The benchmark built stock from spacing and quadrant only, so engines were
scored on clamp-free sheets and baselines were never checked against the
clamps they were made with. Stock now comes from NestStockBuilder.FromTemplate,
as in desktop Auto Nest: the source plate's rail is resolved for every
candidate size (explicit zones are offered unchanged), and baseline plates
keep their rail and removed clamps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing library browser becomes DrawingLibraryView, a control. The Drawing
Sets window hosts it as its Library tab beside Sets and Releases, and File >
Drawing Library opens the window on it. A library drawing's Releases item
switches to the Releases tab filtered to it. Nest > Add from Drawing Library
stays a dialog, now a thin wrapper around the same view.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Drawing Sets > More > Import BOM reads a BOM and its drawing folder,
matches each drawing to the library by its D4 identity and geometry
(reuse, new revision, or new drawing) and opens the set editor with a
new set prefilled with the BOM quantities. Reading only queries the
library; Create Set lists the uploads and revisions and asks before
storing them, and the set is stored only by the editor's Save.
Parts with no material or thickness still import and are flagged for
Edit Drawing. DrawingPackage.GeometryKey compares geometry independent
of the fresh entity ids each DXF import assigns. In Database mode File >
Import BOM opens this flow instead of creating nests directly; File mode
is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The set browser's six equal buttons become New Set..., Edit..., More and a
bold Make Nests.... Archive/Restore, History... and Releases... move into a
menu that the More button drops down and that is also the set list's
right-click menu (menu key and Shift+F10 open it; right-click selects the
row first). Access keys: &New Set, &Edit, M&ore, &Make Nests; the menu has
&Archive/&Restore, &History, Re&leases. Enabled rules are unchanged; More is
enabled while any of its items is. The picker hides More and has no menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The member grid shows one Material column (name, grade, thickness and
units, such as "Steel A36 0.25 in"), Qty and Note; Cut type appears only
when the set mixes cut types. Move Up/Down are gone: member order only
breaks ties (materials are grouped and sorted on release, nests list
drawings by name), and the stored order is kept as it was. The dialog
opens at 1040 px instead of 1264, with the library pane unchanged and
still resizable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawing sets window now has two tabs. Releases hosts the release list
(paging, nests, Undo Release, New Release) as a SetReleasesView control that
replaces SetReleasesForm. File > Releases stays as a shortcut that opens the
window on that tab. A set's Releases (Sets tab) and a library drawing's
Releases (Drawing Library) open the tab filtered to it, with the filter shown
above the list and Clear Filter to list every release. Releases re-reads its
page whenever the tab is shown again, so a release made on Sets appears.
The set editor gets History... for a saved set; the Sets tab keeps its
History button until the browser's buttons are rearranged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release dialog now reads as a sentence ("Release set 'X' ×N") and
previews what Make Nests will do ("Creates 2 nests: ..."), with refused
materials counted and Fix Drawings reachable without selecting them.
An Options toggle holds the Release ticks, the Nest column and Include
archived drawings; collapsed, an option stays shown while it differs
from its default, and the Nest column shows whenever a Draft nest could
be merged into. Defaults, release, undo and retry are unchanged. The
Status column wraps so refusals are not cut off, and the retry status
reads "... Try Again records it; the nests are not made again."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Wording only, no behavior change: "kit" becomes "set" or "Quantity",
the release button reads Make Nests... (Try Again after a failed
record), the releases list shows Material and Action, and the release
dialog's status lines are shorter. Help in docs/nest-storage.md follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds on the library's Edit Drawing (details as a new revision):
- warns before saving details that would duplicate another active library
drawing (D4), naming them; a failed lookup also asks;
- File > Drawing Library, a nest-less mode of the library browser that lists
every active drawing and edits on double-click;
- the set editor's member grid (double-click, right-click, button);
- the release dialog: Fix Drawings on a group refused for missing material or
thickness or duplicate names, so those refusals are no longer a dead end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Slats are strips of a set thickness running the full length or width of
the table, one every pitch. A part's contacts are the corners of where its
material crosses a slat, so the support check and support tabs work as on
the grid. Nest > Support Bed... picks grid or slats; nest files store
type "slats" and support-grid.json keeps both layouts' values. Draw
Support shows the slats cut off to the sheet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit Settings becomes Edit Drawing: name, customer, material, grade,
thickness and cut type are editable beside the nesting settings and
notes. Units stay read-only. The save is a metadata revision with the
same package, so nests keep the revision they hold, and the release
refusal for drawings without material or thickness now has a fix.
