- Add Drawing.HasCustomColor, set when a color is picked in Drawing
Properties or comes from a library record with a stored color.
- Persist it as customColor in .nest files (omitted when false) and keep it
out of drawing packages; split pieces inherit it.
- Recolor non-custom drawings from the active palette when a nest opens and
when the scheme changes; custom colors keep their palette slot.
- Library settings store a color only when it is custom.
- Document drawing colors in nest-file-format.md and nesting-view-colors.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Select entities in the CAD converter (click, or drag a window/crossing
box) and right-click to exclude/include them or set them to cut, etch or
display only, regardless of their DXF layer. Delete excludes the
selection.
Roles are stored per source entity on the drawing and persisted in the
entity set as an optional `roles` map. Display-only geometry is kept out
of the program, so posts, nesting and verification never see it; placed
parts draw it as a dashed overlay. Load-time scribe repair skips
etch-layer entities set to cut. Per-entity exclusions now survive filter
changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A hole can now be declared a tabbed cutout in the CAD Converter: pick a
circle or any edge of a closed hole, set the tab count and width, and drag
the tabs around the hole. The definition persists on the drawing and in the
nest file, and stays editable from the source entities.
The builder replaces the hole with open cut pieces and uncut spans on a new
Tab layer. Tabs are material, so area, nesting and overlap checks still see
a closed hole, but they are never cut. Plan Cutting and Assign Lead-ins cut
each piece from the slug with the internal lead-in and no lead-out. A lead
that would reach back over a tab is mirrored, and an arc lead onto an arc
pierces straight in. Planning accounts for each span between tabs and runs
the open-cut proof, so its own tabbed cutouts certify; tabs followed by a
lead-out are still refused. Pre-post review flags programs that still
contain tab motions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drawings flagged CutFirst (e.g. test squares) are sequenced ahead of
every other part: they get their own route with the chosen method, then
the remaining parts follow. Cutoffs crossing a cut-first part still
precede it. The flag is editable in Edit Drawing, persists in .nest as
`cutFirst` (omitted when false) and is kept by split pieces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Breakoffs are now picked by their joining line, default to the smaller side as scrap
(flippable), and cut that line between tabs on a new Break layer instead of slots.
Plan Cutting and Assign Lead-ins enter each cut from the scrap with the nest's internal
lead-in, or pierce on the line without one; checks treat break cuts as intentional open
cuts that are not material.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Forming backgauge tabs drawn as open cuts came off the sheet loose and could not be
planned. A breakoff merges the scrap into the outline and cuts the shared edge as
closed slots between tabs, so it stays attached and every pierce lands in scrap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drawing cut pins and the per-placement pins-off flag now survive
save/reload and travel in drawing packages.
- `DrawingDto.cutPins` reuses the plate cutting-parameter lead and tab
DTOs. Pins are read strictly per entry: an unknown lead or tab type is
never replaced by a default, because a pin that cut differently from
what was saved is worse than no pin. A bad entry is skipped with a
reader warning naming the drawing and pin, and the rest load; a value
that is not a list loads no pins, with a warning. A nest never fails to
open over pins.
- `PartDto.drawingPinsOff` is written only when true. Anything other than
a boolean loads as pins on (the drawing wins, D1) with a warning naming
the plate and part, so an operator's override is never lost silently.
- Packages carry pins as drawing content, so pinning a drawing changes
its package hash and the newer-revision notice can tell geometry/pins
changes from detail-only ones.
- `Part.DrawingPinsOff` holds the flag; nothing plans with it yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A nest drawing copied from the drawing library has to remember exactly which
revision it is a copy of, so later slices can tell when the library moved on
(D2b) and so a save can target the right drawing. `Drawing.Library` holds the
server key, id, revision and a snapshot of that revision's cut type, thickness,
material, grade, units, notes and package hash. It is immutable, so copies can
share it.
`DrawingDto.library` is additive and omitted when null. It is read leniently:
anything that cannot be trusted as a link drops the link with a reader warning
and the drawing still loads, because a nest must never fail to open over
provenance. Enum names are checked as single names since Enum.TryParse would
accept numbers and comma lists.
Copy paths: converter edits update drawings in place and so keep the link;
canonical engine copies carry it; split pieces are new geometry and get none.
Packages strip it so linking never changes a drawing's package bytes or hash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reading a nest used to fill the engine's static BestFitCache as a side
effect, which is the only reason OpenNest.IO referenced OpenNest.Engine.
Core now defines SavedPairSet/SavedPairResult and IBestFitStore; the
mapping to BestFitResult moved verbatim into Engine's BestFitCacheStore.
NestReader/NestWriter take the store as an optional BestFitStore property
and skip bestfits/ entries without one.
