Stock can arrive up to 1.5 in wider than nominal, so only the origin-side
edge is certain. A cut-off with a head-locked overcut cuts past the nominal
far edge with the head height locked, covering the oversize. With that lock,
Plan Cutting may start the far-edge segment at the far edge: overcut outward,
rapid back still locked, unlock, cut toward the origin. Without it the
direction stays fixed, as decided in Project Memory a20ea455.
- CutOff.HeadLockOvercut / FarEdgeFirst, persisted in .nest; HEAD HEIGHT
LOCK/UNLOCK comment markers; far edge is quadrant-aware.
- Planner offers the reversed far-edge segment in the joint search, the
safest route and segment insertion; Apply records the direction.
- Cincinnati CL and CI Fiber posts gain lock/unlock code settings and refuse
head-locked cut-offs while either is empty.
- Automatic cut-off dialog setting (off by default, 1.5 in), kept between
sessions and used for new cut-offs.
Lock codes and machine behaviour with the head locked are unconfirmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The safety raise (M47 P<SafetyHeadraiseDistance>) used to fire only when
the next part had a different drawing name, which has nothing to do with
crash risk: a long rapid between copies of the same part got a plain M47,
while a short hop between neighbouring different drawings got the full
raise. Sheets are rarely flat (5/8" plate can be ~1.5" out of flat within
supplier tolerance), and longer rapids cross more of that bow.
Add SafetyHeadraiseRapidDistance (program units, default 12"): any rapid to
the next pierce longer than it takes the safety raise, regardless of
drawing. Unknown travel never does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part sub-program calls restored the sheet frame with G92 at the part
corner while the tool sat at the sub-program's last endpoint, shifting
every later part. The call now raises the head, rapids back to local 0,0
and restores there. Parts share a sub-program only when their posted
toolpaths match, so per-part lead-ins are kept.
Suppressed moves are left uncut: the cut resumes with a rapid past them.
Head raises go before the rapid that leaves a feature, one per rapid:
the safety raise now precedes the rapid to a new part instead of
following its first feature, and sub-program mode no longer posts M47
then M47 P2000. M47Mode.Auto posts M47 before rapids longer than
M47OverrideDistanceThreshold and /M47 otherwise. ExteriorM47 applies to
the contour spanning the part's cut extents.
The sheet GOTO targets FeatureLineNumberStart and is omitted without line
numbers. PrepareForNest pre-selects only the gas- and thickness-matching
library. Part programs are read through absolute copies, never switched
to absolute in place.
Removes the unimplemented UseSheetSubprograms, CoordModeBetweenParts and
ProcessParameterMode (G89Mode); old configs still load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Group the Cincinnati and GravographIS plugin projects in a Posts/
folder so new machine posts have one home. Project names, namespaces,
and the runtime Posts/ deploy target are unchanged; only relative
paths in the solution and project references move.
ajandClaude Opus 5.5