Commit Graph
10 Commits
Author SHA1 Message Date
aj f061fcacea feat(avalonia): delete, nudge, push, rotate and drag parts on the plate
The plate view edits the selection through the shared PlateEdits and
Select tool, recording each edit in its nest tab's undo history under
the WinForms labels:

- Delete (with any modifiers) removes the selected parts and cut-offs.
- Arrow keys nudge by 10; repeated nudges undo as one Nudge.
- Shift+arrows, X, Shift+X, Shift+Y and Y push to contact (Ctrl+X does
  nothing until Cut comes with the place tool).
- A middle click (moved under 5 px) turns the selection 90 degrees, a
  double-click 180; a middle drag still pans, and a middle double-click
  fits only with nothing selected.
- Shift+wheel turns it by 10 degrees per notch, Ctrl+Shift+wheel by 1,
  away from the user clockwise; with nothing selected the wheel zooms.
- Dragging a selected part moves the selection as one Move; losing the
  pointer mid-drag ends it there, and a middle click during the drag
  turns the selection without ending it.

As in WinForms, each nest keeps a plate manager that keeps one empty
plate at the end inside the edit's own step, so deleting every part on
the last full plate undoes in one step. Each nest's cut-offs regenerate
with its own cut-off settings (saved head lock in the nest's units,
then the machine's cut-off defaults), read again before Undo or Redo
swaps a nest in. The Plates and Drawings lists rebuild after the step
closes when their counts changed, keeping the plate, zoom and
selection. While Auto Nest runs on a nest its plate takes no edits, as
the WinForms modal progress window prevents them.
2026-11-14 20:31:13 -05:00
aj 203945dabf feat(desktop): share part delete, nudge, push, rotate and drag-move edits
PlateEdits ports the WinForms plate view's edits of the selection, with
its undo labels and coalescing: Delete (parts and cut-offs, cut-offs
regenerated once when the plate has any), Nudge by the offset increment
or one repeat step, Push to contact, Rotate about the selection's
centre keeping its lower-left corner (a quarter turn, or by wheel
notches at 10 degrees or a tenth of that), repeated nudges and wheel
turns undoing as one step.

The Select tool drags the selection as one Move step. Cut-offs
regenerate when a drag actually moved parts (WinForms also does it on a
plain click, adding an extra undo step); the regeneration runs before
the step completes, so a failure rolls the drag back, and a view that
loses the pointer mid-drag ends the move as a release would, keeping
the selection.

A plate tool host now has to supply its undo wiring, the nest's cut-off
settings and an edits lock (WinForms EditsLocked): while locked no edit
runs and no press selects or starts a move.
2026-11-14 20:26:01 -05:00
ajandClaude Opus 5.5 267c7e9453 Merge M09 selection into the Avalonia undo work
Combine the Edit menu (Undo, Redo, Select All) and restore the whole
part selection by index after an Undo or Redo, now that the canvas
selects several parts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 20:25:15 -05:00
ajandClaude Opus 5.5 dc8023f076 feat(avalonia): select parts and cut-offs by click, window and Select All
The plate view routes left and right clicks to the shared Select tool,
draws the selection, the blue/green selection window and selected
cut-offs as WinForms does, pans with a middle drag and handles Escape.
Edit > Select All (Ctrl+A) is added, and the status bar shows the tool
and the selection's bounds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 19:30:50 -05:00
ajandClaude Opus 5.5 ad6ffa1fda feat(avalonia): undo and redo nest edits from the Edit menu
Edit > Undo/Redo name the next step and follow the active tab's history;
Ctrl+Z, Ctrl+Y and Ctrl+Shift+Z undo the nest unless a text box has focus.
A restore keeps the plate, zoom, pan and selection. Auto Nest's commit is
one undo step and blocks Undo on its nest while it runs. DEBUG builds warn
about edits made outside a change scope.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 19:27:07 -05:00
ajandClaude Fable 5.2 c8e899c493 refactor(core): move common lines into OpenNest.CommonLines
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:40:26 -05:00
ajandClaude Opus 5.5 f146cf63f5 fix(avalonia): keep default view toggles out of settings and copy boxes for drawing
Write PlateViewDrawRapid/PlateViewDrawBounds only when changed from the default
or already saved, as the WinForms settings provider does, so a later default
change still applies. Give the render thread a copy of a broken common-line
part's box, and prune the label-point cache with the part paths.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 22:18:14 -05:00
ajandClaude Opus 5.5 af31d783cc feat(avalonia): draw plates with everything the WinForms view shows
The plate canvas now draws from the shared OpenNest.Desktop geometry
(ProgramPaths.cs is gone) and maps through ViewTransform: tabbed cutouts
fill as holes, break cuts stay out of the fill, display-only geometry is
dashed, and etch-only parts select by their marks. It adds the origin
axes, irregular sheets with hatched obstacles and their usable outline,
part numbers at the label point, cut-off lines with their segment
numbers, active and removed clamps, common lines, and the selection box.

View gets Draw Rapids, Pierce Points, Bounds, Offset, Cut Direction and
Support, per nest as in WinForms. Rapids and bounds are read from the
shared user settings (PlateViewDrawRapid/PlateViewDrawBounds) when a
nest opens and written when it closes; --snapshot ignores them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 22:18:14 -05:00
ajandClaude Opus 5.5 641e07b766 feat(avalonia): draw plates in the saved colour scheme
The Avalonia app applies the colour scheme saved as ActiveColorScheme in
the shared user-settings file when the main window opens, and recolours a
nest's drawings from it when opening the nest, as WinForms does.

The plate canvas draws the background, sheet, edge spacing, etch, part
outlines and selection from the active scheme through SkiaSchemePalette,
a cache of Skia colours rebuilt when the scheme's colours change, instead
of hard-coded colours. Part outlines follow the scheme's outline colour
or the fill darkened as WinForms darkens it. There is no Options screen
to change the scheme yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 21:23:48 -05:00
ajandClaude Opus 5.5 3e767ca3b6 feat(avalonia): prototype a cross-platform plate viewer
Adds OpenNest.Avalonia, a throwaway Avalonia 11 app kept out of
OpenNest.sln, to gauge a Linux port. It reads nests through
OpenNest.IO and draws plates with Skia: a port of the desktop's
display paths (cuts, etches, manual lead-ins, filled material),
pan, cursor zoom, fit, hover and selection, beside a plate list and
a drawings DataGrid. --snapshot renders the window to a PNG.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:12:18 -04:00