v0.2.0 adds the Machines page (nest machine, default machine, per-machine
support grid, machine lead-ins) and the machines, nest-machine and
support-grid topic IDs. desktop-help.md now points at the help repo's
version rules so the next release is numbered the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The assigned machine now drives the support grid, lead-ins and cut-offs, so
it should be visible without opening a menu. The status bar shows
"Machine: <name>" beside the material; left- or right-clicking it lists the
machines (the same list as Nest > Machine) above the label.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Machine configurations already held a lead-in, lead-out, kerf and cut-off per
material thickness, but nothing read them: Plan Cutting and Place Lead-in
started from whatever was last applied (often another machine's or another
thickness's leads), and cut-offs used fixed view defaults. Now that nests carry
a machine, those values can be the starting point.
- MachineCuttingDefaults maps a machine's thickness settings for the nest's
material/grade/thickness onto CuttingParameters and CutOffSettings,
converting units. Clean Hole stays on holes; Line + Line is not mapped
because the configuration lacks the second segment.
- Plates without their own parameters start from the last-applied ones with
the machine's leads and kerf laid over them; plates with parameters keep them.
- The plate view's cut-off clearance, overtravel, minimum segment and direction
follow the machine on open, on Nest > Machine and after Nest > Edit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The support grid was one shared support-grid.json, off by default, and a nest
had no machine at all, so a plasma table and a fiber laser could not have
different grids, and nothing could pick machine-specific behavior later
(lead-ins differ between laser and plasma; tabbing depends on the grid).
- Nest.Machine (id + name) persists as top-level `machine` in nest.json;
malformed values load as none.
- MachineConfig.SupportGrid holds each machine's grid; a machine without one
still falls back to the legacy support-grid.json.
- New and BOM import assign the Tools > Nest Defaults machine (first by name
when none is chosen) and give the nest that machine's grid.
- Nest > Machine reassigns a nest and swaps in the new machine's grid;
Nest > Support Grid saves machine defaults to the nest's machine.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stock can arrive up to 1.5 in wider than nominal, so only the origin-side
edge is certain. A cut-off with a head-locked overcut cuts past the nominal
far edge with the head height locked, covering the oversize. With that lock,
Plan Cutting may start the far-edge segment at the far edge: overcut outward,
rapid back still locked, unlock, cut toward the origin. Without it the
direction stays fixed, as decided in Project Memory a20ea455.
- CutOff.HeadLockOvercut / FarEdgeFirst, persisted in .nest; HEAD HEIGHT
LOCK/UNLOCK comment markers; far edge is quadrant-aware.
- Planner offers the reversed far-edge segment in the joint search, the
safest route and segment insertion; Apply records the direction.
- Cincinnati CL and CI Fiber posts gain lock/unlock code settings and refuse
head-locked cut-offs while either is empty.
- Automatic cut-off dialog setting (off by default, 1.5 in), kept between
sessions and used for new cut-offs.
