Slice 3 of common-line cutting. On costly plate (N26-295: 3/16 RA310S at about
$2,500 a sheet) pairing parts one kerf apart fits the part the spacing cannot:
the last plate's 38 parts fit on one 48x120 with Auto Nest only with pairs.
- Drawing Properties gains "Allow common line" (Drawing.AllowCommonLine, off by
default because customer edge-quality needs vary). The nest's CommonLineUsage
(Off / When it adds parts / Whenever available) is set in Auto Nest and seeded
from Tools > Nest Defaults; both persist (nest.json, defaults.json).
- NestPipeline runs the ordinary solve, then, with a level on, trials where
eligible parts are offered as kerf-gap pair compounds. Placed pairs expand into
parts plus explicit NestJobCommonLine groups, are validated again, and
CommonLineRanking keeps a trial only by the level: count first, then sheets;
"when it adds parts" keeps the plain layout on a tie, "whenever" also takes a
shorter cut or less material, never at the cost of a part. Engines, FillScore
and their comparers are unchanged; Off asks the engine exactly what it did.
- NestLayoutCheck exempts members only through a sheet's explicit group list and
only when the job allows common lines; materializing and committing create
Plate.CommonLines.
- Server nesting writes common-line jobs as version 3 and replays the recorded
trial answers, so the desktop binds the same groups.
- Fill Area honors the level through a PlateFillService overload.
- The benchmark gains --common-lines <level> --kerf <k>.
Benchmark (synthetic nests + N26-295, --parallel 1): with no flag and with
--common-lines off every engine matches the base commit; with a level on no
layout becomes invalid and three runs save a sheet at equal nested area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CreatePlate copied a rail-backed stock's zones but not its rail, so the
materialized plate fell back to the bottom edge spacing as its clamp
clearance while every engine packed to the rail's own. With a rail
clearance below the edge spacing, valid layouts from all engines were
rejected as clamp violations. Carry the rail and any removed clamps
across, sharing the rule the commit path already used.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NestPlateStock carries the outline; its usable material (less obstacles,
eroded by the largest edge spacing) becomes the FrontierPacker's
PackBoundary. The layout check and the runner's candidate validation
reject a part outside the outline or over an obstacle, area-based cost
and the area budget use the material area, salvage credits nothing, and
Rectangles, Circles, FlatBar and the fill strategies place nothing on it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Every Auto Nest run, and every Default-engine run, recomputed each part's
best-fit pairs: job snapshots are fresh objects and BestFitCache keyed
its entries on Drawing reference, so the Irregular engine paid
PairCatalog.Build (about half of a 118-part solve) on every run of the
same drawings.
BestFitCache now keeps a process-wide, bounded (512 sets, least recently
used first) pool of unfiltered candidate sets keyed by the exact content
of a PartGeometrySnapshot (mode and every motion value, bit for bit;
PartGeometrySnapshot.ContentComparer) and the spacing. Every drawing
DrawingJobMapper.CreateDrawing reconstructs from a snapshot declares
that geometry (BestFitCache.ShareByGeometry), so the Irregular pairs and
blocks, the cutout lattice and the Fill/Default job paths all read and
fill the pool. Candidates depend on the program geometry and spacing
alone, so a pooled set is the set the search would produce: benchmark
layouts, costs and placements are unchanged on the synthetic nests (all
engines) and on the 67-drawing, 118-part job. Failed searches are not
pooled, Invalidate leaves the pool alone, Clear empties it, and a
drawing whose Program is replaced stops vouching for its geometry.
Same 118-part job solved twice in one benchmark process (--parallel 1):
the second solve now takes 13.1 s after a 33.0 s first; before, 35.6 s
after 41.8 s.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Last-resort removal ran on any clamped stock, but only a rail-following
plate can record which clamp to pull and its removal time: an explicit-zone
target lost the instruction entirely. NestPlateStock now carries the rail its
zones were resolved from (NestStockBuilder, DrawingJobMapper.FromPlate);
recovery removes clamps only from rail-backed stock, and commit falls back to
the stock's rail when the target plate has none. Runs are now ordered by
distance from the origin along the edge, not by zone list order.
PM 346d46ed-9336-4706-9392-52ed14d6bd33; PM 6ded8ac4 item (d)
Plates the engine built from stock (DrawingJobMapper.CreatePlate, used
by the public result materializer, the layout check and the placement
fillers) stored placement-frame zones, while live plates store them
relative to the sheet's lower-left corner. The same Plate.ClampZones
therefore meant two frames: the new clamp cut checks double-translated
materialized plates in quadrants 2-4, and interactive fill and push on
live plates read sheet-frame zones as placement coordinates, so they
could put parts on clamps there.
Plates built from stock now keep the stock's input zones (sheet frame,
no lossy translate-and-back), and the layout check and interactive
clamp obstacles map through ClampZoneFrame.ToPlacement, which
reproduces the stock's placement zones bit for bit, so engine
placements and validation are unchanged.
Project Memory: opennest 14f93b26-2e41-41f1-b09f-87dc895bb4da
NestPlateStock takes an optional clamp-zone list, translated into the
placement frame exactly like WorkArea (quadrants 1-4) and detached from
caller boxes; empty input keeps stock bit-identical to before. Plate
mappings (DrawingJobMapper.FromPlate/CreatePlate, NestStockBuilder) map
zones across; materialized plates carry them for checking.
NestJobValidator rejects zones outside the sheet or duplicate ids.
RepeatedPlateGrouping and NestLayoutCheck treat clamp sets as stock
identity (C8), and the layout checker flags part material inside a zone
inflated by bottom-edge spacing with the shared spacing slack (C1/C5) -
no tolerance loosened.
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
ajandClaude Opus 5.5