Commit Graph
787 Commits
Author SHA1 Message Date
ajandClaude Opus 5.5 0e4f4f5109 fix(cutoffs): move a clamp-blocked tail separator past the clamp
A tail separator that landed on a front-edge clamp was skipped outright, so
a plate lost its whole remnant (19.5 in on a 48 x 120 sheet with the part
ending at a rail clamp) over a 1.5-in clamp. The separator now steps to the
clamp's far edge plus its clearance, repeating for any clamp it then meets,
and reports ClampMovedTailSeparator. The kept tail is shorter by that
distance and must still meet the minimum tail length; a separator pushed off
the sheet still reports NoSafeTailSeparator.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 07:15:24 -05:00
aj f31cd1c797 fix(posts): name the post settings fields in head-raise and head-lock refusals 2026-11-04 23:01:58 -05:00
ajandClaude Opus 5.5 dffb06a9e3 feat(circle-fill): end staggered rows with straight rows when that fits more
The Circle fill strategy's stripe layouts (FillEndOdd, FillEndEven) now try
switching from staggered to straight stripes, a diameter apart over the last
staggered stripe, at every stripe, all staggered and all straight included,
and keep the switch that places the most; a tie stays staggered. A 9" circle
on a 60x120 sheet at 0.2 spacing now fills 89 (five staggered rows, two
straight) instead of 88.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 22:02:03 -05:00
ajandClaude Opus 5.5 4dae54c629 feat(plates): resize plate to fit parts at any size
Resize to Fit snapped layouts larger than 48x48 to a hardcoded list of
inch mill sheets, so a plate already on a full sheet could not shrink to
its parts, and the cutoff ignored nest units and the machine's stock
sizes. It now rounds the parts' extent up to the auto-size plate factor
at every size through Plate.AutoSize.

Removes Plate.SnapToStandardSize and PlateSizes.Recommend with its
options; the sheet list and label lookup stay for Machine Config.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 20:45:33 -05:00
ajandClaude Opus 5.5 7ea21f3afe fix(reporting): weigh parts with the machine catalog's material density
Nest reports showed "-" for every part weight on N26-295 because the nest and
its drawings store Stainless Steel 310 with density 0: materials are picked by
name and grade, and nothing copies a density onto them. The densities live in
the machine material defaults, and for this nest not even on its own machine
(CL-980 lists only 304; 310 is on CI FIBER 4020).

The desktop now resolves a catalog density before capturing the report: the
nest machine's exact name and grade, any machine's exact name and grade, then
the same material name. A density stored on the nest still wins, and the
drawing's own material stays the last fallback.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 13:51:23 -05:00
ajandClaude Opus 5.5 90a1a087f0 feat(plates): reorder plates by drag and drop in the Plates list
Operators want plates of the same size grouped together so material
doesn't need sorting when it arrives; there was no way to change plate
order. Rows can now be dragged to a new position (with a drop line and
edge auto-scroll), or moved with Alt+Up/Alt+Down. Each move is one
undoable "Move Plate" step and only reorders: quantities are untouched.

The trailing empty new-plate sentinel stays last. An empty plate moved
to the end becomes the sentinel, as the sentinel rule already does on
reload, so the order shown is the order saved.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 13:41:23 -05:00
ajandClaude Opus 5.5 698b91d256 feat(reporting): show job parts as cards with size and weight
The summary's parts table squeezed each thumbnail into a 62 pt column and
had no room for the size and weight the shop asks for. Each drawing is now
a card, four to a row: ID, a larger thumbnail, name, bounding-box size,
weight each and for all nested copies, required/nested counts and plates.
A shortage or extra is a badge beside the ID (SHORT in red) so it stays
easy to spot without a column to scan.

