Stock can arrive up to 1.5 in wider than nominal, so only the origin-side
edge is certain. A cut-off with a head-locked overcut cuts past the nominal
far edge with the head height locked, covering the oversize. With that lock,
Plan Cutting may start the far-edge segment at the far edge: overcut outward,
rapid back still locked, unlock, cut toward the origin. Without it the
direction stays fixed, as decided in Project Memory a20ea455.
- CutOff.HeadLockOvercut / FarEdgeFirst, persisted in .nest; HEAD HEIGHT
LOCK/UNLOCK comment markers; far edge is quadrant-aware.
- Planner offers the reversed far-edge segment in the joint search, the
safest route and segment insertion; Apply records the direction.
- Cincinnati CL and CI Fiber posts gain lock/unlock code settings and refuse
head-locked cut-offs while either is empty.
- Automatic cut-off dialog setting (off by default, 1.5 in), kept between
sessions and used for new cut-offs.
Lock codes and machine behaviour with the head locked are unconfirmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the pre-post risks acknowledged, an unplanned blank reached the
Cincinnati and engraver posts, which created the output file before
refusing: an existing program at that path was emptied and the desktop
had no handler for the refusal. Both posts now check every part before
creating the file, and Post shows the refusal like the multi-file path.
A display tail marker is now honoured only as one marker ending the
part's own program, followed by a rapid and the outline alone. A marker
inside a sub-program or followed by real cuts is refused by posts and by
executed reads, so cuts after it can never be dropped from both
verification and output.
The posts treat every non-lead feed move as a cut, so an applied blank's
display tail, or the outline of a blank posted without a plan, would have
been cut along the blank's edge. The pre-post review counted that outline
as an ordinary cutting contour.
Cincinnati, CI Fiber and the engraver now read part programs through
DisplayPerimeterTail.ForPosting: an applied program posts exactly what the
same program posts with its tail removed by hand, and an unplanned display
perimeter is refused with a message that names the part and points to Plan
Cutting. The pre-post review reports the unplanned outline by name.
New post-processor plugin OpenNest.Posts.CincinnatiCIFiber for the CI
Fiber laser family (nLight CLX / Beckhoff TF5200 / Precitec ProCutter,
e.g. the CI Fiber 4020 8kW). Named by machine family, not table size.
Emits the machine program contract of the Cincinnati-supplied sample NC
(12992-4SS_NEST.nc): V.E.* header, restart jump, per-part V.E.R4 blocks,
per-contour N labels with V.E.R3, skippable /L macro lines (L0/L2+G41
interior, L4+G42 exterior, L6 cut-on, ZHSOFF cut-end), G162 incremental
arc I/J, trimmed 3-decimal spaceless coordinates, CRLF, M50/M30/%.
Contour classification (interior vs exterior) derives from the material
side of the closed cut path, not hardcoded winding. SubProgramCall holes
are flattened to sheet coordinates (rotation-safe). Arc lead-ins are
rejected per TF5200 13.2.4.1 (first motion block after G41/G42 selection
must be linear). Table envelope (default 160.25 x 81.25 in) validated.
Tests: structure golden on a square-with-hole nest, rotated-hole flatten,
coordinate format, arc-lead-in rejection, table validation, suppressed/
scribe skipping, plus a SkippableFact regression against the real sample
NC (109 parts, 2071 contours, L2=1962, L4=109, perimeter vertices match
within 0.001). Fixtures configure through OpenNest.Tests/test-config.json
and the regression skips when absent.
ajandClaude Opus 5.5