/push, the layout check, Expander walls
and automatic cut-off placement all read it. The interactive push now
holds clamps at their square clearance keep-out (the layout check's
shape) instead of the part spacing, so parts no longer tuck into its
corners; the clamped fill characterization digests are re-pinned after
checking the new layouts validate.
Persisted as an optional `clearance` on the .nest clamp rail and the
machine clamp settings; edited in Nest > Clamps and the machine's
Clamps tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A tabbed cutout's slug stays attached while the sheet is cut, but nesting
saw a closed hole and could place parts inside it. Nesting and layout paths
now read material through NestingMaterial.ForNesting, which drops closed
contours with tab spans so the slug counts as part. That covers part
outlines and collision lines, the cutout router, fill expansion, best-fit,
NestLayoutCheck and the GPU bitmaps. Area, overlap diagnostics and cutting
keep the hole, and programs without tabs read exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Grows part-to-part spacing of a selected group with the work area and
non-selected parts as hard boundaries. Doubling + bisection search over
the target spacing; Gauss-Seidel straight-line relaxation with anchor
mover policy (later-index selected part moves, first selection never).
Overlapping input is separated along penetration MTVs instead of being
rejected. Cancel/failure never mutates part positions. Clearance gains
BoundaryDistance for ring-pair gaps (part-in-cutout legality).