Weight is net area x nest thickness x material density, read as lb/in^3
like the machine material defaults; millimeter jobs report kilograms. A
nest without thickness or density shows "-" and a note saying what is
missing, never a zero weight.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:24:30 -05:00
aj 54cea0c325 Merge branch 'fix/report-group-ids' 2026-11-04 09:38:39 -05:00
ajandClaude Opus 5.5 c60694b947 fix(reporting): label groups of small parts nested in a larger part's notch
Group outlines and their shared ID were rejected whenever they touched
another part's bounding box. A large irregular part's box can cover most
of the sheet, so small repeated parts sitting in its notch or cutout
(e.g. test squares) were left with no ID at all. Test clearance against
real contours instead, as individual labels already do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 09:38:30 -05:00
ajandClaude Opus 5.5 032854895d fix(reporting): fill parts whose arc ends carry post roundoff
The nest report joined contour segments only within 1e-12, but converted
arcs rebuild their end from the start radius and end angle. Rounded or
incremental programs (end radius a few 1e-7 off the start radius, which
the report's own validator accepts up to Tolerance.Epsilon) left every
arc a hair short of the next move, so outlines split into open pieces
and N26-27K's parts printed unshaded as if they had tab gaps.

Join within Tolerance.Epsilon instead, still far below ShapeBuilder's
welding tolerance and real tab gaps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 03:09:15 -05:00
aj be5fef6875 fix(release): enforce one finish per commit and keep real unplaced reasons
Delta review fixes:

- ReleaseRenest throws when a commit does not call finish, or calls it
  twice: either would leave ledger plates uncoded or count a sheet twice
  for later nests of the run. The ledger sheet count is the codes given.
- A stage whose layout is not kept now lists the copies its layout
  missed with their own reasons (a part no sheet fits stays "does not
  fit"); only the copies it placed are "the proposal cannot be kept".
- A valid ledger layout that places nothing says "Auto Nest placed
  nothing on it" rather than claiming no part fits.
- ReleaseLedgerOffer rejects null rows; docs list every ledger note.
2026-11-03 18:03:24 -05:00
aj c5b6e680cb fix(release): keep ledger codes in the undo step and share bundles per sheet
Review fixes for ledger-first Make Nests:

- The release renest (offer, staged run, codes, note) moves into
  OpenNest.Desktop.ReleaseRenest, shared by the headless panel, the
  live main window and the tests. Codes are given inside each commit, so
  the live tab's Auto Nest undo step records them; before, undo and redo
  dropped every ledger code.
- A bundle repeats one code per sheet: a later nest of the run lost the
  whole bundle once an earlier nest took one sheet. Taken sheets are now
  counted per code (LedgerCodeFilter.ExcludeCopies).
- A stage whose layout is not kept lists every copy it asked for as not
  placed (the proposal cannot be kept), and a rejected ledger layout
  says "MaterialLedger not used: Auto Nest could not keep a layout on
  its stock" instead of a bare "No MaterialLedger stock used".
- "no free stock" is said only when the ledger had none; otherwise the
  note counts what was left out (on other nests, taken by earlier nests
  of this release, too small, unknown shape).
- The ledger is not read for a nest with nothing to nest, the live read
  runs under the tab's stop token, a reason's own full stop is not
  doubled, and the sheet count is the codes given.
2026-11-03 17:53:26 -05:00
aj 2939fe0802 feat(release): nest released groups on MaterialLedger stock first
NestRenest gains a staged run: a nest is nested on finite first stock
alone, then whatever is left on its plate defaults and plate-size
options. Each stage keeps only a valid layout, and the result lists the
stock id each committed plate was solved on.

ReleaseLedgerStock is the ledger stock of one Make Nests run: each nest
is offered the free sheets and drops Auto Nest's ledger load would tick
for its material, grade and thickness (substitutes included), minus
codes on other open server nests (read once per run) and codes earlier
nests of the same run took, which are not on the server until the
release uploads them. Committed ledger plates get their codes as Auto
Nest gives them. An unusable ledger nests on the plate defaults and the
note says why the ledger was not used.
2026-11-03 17:38:07 -05:00
ajandClaude Opus 5.5 53d46303cd fix(planning): raise the head out of a cutout's slug after its lead-out
A cutout's lead-out ends in its slug, so the rapid after it always crossed
the cutout just cut and the strict search refused every plan with cutout
lead-outs. The slug is free and may drop or tip, so emission now marks that
rapid to raise the head, and the rapid check accepts a raised rapid that
starts at the lead-out's end and leaves its cutout exactly once. Cutouts
without a lead-out, or with an overcut, still leave from the cut head down.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 13:45:12 -05:00
ajandClaude Opus 5.5 6c4ebe49b3 fix(planning): cut the remnant cut-offs last
The last strip line stops at the remnant's full-length horizontal
separator, so it never counted as separating the sheet and the planner
cut it wherever the route passed it, often first (N26-264). That frees
the X-tail remnant early and loses the mass that absorbs heat while the
parts are cut.

