Commit Graph
5 Commits
Author SHA1 Message Date
ajandClaude Opus 5.5 45e7d6f1c8 feat(cad-converter): export DXF, DWG or SVG with bend lines that import reads back
The CAD Converter's Export button only wrote DXF (or SVG) with every entity on
layer 0 and no bends, so a re-imported export lost its bends and turned the
bend etch marks into cut geometry. Exporting now goes through a new
OpenNest.IO CadExporter:

- DXF R14-2018, DWG 2004-2018 or SVG. ACadSharp cannot write DWG 2007, and
  its DWG 2000/R14 output loses entities and layers, so those are not offered.
- Entities keep their layers; etch marks land on ETCH, which import drops and
  regenerates from the bends. A line picked as a bend is written only as it.
- DXF/DWG bends are BEND-layer CENTER lines with an "UP 90° R 0.06" MText note,
  the form SolidWorksBendDetector reads. Pre-2007 files escape non-ASCII note
  text as \U+XXXX, since ACadSharp reads raw non-ASCII back mangled.
- SVG bends are lines in a BEND group with data-bend-* attributes; the SVG
  reader now returns them as bends (scaled with the drawing units) instead of
  dropping the layer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 08:23:13 -05:00
aj 49603eddf9 fix(geometry): nest the same on Windows and Linux
Geometry, nesting and import code now call PortableMath instead of
System.Math for Sin, Cos, Tan, Atan, Atan2, Asin and Acos (Core, Engine,
IO, Data; 269 calls in 64 files). A test fails if those projects call the
runtime's trig again.

With the runtime's trig, Windows and Linux disagreed in the last bit at
non-quarter angles and the same job could nest differently: the
learned-angle nests (a cross fixture) placed 23 parts in Strip on Windows
and 28 on Linux. Now every Engine.Tests pin gives the same layout on both
(3600 passing on Linux and on DesktopPC), Linux layouts are unchanged, and
the learned-angle rows are re-pinned to the shared layouts, which pass the
overlap and work-area checks, and run on every platform again.

Fixes Project Memory 518f3b58.
2026-11-09 19:18:00 -05:00
ajandClaude Opus 5.5 5668952e6b fix(import): read source drawings that are open in another program
AutoCAD keeps an open DWG/DXF locked for writing, and ACadSharp's path
constructors (and File.OpenRead / XmlReader.Create) deny write sharing,
so the CAD Converter could not import a part while it was open in
AutoCAD. Open source files read-only with read/write sharing instead.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:01:56 -05:00
ajandClaude Opus 5.5 bbdd51fabc feat(cad-converter): show the source file's raw geometry as Original
Show Original drew nothing until Simplify ran, and then showed entities that
had already been through import cleanup. The importers now capture the
entities before any optimization and the overlay draws those from load, while
Simplify keeps starting from the cleaned entities.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:07:06 -05:00
ajandClaude Opus 5.5 3a8994c8fe feat(io): import and export SVG drawings
Customers and design tools hand over SVGs, and getting them in meant a
trip through another CAD tool. CadImporter now reads them like any other
drawing, and plates, programs and converter entities can be written out.

An SVG's numbers are not drawing units, so import converts to the nest's
units and never guesses: only an absolute width or height counts as a
stated size, since px means 1/96 in to browsers but 1/72 in to
Illustrator. Without one the desktop asks, showing the size each choice
gives, and headless callers must pass the scale or the import fails.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:50:41 -04:00