Lock codes and machine behaviour with the head locked are unconfirmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only the packaging scripts installed Help\, so F1 and the Help menu in a
dev build always said help was not installed. The build now downloads the
help.json release once into obj\ and copies it beside OpenNest.exe; CI and
publish output are unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No verified server image has been published yet, so the shop server runs
development builds. Building on the host meant cloning there and hand-editing
compose; the script builds with the local Docker engine, ships the image,
backs up the data volume and waits for the health check, printing what a
rollback across a schema upgrade needs. docs/nest-storage.md describes it
beside the Compose deployment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GET /api/nests/{id}/sheets reads the stored archive's nest.json and returns
the sheet sizes it needs (grouped, width the shorter side, quantities summed)
and each drawing's required and nested counts, skipping the trailing empty
plate as plateCount does. MaterialLedger builds material holds from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A part with about 1,700 holes (P241017-01) never planned: material
capture paired every boundary with every other one and lead checks
scanned every boundary per lead, so both hit the 1M native query limit
and the plate fell back to an unverified best-effort plan.
- Material capture sweeps boundary extents along X and queries only
pairs the lead checks' per-pair clearance cannot skip, in the full
scan's order.
- Material with 64+ boundaries keeps a grid of boundary extents. Lead
checks, contour-joint matching and replay's contour accounting query
only nearby boundaries; ray parity reads only holes on the point's row.
- Only native queries that run are charged to the budget; skipped far
material no longer costs its full boundary count.
- The search looks up chosen holes and route ranks instead of scanning.
With that the plate plans Ready, but in 189 s: every step re-emitted
and re-checked all holes already cut. On parts with 64+ contours a
middle hole step now checks only the contour it adds, continuing the
completed-contour state its prefix left (ReleasedContourState.Continue).
It falls back to the full prefix whenever it cannot continue exactly,
and the last contour still checks the whole part from before it.
Isolated contour emission clones only the chosen contour.
P241017-01 now plans Ready in 5.4 s with an identical route, expansions
and rapid travel. Core and engine suites pass; the problem-nest corpus
matches the unchanged commit's outcomes and expansions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Help > OpenNest Help (F1) and context F1 in Auto Nest and the CAD Converter open
the bundled opennest-help site in a single WebView2 window on its own UI thread.
Both packaging scripts install the opennest-help release pinned in
scripts/help.json, verified by SHA-256. The missing lead-in finding now says
the contour is missing lead-in geometry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release dialog's Add a set box was a pure type-ahead: it queried the
server only after typing paused, so opening it, or clicking its arrow with
nothing typed, showed an empty list. From Drawing Sets > Release that was
easy to miss, but New Release starts with nothing listed, and an empty
dropdown there reads as a missing server connection. The dialog now reads
the first active sets by name when it is shown, and again when the list is
opened while still empty, without dropping the list open on its own; typing
narrows it as before.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Releases could only be reached through one set or one library drawing, so
seeing what the shop released lately meant knowing which set to open first.
File > Releases shows every release on the server, newest first, naming what
each one had ("Kit A ×2, Kit B; Bracket ×4") in place of the per-set
revision and kits, with the same nest list and Undo Release. New Release
opens the release dialog empty, so a release can start from the list rather
than from a set; the plan builder now accepts no lines as an empty plan,
and the dialog's Release button stays disabled until a group is listed.
The list re-reads from the newest page once the dialog records a release.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
After adding library drawings the operator had to close the dialog to see what
the nest now needed, and fixing a quantity meant leaving it for Edit Drawing
one part at a time. The new In This Nest tab lists the nest's drawings (cutoffs
excluded) with their library revision and required, nested and remaining
quantities, refreshes after each add, and edits Required in place.
An edit applies to the nest immediately, like an add, and the nest window
refreshes its drawing list when the dialog closes. Out-of-range values are
refused both when the cell is validated and when they are applied, because
DataGridView only validates on leaving the cell and EndEdit commits without it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Release dialog lists sets and drawings in one grid (with a type
column; Kits / Qty is a set's kits or a drawing's quantity, up to
100,000). Add Drawings... browses the library as the set editor's pane
does and stays open for several adds; listed drawings are greyed and
skipped, archived ones refused. The Drawings tab gains Release... (when
opened from a nest) to start a release from one drawing, and
Releases... so a release of drawings alone can still be found and
undone, since it belongs to no set's history.
docs/nest-storage.md describes the desktop flow, the `drawings` wire
field, null item setId, the drawingId query/probe and schema v11.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plates with staged automatic scrap cut-offs could not be planned: P260810-01
plate 1 ran out of budget even at 10x effort, while the same plate plans
Ready in 3.6k expansions without the lines. A cut-off was one fixed program
cut whole before every part its line passes through, which dragged the tour
to the middle of the sheet and left the head at the far edge of the line;
and cutting every line first (the rejected alternative) weakens the sheet
and breaks the containment operators rely on when they fast-forward a
changed program.