A continuous line from a sheet edge or separator to another now counts
as a separator too (CutOff.Separators, found in rounds), so Plan Cutting
and Part Sequencing cut it after every part, just before the separator
it stops on. The problem-nest harness now adds scrap cut-offs with
KeepHorizontalRemnant, as both desktop entry points do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 12:50:33 -05:00
ajandClaude Opus 5.5 fbc23d6b64 feat(nesting): nest higher priority numbers first
Priority worked like a rank (lower first) with a default of 0, and the
Edit Drawing form stopped at 0, so moving one part ahead of the rest
meant renumbering every other drawing. Higher-first lets a user raise a
single part to 1 and leave everything else at the default.

Every engine, filler and candidate comparer now serves the highest tier
first. Stored values keep their order:
- .nest files add `nestPriority` and keep writing the negated value under
  `priority`, so older readers nest in the same order; files without
  `nestPriority` are negated on read. Drawing packages strip both, so
  package hashes are unchanged.
- Library settings send both keys the same way for older clients.
- Server schema v18 negates stored drawing priorities (an older server
  refuses the upgraded database).
- Job documents move to version 2; version 1 jobs are converted, and an
  older worker refuses version 2 instead of reversing the order.

The Edit Drawing form now accepts negative priorities and says higher
numbers nest first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:02:07 -05:00
ajandClaude Opus 5.5 d133f6879b fix(geometry): leave leads out of push and collision material
A part with lead-ins applied could not be pushed away once another part
touched it. PartGeometry kept LEADIN/LEADOUT entities as material, so the
leads chained onto the perimeter as open spurs and the spacing offset no
longer closed. The slide-contact classifier cannot tell the material side
of an unclosed boundary and blocks every contact, so parts resting against
it could not move up or right off it. Leads are cut into scrap, and the
spacing review, overlap analyzer and support checks already drop them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:44:43 -05:00
ajandClaude Opus 5.5 52e421dcbe fix(cutting): center straight leads on a corner a tab wraps
A tab entered at a fillet joint trims back around the corner, so the cut
stops on one edge and starts on the other. Each straight lead took its own
edge's normal and the pair sat 150 degrees apart, reading as one bent line
through the corner. Both now take the bisector of the two ends' normals and
form the same V they form on a straight edge, falling back to their own
normals when either lead would not clear the part.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 22:08:18 -05:00
ajandClaude Opus 5.5 6ee81a3501 fix(cutting): keep rapids off cut parts no single tab can steady
A support-tabbed part that no single tab can hold level may tip once cut,
yet its tabbed outside was crossable like any retained part, so Plan
Cutting could rapid back across a row of long strips. Its outside is now a
rapid obstacle, closed across its tab gap, in the search, replay, cut-off
insertion and the safest route.

Its fallback entries are ranked toward the next cut rather than steadiest
first, so a long strip can be left toward the next part, and the "cut those
two the other way round" rule applies only when the approach crosses no
other part.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 22:07:28 -05:00
ajandClaude Opus 5.5 91089820ee feat(engine): group like parts in Irregular's grouped variants
After its six variants and tail re-plan, Irregular decodes the job again
with each type of three or more copies packed as one group, in a searched
order, holding back up to four copies per group that would start a ragged
row and filling them into the gaps afterward. When everything fits, the
best candidates are re-packed in a strip ending just short of the front.

The pass runs after the ungrouped search, which is unchanged, and replaces
its result only by beating it. The help tutorial's parts now end at 34.9"
instead of 38.1" on 60 x 120.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:41:33 -05:00
ajandClaude Opus 5.5 a2966b9f86 test(cutting): post the tutorial nest with a clean CL review
With the CL post declaring placed order for nests it writes as planned,
the help tutorial's nest must reach posting with no findings at all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:29:57 -05:00
aj 5da1e35e88 Merge branch 'refs/heads/claude/objective-yalow-6f6bde' into claude/help-docs-update-list-760b9c 2026-11-02 17:26:44 -05:00
ajandClaude Opus 5.5 72039a238b feat(post): declare placed order for CL nests that post in it
The Cincinnati CL post always drew an "incomplete final rapid sequence"
warning because it never declared IPostVerificationSupport. It writes etch
features before cuts, inserts or drops rapids, and with part sub-programs
rapids to each part's corner, so it cannot declare it unconditionally.

