Prepare BOM rows for quantity editing:
- BomQuantity.TryParse accepts only a whole number of at least 1
(surrounding spaces allowed; no sign, decimal, exponent, separator or
overflow).
- BomPartRow keeps the BOM's own quantity (BomQty), refuses invalid
typed quantities in TrySetQuantity, and raises PropertyChanged for
Material, Thickness and Qty plus the status they affect, so a bound
grid can refresh.
- A blank BOM quantity becomes 1, as it was imported before, but is now
visible in the row and counted in the summary ("had no BOM quantity
(1 used)"). A BOM quantity below 1 is no longer imported as 0: the
row reads "Needs quantity" until the operator enters one.
BomImportFlowTests covers BOM items to rows to an edited quantity to the
group total and the created nest's required quantity. Mutation reds:
a zero floor, signed or decimal input, ignoring the quantity in the
status, not assuming 1 for blanks, setting unparsed text and dropping
the status notification each fail the Bom tests.
When two BOM rows named the same drawing file and shared a material and
thickness (the same part in two subassemblies), Create Nests imported
the file twice. Nest.Drawings is a set keyed by drawing name, so the
second drawing was dropped with its quantity: PT01 x2 plus PT01 x3
gave a nest needing 2, while the Groups tab showed 5.
Each drawing file is now imported once and needs the total of its
rows. Build_CombinesRowsThatUseTheSameDrawing required [2, 1] where
[5, 1] was expected against the previous commit.
Project Memory: 44293f97-a027-4c29-bc2d-bb789c796746
A BOM row with a file name and a matching drawing but a blank thickness
was reported "No DXF" and locked, so its thickness could not be entered
and the part was dropped: BomAnalyzer skips such items before looking
for a drawing, and the form only knew drawings the analyzer matched.
A row with a blank material read "Matched" but was silently left out
of every group.
Rows now resolve their drawing through a DrawingFileIndex shared with
BomAnalyzer (whose behavior and tests are unchanged), and a row's status
is computed from its values:
Ready | Needs material | Needs thickness | No drawing found | No file name
Rows with a drawing stay editable, and an edit updates the status cell.
Groups take only Ready rows (a zero, negative or non-finite thickness is
not Ready). The summary line counts ready rows and each problem.
Build_RowWithoutThickness_StillFindsItsDrawing failed at its DxfPath
assertion against the previous commit. Mutation reds: removing the
material check, accepting zero or non-finite thickness, skipping the
drawing for rows without thickness, and grouping without the status
each fail the Bom tests.
Project Memory: b8e3a978-2cfe-4fe7-b2a5-eb01c6c54679
A BOM row whose File Name carried its extension ("PT01.dxf") showed
"No DXF", was locked and was never imported, although BomAnalyzer had
found the file: the matched paths were stored under the raw BOM name
and looked up by the name without the extension. Both sides now use
the extension-less name.
The new BomImportRowsTests row failed at its IsEditable assertion
against the previous commit.
Project Memory: f3be7a4b-e679-470c-bb52-7057899228e4
Move the BOM import dialog's row building, grouping and per-group nest
construction out of BomImportForm into OpenNest.IO/Bom so they can be
tested on Linux:
- BomPartRow (now public) and BomImportRows.Build, a verbatim move of
the form's BuildPartRows (still via BomAnalyzer).
- BomImportGroups.Build: one grouping used by both the Groups tab and
Create Nests, which each carried their own copy. Create Nests now
creates nests in the Groups tab's order (material, then thickness).
- BomNestBuilder.Build: the nest for one group (saved defaults first,
then the group's plate size, spacing, material and thickness; one
drawing per row with the row's quantity, 1 when blank).
The form keeps the file dialogs, grids, EditNestForm windows and the
completion message. Behavior is otherwise unchanged; the two row-status
defects found while planning are fixed in the following commits.
PartQuantityReader parses a Parts worksheet (Part Name / Qty Required)
with exact-name matching and strict rejection of invalid, fractional,
negative, or duplicate quantities. Cut-only import drops case-insensitive
ETCH/SCRIBE mark layers before geometry so bend detection cannot
regenerate them. Tests cover both.
Repo-wide sweep with the pinned CSharpier 1.3.0 tool. Whitespace and
line-wrapping only; OpenNest.Engine.Tests (109) and OpenNest.IO.Tests
pass after reformat, full solution builds 0 errors.
Added .csharpierignore so csproj/config XML keeps its existing layout
(CSharpier's XML wrapping churns attributes with zero benefit).
Formatting is now enforceable: dotnet csharpier check . passes.
ACadSharp already includes DwgReader, so this wires it up across the
entire import pipeline — Dxf.Import, CadConverter drag-drop, nest
import dialog, console CLI, BOM analyzer, and training data collector.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
aj
