Plan Cutting is now the only automatic lead-in assignment, and parts the
support grid cannot hold level are reported wherever they lack a
steadying tab.
- Remove Assign Lead-ins (plate and nest), LeadInAssigner, the lead-in
tool's Auto-Assign button and the Auto Tab size range; old settings
with autoTab sizes still load
- Manual Place Lead-in tabs the clicked entry when support tabs are on
and the grid cannot hold the part (SupportTabSettings)
- New PartSupport finding: Plan Cutting replay and best-effort plans
warn when a drawing pin, a lead-in that does not fit or no single tab
leaves a part unsteady; the pre-post review checks each placed
program's outside tab gap. These warnings replace the advisory
weak-tab notes; only the inside-corner tab note stays advisory, and
never for a pin
- Pinned perimeters keep their pin but carry the support analysis
- Draw grid points as pixel-snapped squares without anti-aliasing
- Post fixtures build lead-ins through a test-only TestLeadIns helper
- Docs: support tabs, pre-post verification and planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Saved best-fit pairs are in the drawing's canonical frame, but the canonical
angle is recomputed on load and was not saved with the set. When that
computation changes (RotatingCalipers checking every hull edge, marks no
longer counted as material), old pairs were replayed in a turned frame and
could overlap.
Each saved set now records canonicalAngle, and BestFitCacheStore.Import
skips sets whose angle no longer matches the recomputed one (1e-9 rad,
modulo a full turn). Sets from older files have no angle and are dropped;
their pairs are recomputed when next needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nests released from drawing sets need a state before Quote: created but not
yet nested or checked. Draft is appended to NestStatus (value 3) because the
server still accepts integer statuses from existing callers, so existing
numbers must not shift; NestStatuses.WorkflowOrder puts it first wherever the
operator picks a status.
Older desktops read Draft as Quote (the documented unknown-status fallback),
and an older server refuses "draft", so the server must be upgraded before
desktops that can set it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Select entities in the CAD converter (click, or drag a window/crossing
box) and right-click to exclude/include them or set them to cut, etch or
display only, regardless of their DXF layer. Delete excludes the
selection.
Roles are stored per source entity on the drawing and persisted in the
entity set as an optional `roles` map. Display-only geometry is kept out
of the program, so posts, nesting and verification never see it; placed
parts draw it as a dashed overlay. Load-time scribe repair skips
etch-layer entities set to cut. Per-entity exclusions now survive filter
changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Saved pairs are in the drawing's canonical frame, but loaded candidates
held the source drawing, so BuildCanonicalParts/BuildSourceParts rebuilt
a different pair for any drawing with a non-zero canonical angle (a 30
degree T-shape came back 16.57 x 10.39 instead of its saved 16.92 x 8).
That reached the Irregular engine's pair catalog and the best-fit viewer
after opening a saved nest. Import now binds every candidate to one
canonical copy, as computed candidates are; fills already passed the
canonical drawing explicitly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reading a nest used to fill the engine's static BestFitCache as a side
effect, which is the only reason OpenNest.IO referenced OpenNest.Engine.
Core now defines SavedPairSet/SavedPairResult and IBestFitStore; the
mapping to BestFitResult moved verbatim into Engine's BestFitCacheStore.
NestReader/NestWriter take the store as an optional BestFitStore property
and skip bestfits/ entries without one.
Every production reader and writer opts into BestFitCacheStore.Shared, so
behaviour is unchanged; the golden round-trip test still matches byte for
byte.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Characterize the bestfits/ entries before moving their mapping out of
OpenNest.IO: golden bytes for hand-built sets, field-by-field restore of
hand-built and computed sets (kept results and used plate sizes only), a
nest without saved best fits, and the loaded-candidate frame on a rotated
source drawing, which today rebuilds to a different pair than its saved
bounds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PEP-converted nests stored etch marks only in each placed part's locked
cutting program; the drawing program held the contour cuts alone. Because
Remove Lead-ins rebuilds a part from its drawing, clearing lead-ins also
erased the marks from every part.
Recover the marks while reading the nest: when a drawing has no scribe
moves and every placement that kept its saved program carries the same
marks, add them to the drawing in its own frame and refresh that drawing's
clean placements. Saved programs are never rewritten, drawings that already
have marks are untouched, and drawings whose saved programs disagree are
left alone rather than guessed at.
Add NestStatus (Quote/ToBeCut/HasBeenCut) plus MadeBy on Nest, written as
additive camelCase nest.json fields with PascalCase enum strings matching
the units convention. Legacy files and unknown status values fall back to
Quote. The nest info dialog gains a Status dropdown and Made By box.
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
Add ChrFont, a reader for Gravograph .CHR engraving fonts, plus UI to
convert placed text into engraved geometry in the CAD converter.
The .CHR files are obfuscated with a single-byte XOR. Different
GravoStyle releases use different keys (0x2F in older versions, 0xCF in
the 7000 series, and others across the font library), so the key is
auto-detected from byte 1 of the file: the font name is ASCII stored as
UTF-16LE, so the high byte of its first character is 0x00 in plaintext
and the raw byte equals the key. This reads every font in a GravoStyle
install regardless of version, not just one hardcoded key.
UI: right-clicking a text item in EntityView raises TextConvertRequested;
CadConverterForm renders it via ChrFont with H/V alignment and adds the
result on an ENGRAVE layer.
Tests use Xunit.SkippableFact and a gitignored test-config.json so the
suite points at a local .CHR file without committing proprietary assets.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Drop CadImportResult.Document: no caller reads it after the
migrations (BendDetectorRegistry runs inside CadImporter.Import
itself, and downstream callers only consume the entity/bend data).
- Drop dead CadConverterForm.GetNextColor() helper: zero callers
since GetDrawings stopped needing it.
- Drop stale 'using OpenNest.Properties;' and unused 'newItems'
local in OnSplitClicked.
- Add Import_WhenNamedDetectorDoesNotExist_ReturnsEmptyBends to
cover the previously untested named-detector branch in
CadImporter.Import.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Consolidated two stateless classes into one unified API: Dxf.Import(),
Dxf.GetGeometry(), Dxf.ExportPlate(), Dxf.ExportProgram(). Export
state moved into a private ExportContext. Removed bool+out pattern
from GetGeometry in favor of returning empty list on failure.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Emit variable definitions before G-code in program text entries and use
\$varName syntax for coordinate fields that have VariableRefs, so programs
round-trip through NestWriter → NestReader without losing variable information.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ProgramReader now supports G-code user variables with a two-pass
approach: first pass collects variable definitions (name = expression
[inline] [global]) and evaluates them via topological sort and
ExpressionEvaluator; second pass parses G-code lines with $name
substitution and VariableRef tracking on motion and feedrate objects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move 43 root-level test files into feature-specific subdirectories
mirroring the main codebase structure: Geometry, Fill, BestFit, CutOffs,
CuttingStrategy, Engine, IO. Update namespaces to match folder paths.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ajandClaude Opus 5.5