IPostVerificationSupport gains a nest-aware PlacedProgramOrderChange(nest)
(null = preserved; otherwise the reason, shown in the warning). The CL post
answers it from its own writer: part sub-programs and smart rapids off, and
every part's and hole's posted motions exactly equal to its placed ones.
Plan Cutting cuts scribes first, so planned nests qualify. CNC output is
unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:21:25 -05:00
ajandClaude Opus 5.5 6771533e03 fix(cutting): leave the tab open on a round perimeter
A tabbed outside cut is trimmed short of its entry, but the trim only
handled lines and arcs: a round part's outline is one circle, so it was
cut whole. Plan Cutting counted it as tabbed and called the plan ready,
then the pre-post review found no tab and warned that the part may tip.
Cut a tabbed circle as an arc that stops the tab's chord short of its
entry, travelling the circle's own way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:20:23 -05:00
ajandClaude Opus 5.5 c243830641 test(cutting): plan the help tutorial's first nest ready
The "Your first nest" layout (the help's sample parts, Auto Nested on a
60 x 120 sheet over a 2 inch support grid) must plan without warnings,
with support tabs on and off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 16:54:59 -05:00
ajandClaude Opus 5.5 a0d6c7212b fix(cutting): raise the head for rapids into hole sub-programs
Round holes are cut as sub-programs, which are never marked because they
may be shared, so the safest-route fallback could not raise the head for
the rapid into a hole: on interlocked layouts every such crossing stayed
a finding and the plan stayed unverified. A HEAD RAISE marker may now sit
directly before a sub-program call, raising the call's arrival rapid.

- Motion reader: a marked call raises its first rapid; each sub-program
  motion records the part's own call that runs it.
- RaisedRapids marks the call when the crossing rapid is its arrival.
- Cincinnati CL keeps the marker with its hole call and writes M47 before
  it; part sub-program dedupe now tells marked programs apart.
- CI Fiber raises before the hole's first G0.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 16:54:59 -05:00
ajandClaude Opus 5.5 8a282d53cf feat(cutting): let a tab alone hold parts up to 6 in new settings
Small parts on a coarse support grid (the help tutorial's 5 x 5 gussets
on a 2 inch grid) rest on one or two points, so no single tab could
steady them and every plan came back unverified. New cutting settings
now start "Tab alone holds parts up to" at 6; settings saved without the
field still read as 0, so existing settings keep their meaning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 16:54:59 -05:00
ajandClaude Fable 5.1 ceddd8cf93 test(cutting): add an opt-in sweep over a folder of production nests
Plans every occupied plate of every .nest file in a local folder the way
Plan Cutting does after clearing lead-ins and cut-offs, and writes one
JSON line per plate with its outcome, warnings, fallbacks, expansions,
time and spacing pairs. It is how the reliability sweep found its
failure classes over 1,260 production plates; the nests and the report
stay outside the repository, and the test skips without the folder.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-11-02 14:31:46 -05:00
ajandClaude Fable 5.1 96db154d9e perf(cutting): remember each contour's pierce-zone resolution per preparation
With a pierce diameter set, every internal contour whose configured
pierce is inside the zone is resolved by flattening the cutout, finding
its pole and eroding it, and the search emits a part's whole chain again
on every expansion, so on parts with dozens of such holes almost all of
the planning time went there: three 1,600-motion parts took 41 minutes
and timed out in production. The resolution is a pure function of the
hole, the entry, the configured lead-in, the zone and the turn, so each
preparation now keeps it by contour ordinal and reuses it, unchanged,
across its emissions and copies. The same plate plans in 148 s.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-11-02 14:31:45 -05:00
ajandClaude Fable 5.1 c122e64edd fix(verify): resolve adjacent curves before any native query runs
A fillet whose circle is tangent inside the arc it continues, as a
keyhole's slot ends are, gives the supporting-circle query of the pair
no real root: the circles' distance is the radii's difference up to
rounding, so the intersection comes back NaN, and the unfiltered check
that runs before any adjacency handling refused the whole part as
"nonfinite program coordinates". On the production corpus 17 plates
failed this way. Adjacent curves are now resolved from their shared
vertex before the native query would run, so no query runs for them.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-11-02 14:31:45 -05:00
ajandClaude Fable 5.1 60d235c8ce fix(verify): meet adjacent curves at their shared vertex exactly
Two curves that meet end to end share that vertex, but every contact
check asked the native intersection query about them, and it is
ill-conditioned there: two circles meeting at a shallow angle (a fillet
continuing into a larger arc) or a line meeting its fillet put their root
up to 1e-5 off the joint when the DXF arcs were rounded apart from their
neighbors by 1e-9. Material validation then refused the part as
self-touching, and the open-cut proof read a tabbed perimeter's fillet
joint as a loop, so with support tabs on every such part lost its
retention proof and its plate came back blocked. On a corpus of 1260
production plates this was the largest planner failure class: 61 of 67
NoSolutionWithinBudget plates, all planning once the joint is exact.