Every production reader and writer opts into BestFitCacheStore.Shared, so
behaviour is unchanged; the golden round-trip test still matches byte for
byte.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PEP-converted nests stored etch marks only in each placed part's locked
cutting program; the drawing program held the contour cuts alone. Because
Remove Lead-ins rebuilds a part from its drawing, clearing lead-ins also
erased the marks from every part.
Recover the marks while reading the nest: when a drawing has no scribe
moves and every placement that kept its saved program carries the same
marks, add them to the drawing in its own frame and refresh that drawing's
clean placements. Saved programs are never rewritten, drawings that already
have marks are untouched, and drawings whose saved programs disagree are
left alone rather than guessed at.
Commit can attach the stock's rail to a sheet whose nest has no (or another)
default rail, but only the default rail was saved and the reader re-attached
sheets only to it, so the removed clamp and its time vanished on reload. A
sheet following a rail other than the default now saves it in an optional
per-plate clampRail (read leniently, omitted otherwise), and the reader
re-attaches the sheet to it.
PM 22daec3d-dabb-4aae-95f7-c1d090d5dcdf
A negative removalMinutes in a saved nest made the ClampRail constructor
throw, so the reader dropped the whole rail and every sheet lost its
removed-clamp state and time. An invalid value now falls back to the
default five minutes, like a missing one.
PM 6ded8ac4-84fd-4e8b-9a3b-6f41e494542c item (b)
Slice 3b task 1 (D8/D9): ClampRail gains RemovalMinutes (D9, default
5 minutes, validated finite >= 0) and Plate gains RemovedClamps (rail
clamp ids taken off this sheet as a last resort) plus the computed
ClampRemovalMinutes. Plate.SetClampRail gains an overload that
attaches a rail with a removed-clamp set; zones become the rail's
resolution for the sheet minus those ids, re-resolved on every
resize/rotate so a removed clamp stays off and reappears removed if a
later resize brings it back onto the sheet. ClampRail.Matches gains an
overload comparing against the reduced resolution.
IO: PlateDto.RemovedClamps and ClampRailDto.RemovalMinutes persist
(missing removalMinutes falls back to the default; missing
removedClamps means none). The writer's empty-plate drop logic no
longer drops a sheet whose only content is a removal state the
defaults can't recreate. The reader re-attaches the nest rail to a
plate only when its saved zones equal the rail's resolution minus its
saved removed ids, so a reduced-clamp sheet keeps following the rail
(and the removal) through later resizes instead of freezing as static
zones.
Engine/desktop wiring (minimal-removal computation, Auto Nest
last-resort removal, cut-time, UI) is Slice 3b tasks 2-3, not yet
done.
Tests: 16 new Core (ClampRailTests) + 5 new IO (ClampRailPersistenceTests)
covering validation, resize/resolve behavior, round-trip, legacy
missing-key defaults, and the empty-plate-with-removal-only retention
case. Mutation check (reverting the RemovedClamps subtraction) turns
3 Core + 2 IO assertions red, confirming real coverage.
Gates: Release OpenNest.Tests 3884 passed/31 skipped, OpenNest.IO.Tests
105 passed, OpenNest.Engine.Tests (Clamp filter) 98 passed; scoped
dotnet format --verify-no-changes clean.
Write the nest's machine clamp rail under plateDefaults.clampRail
(width, depth, centers) so plates created or resized after a reload
still get the clamps. The key is omitted for nests without a rail, and
a missing, empty or malformed rail loads as none while each plate's
saved zones still load.
On load a plate follows the rail again only when its saved zones are
exactly the rail's for that sheet; other zones are kept as written.
The empty-plate filter now drops an empty sheet whose zones the saved
rail recreates, so the editor's trailing empty sheet is not written
for every clamped nest; empty sheets with other zones are still kept.
Add the additive per-plate clamps array (id, x, y, length, width) to the
nest DTO with writer and reader support. Files without the key load with
zero zones; an individually malformed entry is dropped while the rest of
the nest loads. A plate carrying only clamp definitions now survives the
writer's empty-plate filter; genuinely empty plates remain omitted.
Format documented in docs/nest-file-format.md.
Desktop Auto Nest, Console --autonest, MCP autonest_plate and the API
NestRunner all run through NestPipeline, so nothing calls the old
orchestration any more.
Delete MultiPlateNester (with MultiPlateNestOptions, MultiPlateResult,
PlateResult, PartClass and PartSortOrder), PlateOptimizer and
PlateOptimizerResult, plus their tests. The explicit-strategy contract
those tests checked now lives at PlateFillService.ResolveStrategy, which
keeps its null-means-Default, canonical-name and unknown-name tests.
CreateFiller loses its internal visibility, which only the deleted
orchestrators used.
This breaks source and binary compatibility for external callers of the
removed types; whole-job callers use NestPipeline.Run or INestingEngine.