A cut-off stays one definition, but Plate.RegenerateCutOffs now makes one
part per trimmed segment, each with its own place in the cut sequence.
CutOffSegments gives each segment the span of the nominal line it stands
for (end of the segment before it to start of the one after), and the
dependency rules of the planner and Part Sequencing use that span, so a
segment precedes only the parts beside it. The free-order search plans the
parts as if the segments were not there, so adding lines no longer changes
a plate's route, then CutOffInsertion slides each segment into the latest
gap before its first part where the rapid into its pierce and the rapid
from its end cross nothing cut before; only when one fits nowhere is the
plate searched with the segments among the parts. The search looks through
segments wherever they sit (entries face the next part, hole routes rank
from the pre-segment position, rapids are still checked from the segment's
end), so an applied plan replanned with the order kept replays Ready.
Segments saved out of consecutive order are recorded per segment in the
.nest file (`segments`); older readers load them consecutively.
P260810-01 plate 1 now plans Ready in 3639 expansions with every check
passing; rapid travel 1836 against 1547 without the lines. Plates without
cut-offs keep their PlanningCharacterizationTests digests, and the
problem-nest corpus has no plate below its baseline.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Cut planning should rank routes safest first, then fastest, but a plate whose
strict search hit its expansion budget was simply refused ("no plan found
within the search limit"), even when a route with a few reviewable rapid
crossings existed. Scrap cut-offs make this common: their trimmed segments
can wall off a column of parts, and rapids are straight.
When both the free-order and current-order searches stop at the limit, the
batch now walks a greedy safest route from each input, replays it with fresh
checks, and keeps the one with fewer violations (material first, then rapid
crossings, then the rest), then less rapid travel. A route that passes every
check is an ordinary Ready plan; otherwise it is an unverified BestEffort
that lists every violation and applies only with explicit acceptance. Routes
with any motion into material are never offered, so the strict refusal and
its lead-in advice stand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Releasing a set creates new nests or merges into draft ones, so tying the
set browser to the Drawing Library dialog (which needs an open nest) put it
behind a document it never uses. File > Drawing Sets... (Database mode)
now opens a standalone window with the set browser and Release, opening
released nests in their own tabs. The library dialog loses its Sets tab
but keeps Used in Sets and Add to Set on a drawing's menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The library browser showed only a grid and a notes box, so picking the right
part meant reading names and guessing at the shape, and the add controls sat in
a crowded row with the pager. The Drawings tab now splits into the list (with
its pager underneath) and a details pane: a geometry preview, the drawing's
name, customer, material, thickness, cutting and revision, its notes, and the
quantity with a prominent Add to Nest button.
The preview downloads the listed revision's package after the selection settles
for 150 ms, shares a request already loading that revision, and caches drawings
per revision for the dialog's lifetime. It colors the drawing from the record's
settings without advancing the nest's part palette. It is best-effort: any
failure shows "Preview unavailable" and the dialog keeps working, and the UI
update is marshalled explicitly because an STA thread without a WinForms
synchronization context resumes the await on the thread pool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Steel is "Carbon Steel" in OpenNest, matching the Cincinnati post's cut
libraries. The CI Fiber material-code table only listed "Mild Steel", so a
Carbon Steel nest reached MSN only by falling through to the default code.
List "Carbon Steel" explicitly in the shipped JSON and the built-in
default, and keep "Mild Steel" for nests that already use it.