Contacts now report an adjacent pair's shared vertex itself and derive
the pair's other intersection from it analytically (two circles meet
again at the vertex's mirror image across the line through their
centers; a line meets a circle again at the far end of its chord),
keeping it only on both finite spans. No tolerance grows: a genuine
second crossing beside the joint is still reported, and overlapping
spans still refuse.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-11-02 14:31:44 -05:00
ajandClaude Opus 5.5 d29f919aa2 fix(io): save nests safely and reopen them with their cut-off settings
Reopening a nest regenerated its cut-offs with built-in defaults (no
overtravel, a different minimum segment) rather than the machine's
settings it was made with, so a nest saved, reopened and posted could
cut scrap that never separates. Plates now record the settings their
cut-offs were last generated with, and files carry them; older files
still load with the defaults.

Saving over a nest file truncated it before writing, so any failure
part way lost the only good copy, and the error reached the user as an
unhandled exception after the save path had already changed. Nest and
settings files are now written beside the target and swapped in, and a
failed save is reported with the old file left intact.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 09:51:11 -05:00
ajandClaude Opus 5.5 e8c52a354d fix(posts): refuse wrong-process output and keep settings across updates
Ahead of the new laser schedule, three ways a post could silently cut
with the wrong process, and one way its settings silently reset:

- Cincinnati CL wrote no G89 when no cut library matched the nest's
  material, thickness and gas (or no etch library for etch features),
  so the controller cut with whatever library it loaded last. It now
  refuses, unless the new "Require libraries" setting is turned off.
- Cincinnati CL declared G20/G21 from its own setting without comparing
  the nest's units, so a metric nest posted 25.4x too large. It now
  refuses a mismatch.
- CI Fiber posted any material missing from its table as the default
  code (MSN), so stainless or aluminum ran with mild-steel technology.
  A named, unmapped material is now refused; the default code covers
  only nests with no material.
- Posts saved their settings beside their DLL, inside the install
  folder a Velopack update replaces, so every update reset them to the
  shipped defaults. Saves now go to %APPDATA%\OpenNest\Posts and the
  shipped JSON only seeds them; constructing a post no longer writes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 09:51:11 -05:00
ajandClaude Opus 5.5 b2cc796e4a fix(cutting): let a part no tab can steady leave from another entry
A support-tabbed part that no single tab can hold level was limited to its
one steadiest entry. Two strips stacked in a frame's cutout then blocked
the plate: from the upper strip's only entry, every route to the lower one
crossed holes already cut. Its other entries clear of inside corners now
follow the steadiest, in the search and in contour recovery; the part is
still tabbed and still warned about. Parts a tab can hold keep their
steadying entries.

The unverified headline also named fixed lead-ins when the only warning
was a part that may tip; it now says what needs review.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 09:34:00 -05:00
ajandClaude Opus 5.5 3d728b000e fix(bestfit): never hold a pair to a tighter aspect than one part
The best-fit filter rejected pairs over a 5:1 aspect (or the plate's)
unless 75% utilized. A long part such as U251-DET3 (27.4 x 3.5, aspect
7.7) is past that alone, so its tightest interlocked pairs (5.1:1) were
all dropped even though they are less elongated than the part itself.
On the 60 x 120 sheet that cost 12 parts: 66 placed instead of 78.

