On a saved nest of the README sample parts (130 copies, 60 x 120, 0.3
spacing, bottom clamp rail) Auto Nest ended at 105.8 where a hand layout
of tidy bands ends at 103.1. Three things kept the banded fill from it:
- Lattice's first pattern for the 24 gussets set two columns 0.04 apart.
The band's certification rejected it and the band search stopped, so
the gussets had no band and filled the gaps as ragged columns. The
search now asks again just short of the rejected pattern
(BlockCatalog.RejectedBandLength).
- Building patterns is charged to the same work meter as the trials of
narrower and lower bands, and with the lower bands it spent the whole
budget, so the last types in the order never had a trial. Trials now
go round the types and may spend 25,000 work whatever the budget.
- A band taller than the height clear of the clamps lost members to
them. The first lower band is now asked for at that height and
searched like the full band; where such a band would stand whole in
place of one that loses members, the bands are searched a second time
with it there and the better sheet kept. A lower band no longer than
the full one stands first in its place, leaving a strip beside it.
That nest now ends at 103.1, the same parts built from the README DXFs
at 104.0 instead of 106.6, the help tutorial nest at 33.6 instead of
34.2; N26-2HH stays at 103.9 and the other benchmark jobs are unchanged.
Solves of these jobs take about a tenth longer.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Irregular decodes the job once more in full-height strips along X when
like parts group and every part shares one priority. A sheet that can
take all the remaining parts is packed two ways and the better kept:
- Bands: each type of three or more copies as its Lattice pattern in the
narrowest strip that holds all its copies, bands side by side, the
held-back copies and one-offs filling the gaps.
- Strips: each strip holds the largest remaining part, as its band or a
column one to three copies wide, every other part filling its gaps; a
beam of the four densest partial sheets carries strip to strip.
Band patterns are filled one grid unit wider than the spacing so a stack
of rings passes the strict certification, members on a clamp go to the
gap fill, and a short band moves flush to the far edge when that keeps
it off the clamps. The plan replaces the result only by beating it.
On seven sample parts (130 copies, 60 x 120) the layout ends at 102.9"
instead of 107.7", and at 104.6" instead of 108.6" with the desktop's
edge spacing and bottom clamp rail; at about twice the quantities the
second sheet ends at 104.7" instead of 106.2". Every other benchmark job
is unchanged. Solves of these jobs take about twice as long.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>