Tests check both names against the shipped config and the built-in
default; the Carbon Steel rows failed before this change. Posted output
is unchanged, since the default code was already MSN.
With every part drawn the same, it was hard to see which parts the drawn
lines had not reached yet. Parts no line reaches are now drawn muted, and
update live while dragging. Clicking a part adds it as a one-point line, so
a stray part can be picked without drawing a line to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every part was claimed by its nearest line even when the line never reached
it, so a part beyond a line's start projected to distance 0 along it and was
cut near the front. Parts now belong only to lines crossing their bounding
box; uncrossed parts follow all the others, ordered by their nearest line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fill only tried 0 and 90 degrees for parts classified as rectangles, so a long
part filling a 60 x 120 plate four high at 90 degrees left a 55 x 59 strip empty
although two more fit tilted about 33 degrees (a reported nest: 4 placed, 6 fit).
The second tilted part only fits with its corner tucked beside the grid, in the
strip the grid's slack leaves, so a plain rectangular remnant fill finds one.
TiltedRemnant runs after the other strategies. It moves the best layout flush to
one end so leftover room becomes one remnant, and to either end of the other axis
so its slack forms one strip; then tiles the part at the most upright angles that
fit the remnant's height and keeps only copies at least the part spacing from the
layout. It is skipped when the part fits the remnant upright, for circles, for an
explicit rotation range and once the requested quantity is placed.
Fill benchmark (--parallel 1): the synthetic set is unchanged (all valid, same
cost and plates). The reported part needs 1 sheet instead of 2 for 6 parts and
2 instead of 3 for 12.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nests, drawings and releases store material and grade as free text, so
there was no canonical list for clients to suggest from or to fix
spelling against. Schema v10 adds materials and material_grades keyed by
SharedListNames.Key, with GET/POST /api/materials. Adding is idempotent
by key and keeps the first spelling.
The tables start empty: the materials already stored did not import
cleanly, so the list is filled through the API instead. Existing
free-text columns are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A release now ends in nests ready to cut rather than empty drafts, and a
merge no longer leaves the draft it cleared waiting for someone to run Auto
Nest. "Nest after release" (on by default) runs Auto Nest headless on every
released group, new or merged, before anything is uploaded.
NestRenest removes every plate and nests each drawing's required quantity
onto sheets from the nest's plate defaults and plate-size options. It keeps
a layout only when it is valid and keepable, so an invalid result never
reaches the server; the nest is saved without sheets and the operator is
told to run Auto Nest. Unplaced copies stay as remaining quantity, and the
status column lists sheets, utilization and what did not fit. A new Nesting
progress stage reports each group, and cancelling while nesting saves
nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release dialog now lists the sets to release instead of one set with a
multiplier. More are added by typing a name (the matching active sets fill
the list as you type) and each set has its own kit count. Its groups span
all the sets, and each group can make a new Draft nest or merge into a Draft
nest of the same material, grade and thickness, listed with its sheet count.
The status column says that a merge discards the draft's layout and that
Undo Release restores it.
A draft open in a tab of this desktop is refused, because nest tabs do not
track unsaved edits and the merge would leave them behind. The main window
tells the dialog which server nests are open.
The release history shows what each release did to each nest (created, or
merged from one revision to another, and what undo did) and gains Undo
Release. When nests changed after the release, it names them and offers to
undo the others, leaving those as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release plan now takes several sets, each with its own kit count. A
drawing listed by more than one set becomes one item with the quantities
summed and each set's share kept, so the release can record what every kit
put into every nest. FindDraftsAsync lists the Draft nests of a group's
material through the new nest query filters.
The session can merge a group into a chosen draft instead of making a new
nest. It downloads the draft at the revision it was chosen at, refuses it
unless it is still a Draft of the group's material, thickness, units and cut
type, adds the items, and removes every plate so the whole demand is nested
again. The save is guarded by that revision, so a draft someone saved
meanwhile fails its group instead of being overwritten. An optional renest
step, run before anything is uploaded, will back "Nest after release"; if it
throws, the nest is still released without a layout.