The limit now widens to the part's own bounding-box aspect, so
side-by-side pairs survive while end-to-end pairs of compact parts are
still rejected.

The learned-angle characterization nests re-captured: their 46 x 3 bar
now nests as an interlocked pair, which left the Fill nest identical to
a full sweep, so the notched quantity drops from 6 to 4 to keep the
fixture sensitive to learned angles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 07:58:31 -05:00
ajandClaude Opus 5.5 f9b718e890 fix(preview): stop part labels hanging on twin-outline drawings
A drawing of two equal, separate outlines (RC-204441A23 PT13) froze the
drawing library preview. ShapeProfile takes one outline as the perimeter
and the other as a cutout, so the net area is rounding noise and
ThicknessPrecision fell to 1e-9. A rectangle's pole is a whole ridge, so
the label search refined it into billions of cells on the UI thread.

Net area negligible next to the outline now falls back to the outline's
own width, and the paint-time label search has a cell budget so no shape
can stall painting.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 07:50:06 -05:00
ajandClaude Opus 5.5 0a0da50006 feat(ui): show the layout check in the status bar
An empty canvas corner gave no sign of whether a check was still running,
which matters on large nests. A Layout section beside utilization now
follows the automatic check: checking, OK, or findings in red, with the
full wording in its tooltip. It has its own label so rechecks never
replace the last command's status text.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 23:42:25 -05:00
ajandClaude Opus 5.5 fd37cbffef feat(ui): keep the overlap corner quiet during rechecks
A pending or running recheck no longer swaps the green check for status
text. A clear result stays as a gray check, and earlier findings stay as
dimmed text, neither of which claims anything about the edited layout.
Views without automatic rechecks still ask for a manual check.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 23:42:25 -05:00
ajandClaude Opus 5.5 c0cd7c6aff feat(ui): validate part spacing in the plate view overlay
The overlap check now runs the pre-post part spacing scan on its snapshot,
so the canvas label and posting agree. Too-close pairs are counted in the
label and marked with an orange ring showing the gap, with hover details.
A fully checked plate with no findings draws a green check instead of
text; the status bar keeps the wording. Changing the plate's part spacing
now stales the report, and repeated parts share one offset outline so
automatic rechecks stay fast.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 23:42:25 -05:00
ajandClaude Opus 5.5 44372d129e feat(ui): rename the Fill engine to Lattice and describe engines
"Fill" said nothing about what the engine does, since every engine fills.
It is now Lattice, and Fill stays an alias, so saved selections, scripts
and API requests keep working. Engine descriptions are rewritten in plain
language and shown beside each name in the desktop engine lists; the main
toolbar's tooltip also says when Fill Area falls back to Lattice.

Docs also cover the leftover placement from the previous commit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 21:17:16 -05:00
ajandClaude Opus 5.5 4b2aba83bb feat(fill): keep interlocked pairs whole and place leftovers as pairs
A quantity-limited fill trimmed the parts farthest along the trim axis,
which could take one half from each of two pairs. TrimToCount now finds
interlocked pairs and keeps or drops them whole (from d1d68a91), so the
spare space stays one usable cell.

After a fill, leftovers now run in two orders, pack-first and pairs-first,
and the strategy's comparer keeps the better whole layout, so its ranking
of this step cannot get worse. Even quantities go in as best-fit pairs,
may turn a quarter when unrestricted, are tried in every remnant and are
ranked with the layout around them. Each placed pair slides left and down
against true outlines to take the space its bounding box could not.

On compare.nest Vertical Remnant goes from 6665.1 to 5862.6 and Lattice
from 7200 to 5915.8. Nine characterization pins change from the trim with
counts unchanged; the fill pins now also check layout validity. Vertical
Remnant's golden layout shortens from 28 to 26.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 21:17:15 -05:00
aj 4e92d0e8f3 fix(planning): route a cut-off from its start to its far end
A cut-off always runs away from its fixed edge: the origin side, the only
edge guaranteed to be a real sheet edge. The part order is proposed as a
traveling-salesman path over one point per placement, and a cut-off's
point was the middle of its line. The route did not know the tool must
arrive at the line's start and leaves at its far end, so the parts
before a sheet-splitting line finished level with its middle, and the
rapid down to its start crossed parts already cut.