Add NestStatus (Quote/ToBeCut/HasBeenCut) plus MadeBy on Nest, written as
additive camelCase nest.json fields with PascalCase enum strings matching
the units convention. Legacy files and unknown status values fall back to
Quote. The nest info dialog gains a Status dropdown and Made By box.
A cut-off's place in Plate.Parts is its cut sequence number, but
RegenerateCutOffs removed every cut-off part and appended it again, so
any part drag, fill or cut-off move sent the cut-offs to the end. The
nest file didn't store the position either, so reopening did the same.
RegenerateCutOffs now puts each cut-off back at its previous index (new
cut-offs go at the end), and CutOffDto.Sequence saves the index. Older
files without it load the cut-offs at the end, as before.
Every nesting-geometry consumer filtered only rapids, so scribe/etch
moves counted as part material. An etch tick that ends a hair outside
the outline (PEP bend ticks start on the notch edge) made the part
"open geometry leaving the material region": the job validator threw
and every built-in engine plus Gpt6Astra crashed on real PEP jobs
(PT75, drawing 4980 A01 PT77). Marks are only on the surface, so they
should never affect placement, collision, area, or validation.
- SpecialLayers.IsMaterial excludes Rapid and Scribe; used by drawing
area, canonical angle, part collision, PartGeometry, plate perimeter,
best-fit/pair evaluation, rotation analysis, GPU evaluators, and both
validators. Timing, display, splitting and posts still see marks.
- ConvertGeometry also maps the saved SCRIBE layer name to Scribe, so
programs rebuilt from stored entities keep their marks.
- NestReader repairs older files (e.g. PepNestExport output) whose
programs saved etch as cut moves while source entities kept SCRIBE.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
Entities now have a Guid Id for stable identity across edit sessions.
Drawing stores the full source entity set (SourceEntities) and a set of
suppressed entity IDs (SuppressedEntityIds), replacing the previous
SuppressedProgram approach. Unchecked entities in the converter are
suppressed rather than permanently removed, so they can be re-enabled
when editing drawings again.
Entities are serialized as JSON in the nest file (entities/entities-N)
alongside the existing G-code programs. Backward compatible with older
nest files that lack entity data.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add PlateOptions and SalvageRate properties to the Nest class and
round-trip them through NestWriter/NestReader via a new PlateOptionDto.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Material and thickness are properties of the nest (all plates share the
same material/gauge), not individual plates. This moves them to the Nest
class, removes them from Plate and PlateSettings, and updates the UI so
EditNestInfoForm has a material field while EditPlateForm no longer shows
thickness. The nest file format gains top-level thickness/material fields
with backward-compatible reading from PlateDefaults for old files.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Track preLeadInRotation when parts are rotated so lead-in removal
can restore the correct rotation. Remove stale HasManualLeadIns and
LeadInsLocked deserialization from NestReader since these flags are
transient state, not persisted data.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add MaterialLibraryResolver for Cincinnati post processor to resolve
G89 library files from material/thickness/gas configuration
- Add Nest.AssistGas property with serialization support in nest format
- Add etch library support with separate gas configuration
- Fix CutOff tests to match AwayFromOrigin default cut direction
- Fix plate info label not updating after ResizePlateToFitParts
- Add cutoff and remnants toolbar button icons
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Wire IDistanceComputer into RotationSlideStrategy, replacing inline
CPU/GPU branching. BestFitFinder constructs the appropriate implementation.
Replace PushDirection enum with direction vectors in BuildOffsets.
Rename IBestFitStrategy.Type and PairCandidate.StrategyType to StrategyIndex
for clarity (JSON field name unchanged for backward compatibility).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add verbose per-file and per-sheet-size console output during collection
- Skip already-processed parts at the sheet-size level instead of all-or-nothing
- Precompute best-fits once per part and reuse across all sheet sizes
- Clear best-fit cache after each part to prevent memory growth
- Save best-fits in separate bestfits/ zip entries instead of embedding in nest.json
- Filter to Keep=true results only and scope to plate sizes in the nest
- Set nest name to match filename (includes sheet size and part count)
- Add TrainingDatabase with per-run skip logic and SQLite schema
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Rename SizeDto.Height to SizeDto.Length so the serialized JSON
uses "width"/"length" which is more natural for plate materials.
The core Size struct still uses Height internally.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace three separate XML metadata files (info, drawing-info,
plate-info) and per-plate G-code placement files with a single
nest.json inside the ZIP archive. Programs remain as G-code text
under a programs/ folder.
This eliminates ~400 lines of hand-written XML read/write code
and fragile ID-based dictionary linking. Now uses System.Text.Json
with DTO records for clean serialization. Also adds Priority and
Constraints fields to drawing serialization (previously omitted).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move DxfImporter, DxfExporter, NestReader, NestWriter, ProgramReader,
and Extensions into a new OpenNest.IO class library. The WinForms project
now references OpenNest.IO instead of ACadSharp directly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
ajandClaude Opus 5.5