The release record now carries every set line, merged nests with their
revisions before and after, and each set's drawing quantities.
SetReleaseText.UndoRefusal words a refused undo for the release history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A release that merges into an existing draft needs the drafts of the same
material group. The nest query can now filter exactly on status, material,
grade and thickness. Material and grade compare like the shared material
lists (case and spacing ignored) through a SQLite function, so no key columns
or backfill are needed; a blank grade asks for nests without one, and
thickness matches at the four decimals drawings are stored with.
The client sends the filters only when set, so plain browsing keeps working
against servers that do not know them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A release can now cover several sets, each with its own kit count, so parts
from different kits share sheets. It can also merge into an existing draft
nest instead of always creating one. Schema v9 replaces the single-set
release tables: releases, their set lines, their nests (created or merged,
with the nest revision before and after) and the drawing quantities each set
added to each nest, so a kit stays traceable once kits share a nest. The v8
migration turns each existing release into one set line with created nests.
Undo runs on the server in one transaction: created nests are soft-deleted
and merged nests restored to their pre-merge revision, but only while each
still holds what the release wrote. Otherwise nothing changes and the
changed nests are listed, so the operator can skip them. A nest restored to
that revision counts as unchanged, which lets releases sharing a nest be
undone newest first.
The old /api/sets/{id}/releases and /api/nests/{id}/release routes are
replaced by /api/releases; no tagged desktop used them. The desktop still
releases one set at a time until the release dialog is reworked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adding drawings to a set meant opening the library dialog, then the set
editor, then a second copy of the library in pick mode, then backing out
again. The set editor now has the library as its left pane (unfiltered,
searchable, sortable, paged): select drawings and Add to Set, double-click
or press Enter. Members already in the set are greyed. The library
dialog's pick mode had no other caller and is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The server stored whatever plate count, part count, material and
thickness the client claimed, so a record could disagree with its own
archive, and a bulk importer had to read each written .nest back in full
just to describe it (about a quarter of the PEP archive import's time).
Uploads (POST and PUT /file) now read only the archive's nest.json -
never programs or geometry, and without referencing OpenNest.IO - and
overwrite those fields, following NestReader's fallbacks for thickness,
material, parts with a missing drawing and the trailing new-plate slot.
A file without a readable nest.json is 400 and stores nothing, so the
server can guarantee the record describes the bytes; nest.json
decompression stops at 64 MB. A metadata-only PUT keeps the stored
counts because the archive is unchanged; material and thickness stay
editable there, since the desktop applies the record's values on open.
Server tests that uploaded placeholder bytes now upload small
deterministic archives, and the container smoke's near-limit probe is a
padded real archive. New tests pin the server's values to a full
NestReader read of the same archive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plan Cutting is now the only automatic lead-in assignment, and parts the
support grid cannot hold level are reported wherever they lack a
steadying tab.
- Remove Assign Lead-ins (plate and nest), LeadInAssigner, the lead-in
tool's Auto-Assign button and the Auto Tab size range; old settings
with autoTab sizes still load
- Manual Place Lead-in tabs the clicked entry when support tabs are on
and the grid cannot hold the part (SupportTabSettings)
- New PartSupport finding: Plan Cutting replay and best-effort plans
warn when a drawing pin, a lead-in that does not fit or no single tab
leaves a part unsteady; the pre-post review checks each placed
program's outside tab gap. These warnings replace the advisory
weak-tab notes; only the inside-corner tab note stays advisory, and
never for a pin
- Pinned perimeters keep their pin but carry the support analysis
- Draw grid points as pixel-snapped squares without anti-aliasing
- Post fixtures build lead-ins through a test-only TestLeadIns helper
- Docs: support tabs, pre-post verification and planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A tab cannot lift a part's margin past its contacts' own hull edges, so a
whole stretch of outline often ties for the best tab point, and the first
sample found won, leaving the tab off-center. Keep the full outline search
for the margin, then among samples within Tolerance.Epsilon of the best,
pick the one nearest the line through the center of gravity across the
long side of the outline's minimum-area bounding rectangle. A part held
only near one end is still tabbed at the far end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nest records gain a materialGrade field (server schema v8, blank for existing
rows) that is searched, sorted and versioned like the other metadata. The
Nest Info dialog gets a grade picker listing the machine configs' grades for
the chosen material; density survives only an unchanged name and grade. A
blank recorded grade keeps the archive's grade while the name matches, so
records saved before v8 do not lose it on open. Saved Nests shows a Grade column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Saved best-fit pairs are in the drawing's canonical frame, but the canonical
angle is recomputed on load and was not saved with the set. When that
computation changes (RotatingCalipers checking every hull edge, marks no
longer counted as material), old pairs were replayed in a turned frame and
could overlap.