Each placement now has an entry and an exit point; they differ only for
cut-offs (start and departure). Nearest neighbor and Or-opt go on from
each part's exit, and 2-opt costs a reversed run along its own directed
legs; with no cut-off on the plate the exits are not passed and the
symmetric route is unchanged. The part cut before a cut-off faces its
start.

Cut-off direction is not chosen here: the order reads each cut-off's start
and end from its program as given, and the joint search may still reverse a
head-locked far-edge segment.
2026-11-01 16:51:09 -05:00
aj 277719a1d6 fix(planning): re-plan the last kept part when a learned rule changes what follows it
When a blocked approach teaches an order rule, the search backs up to the
earliest part that approach crossed, keeps the parts before it and
re-plans the rest. The last kept part was planned facing the part that
followed it in the old order. If the new order puts another part after
it, its entry and exit still face the old one, so the plan ends with a
stale exit that a kept-order re-plan of the same order would fix.

Now that part is planned again, in the same place, facing its new
successor; when its successor is unchanged nothing is re-planned.

The locked-among-regenerated fixture's plan changes: rapid 67.60 ->
60.22, expansions 528 -> 268 (digest updated). Learning "cut the
cutoff first" now takes 40 expansions rather than 22, because B is
planned again to face the cutoff; retrying every entry of B took 60.
2026-11-01 16:51:09 -05:00
ajandClaude Opus 5.5 8cc8d04b64 feat(engine): stagger round parts in plate fills
FillEndOdd and FillEndEven had no production callers, so round parts
only got stripe layouts. A Circle strategy now runs them in the fill
pipeline: 8in circles on a 60x120 go from 98 to 112.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:44:00 -05:00
ajandClaude Opus 5.5 bbdd51fabc feat(cad-converter): show the source file's raw geometry as Original
Show Original drew nothing until Simplify ran, and then showed entities that
had already been through import cleanup. The importers now capture the
entities before any optimization and the overlay draws those from load, while
Simplify keeps starting from the cleaned entities.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:07:06 -05:00
ajandClaude Opus 5.5 8076ddbd78 feat(io): join arcs covering a full circle into a circle on import
CAM exports often draw a hole as two arcs that overshoot the seam, plus a
short chord back to the start. The Hole Table rejected these contours for
sweeping more than 360 degrees, so drawings like the HT EX flange listed no
round holes.

CadImporter now replaces coradial arcs on one material layer that cover the
whole circle with a Circle, and drops a chord lying wholly on the overlap.
Arcs that leave a gap or overlap by more than MaxSeamOverlap stay as they are.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:07:06 -05:00
ajandClaude Opus 5.5 1d310b373e test(cutting): share the lead-in tests' point and profile helpers
Three lead-in test classes kept identical AssertPoint and Profile
helpers. They now import LeadInTestHelpers.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:27:45 -05:00
ajandClaude Opus 5.5 f0d84e041c test: share the circle, square, rectangle and contour fixtures
Cutting-planning, diagnostics and fill tests drew the same circles,
squares, clockwise rectangles, closed polygons, rounded rectangles and
right-midpoint rectangle contours in private helpers. They now use
TestHelpers; files whose helper had its own default size keep a
one-line wrapper for it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 10:50:50 -05:00
ajandClaude Opus 5.5 bdd6625713 test: share the rectangle drawing fixture
Thirteen test classes built the same origin-anchored rectangle drawing in
their own private helper (MakeRectDrawing, MakeRect or Rect). They now
call TestHelpers.MakeRectDrawing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 10:21:27 -05:00
ajandClaude Opus 5.5 e231e44f72 refactor(geometry): share box containment, union, rotation and cutout range checks
Private copies of tolerant box containment, box union, vector rotation and
the cutout proposals' coordinate-range check now use one helper each:
BoundingBox.IsWithin and BoundingBox.Union, Vector.Rotate, and
CutoutCoordinates.WithinRange. Tests pin the helpers bit-for-bit against
frozen copies of the removed bodies. No behavior change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:25:27 -05:00