Hole sub-programs are stored incremental but were written under G90 as
if absolute, producing invalid arcs. The registry now posts absolute
copies and leaves the nest's programs untouched.
Sheet-level hole calls omitted the part location from G52, so every
part's holes were cut near the sheet origin. Calls now shift to the
part location plus the hole offset.
Hole calls were matched to sub-programs by call id, which planned
emission numbers 1, 2, ... per drawing, so holes from different drawings
shared the first drawing's sub-program and diameter. Calls are now keyed
by program reference and deduplicated by posted toolpath.
A part opening with a hole call got a synthetic rapid that posted an
empty pierce on the part edge. The rapid is now only inserted before a
contour motion with no rapid ahead of it; the hole call carries the
part comment and safety head raise that feature used to hold.
The sheet writer re-sorted parts bottom-then-left with cut-offs last.
Plate order is the cut sequence, so parts now post in plate order.
Regression tests replay the posted G-code for off-origin parts of
several drawings and check each hole's center and radius.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CincinnatiSheetWriter.WriteHoleSubprogramCall emitted
`M98 P<num> X<x> Y<y>`, but per manual §3.98 ("M98 SUB-PROGRAM CALL
WITH NO ARGUMENTS") M98 takes only P and L — the X/Y had no defined
meaning to the control. The intent was to position the sub-program at
the hole center, which is what G52 is for per §1.52 ("local work
coordinate system") and which explicitly does not move the nozzle.
Emit the documented G52 bracket instead:
G52 X<hole.x> Y<hole.y>
M98 P<holeSubNum>
G52 X0 Y0
The hole sub-program is authored in hole-local coordinates, so its
first rapid (the lead-in to the pierce point) resolves to the absolute
pierce under the G52 shift and moves the tool directly there from the
previous feature's end — no phantom rapid to the hole center.
Also add docs/cincinnati-post-output.md as the reference for the full
post output format, with every emitted G/M code cross-referenced to
the Cincinnati programming manual. Un-ignore docs/ (docs/superpowers/
stays ignored) and track the PDF manual alongside the reference.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ajandClaude Opus 5.5