Each saved set now records canonicalAngle, and BestFitCacheStore.Import
skips sets whose angle no longer matches the recomputed one (1e-9 rad,
modulo a full turn). Sets from older files have no angle and are dropped;
their pairs are recomputed when next needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While a Sequence by Path line is being dragged, the plate view shows the
numbers the finished line would give, without reordering the plate, so
reorder listeners (drawing list, overlap overlay, simulator) are not hit
on every mouse move. The plate is reordered once on release.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plate > Sequence Parts > Sequence by Path: each left-drag adds a line,
cut in drawing order; the jump between lines is a rapid and claims no
parts. Each part belongs to the line passing closest to its center and
is ordered by where that nearest point falls along the line. Cut-first
parts stay ahead and cutoff dependency rules still apply. A small window
offers Undo Line, Clear (restores the starting order) and Done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The best tab point used to land in inside corners: equally good points
run along a straight edge, vertices were tried first and the first tie
won. Operators cannot grind a nub flush there.
- SupportAnalyzer finds inside corners (inward-turning vertex runs of at
least 30 degrees, so chorded fillets count) and keeps tab points a
clearance from them; of equally good points it picks the one farthest
from an inside corner. Plan Cutting and the overlay use twice the tab
size; AcceptsTabAt rejects closer points
- When no steadying entry has a lead-in that fits, the search falls back
to entries clear of inside corners, then to every entry, each ordered
by how well the tab steadies the part, keeping only the steadiest that
fit
- Replay notes parts whose planned tab cannot hold them level or sits in
an inside corner; the notes are advisory and leave a Ready plan Ready
- Console/MCP plate summaries print a ready plan's notes
- docs/support-tabs.md and cutting-planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model the machine's support bed as a grid of contact points measured
from the plate origin, and check each part's center of gravity against
the convex hull of the grid points under its material. The bed is
extensible so straight and CAD-imported curved slats can follow.
- Core: SupportBed/SupportGrid, SupportMaterial and SupportAnalyzer
(margin with registration tolerance, best single tab point)
- Nest-wide support bed that every plate follows, saved in
plateDefaults.supportBed; machine defaults in support-grid.json
- CuttingParameters.SupportTabs: Plan Cutting tabs only unsupported
parts and limits their perimeter entries to points where the tab
steadies the part, falling back to any fitting entry
- Desktop: Nest > Support Grid..., View > Draw Support overlay and a
"Tab parts the support grid cannot hold level" tab option
- docs/support-tabs.md, nest file format and planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Operators often build a nest first and only then want it kept as a
reusable kit. The drawing list's new "Add Library Drawings to Set..."
takes every drawing copied from this server's library, sums copies of
one library drawing, and opens the set editor on a chosen or new set
for review and Save. Unlinked, other-server and zero-quantity drawings
are named as skipped instead of silently dropped.
Members the set already lists keep the set's quantity: a nest released
from a set carries its kit multiplier, so copying its quantities back
would scale the kit on every round trip. Members are added at the
library's latest revision (S1), with a note when the nest holds an
older one or the drawing is archived.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ajandClaude Opus 5.5