The best tab point used to land in inside corners: equally good points
run along a straight edge, vertices were tried first and the first tie
won. Operators cannot grind a nub flush there.
- SupportAnalyzer finds inside corners (inward-turning vertex runs of at
least 30 degrees, so chorded fillets count) and keeps tab points a
clearance from them; of equally good points it picks the one farthest
from an inside corner. Plan Cutting and the overlay use twice the tab
size; AcceptsTabAt rejects closer points
- When no steadying entry has a lead-in that fits, the search falls back
to entries clear of inside corners, then to every entry, each ordered
by how well the tab steadies the part, keeping only the steadiest that
fit
- Replay notes parts whose planned tab cannot hold them level or sits in
an inside corner; the notes are advisory and leave a Ready plan Ready
- Console/MCP plate summaries print a ready plan's notes
- docs/support-tabs.md and cutting-planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model the machine's support bed as a grid of contact points measured
from the plate origin, and check each part's center of gravity against
the convex hull of the grid points under its material. The bed is
extensible so straight and CAD-imported curved slats can follow.
- Core: SupportBed/SupportGrid, SupportMaterial and SupportAnalyzer
(margin with registration tolerance, best single tab point)
- Nest-wide support bed that every plate follows, saved in
plateDefaults.supportBed; machine defaults in support-grid.json
- CuttingParameters.SupportTabs: Plan Cutting tabs only unsupported
parts and limits their perimeter entries to points where the tab
steadies the part, falling back to any fitting entry
- Desktop: Nest > Support Grid..., View > Draw Support overlay and a
"Tab parts the support grid cannot hold level" tab option
- docs/support-tabs.md, nest file format and planner notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tools > Options > Cut planning effort (default 1.0, 0.5-10) multiplies the
desktop cut planner's per-plate expansion budget for both the free-order
search and the current-order retry. The budget counts expansions, not time,
so the setting is how faster hardware can be spent on hard plates.
The panel reads the setting on the UI thread and passes it to
CuttingPlanBatch.Capture; the worker never reads settings. The 1,000-
expansion first pass stays fixed: it is a cheap probe for easy plates, so a
higher effort only adds work where the full search runs. A plate refused
at the search limit now says the effort can be raised, without promising a
plan. The default keeps today's budgets and characterization digests.
Console, MCP and API do not run the cut planner, so they get no option.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Console --plan-cutting and MCP plan_cutting/apply_cutting_plan run the
desktop's CuttingPlanBatch: capture, plan, then an all-or-nothing apply.
Settings come from an explicit JSON file or the plates' identical saved
settings, never defaults. Unverified plans need per-call acceptance,
which is not posting consent. Console --no-fill plans a loaded nest as
is; a blocked plan exits 2 and saves nothing. Scrap cut-offs stay
desktop-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An attempt along a part order stopped backtracking after 8 x entries x
contours expansions without progress, with contours taken as the most of
any part on the plate. One many-holed part therefore let every blocked
part, even a two-contour tab, replay its predecessors' entries for the
whole of that allowance; a plate whose rounds each stalled that long
ran out of budget before the recovery pass that would have finished it.
Along an order the stall now uses the larger contour count of the blocked
part and of the part cut just before it, whose departure a retry changes,
capped by the old limit. The sequence-free recovery pass keeps the plate
maximum. Planning characterization digests are unchanged.
The optional private-fixture test now also runs RecoveryCuttingNestPath
with default lead-ins, and requires that file's plates to plan within
60% of their budget.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cut planner's directed-contour recovery pass gave up on plates the
full search could solve, so they ended "no plan found within the search
limit":
- Each hole was checked as an isolated probe that repeats the part's
scribes, so every hole-to-hole hop was checked as a detour through
the scribe start. Scribes and other open cuts are now checked once
from the arrival, and each hole as a direct hop from the one before.
- Hole entries were ranked only by pierce distance, so the departure
often ran back across the hole just cut. The nearest hole is still
tried first, but its entries that leave toward the holes still to
cut come first.
- The first-ranked outside entry could spend the whole recovery
allowance. Each outside entry now gets a share of what is left.
The optional private-fixture test now takes its config key, adding
RecoveryCuttingNestPath; it fails on the old search and passes now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A plate of at least 200 parts with no cutoffs or prerequisites, whose
part centres bin into rows and columns within a quarter of the smallest
part extent, is toured line by line in alternating directions. Each row
and column gap must be wider than that tolerance, each cell may hold
only one part, and at least a quarter of the cells must be filled
(interleaved rows fill half). The route runs along whichever axis, from
whichever corner, is shortest from the start point.
This replaces the travelling-salesman 2-opt/Or-opt passes, which took
about 8 s on 5,742 parts. It is still only a proposal: the joint search
checks every rapid and lead, and replans after a learned rule use the
general order. Smaller plates, and the characterization fixtures, keep
their order unchanged.
The washer nest's plate 1 now plans Ready in about 44 s (was 54 s), with
86k expansions against 91k.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With no lead-out the tool leaves a hole where it entered it. A tiny corner
arc's midpoint lies on both facing sides of its hole, so the ranker scored it
as an ideal two-side corner, but the tool leaves it along its 45-degree
tangent: a shallow rapid to a nearby next hole re-entered the corner and
crossed the hole just cut. Every outside endpoint's preferred hole chain
then failed the same way, and the reorder search spent its budget on full
backtracking. A 31-part plate of such parts needed 31,959 expansions
against a default budget of 20,000.
Hole entries whose straight rapid to the next pierce clears the hole itself
now rank first, in the preferred chain and in the full search. This is a
stable reorder only: no entry is dropped, and every emitted rapid is still
checked. That plate now plans Ready on its first preferred pass, using 7,781
expansions; the budget is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PEP-converted incremental programs round every move, so a long contour
can end 1-1.4e-6 off its start. Material capture refused it as open
("blocked: unsupported geometry"), and a gap right at the 1e-6 boundary
could pass material capture yet fail preparation.
On the planner's owned clean copy only, close incremental contours whose
gap exceeds 1e-8 but stays within what their rounded moves could
accumulate (capped at Tolerance.Epsilon); the next motion absorbs the
correction so nothing later moves. Absolute programs, larger gaps and
the drawing itself are untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pinned-lead and locked-lead warnings named a Drawing Pins Off command and a
Clear Lead-ins command that the desktop does not have; name Plate > Remove
Lead-ins and spacing instead. Closing Plan Cutting no longer claims nothing
changed after lead-ins or cut-offs were cleared, the no-stock reason no
longer says the part is larger than every sheet when only the usable area at
the checked rotations is too small, and the console says whole-job engines.
The best-effort fallback (used whenever a part has touching or uncertain
material boundaries, which sends the whole plate there) cut each part's holes
in raw source order with the nearest entry. On hole grids that order
doubles back, so the rapids between holes cross; any crossing means a
shorter uncrossed order exists. On A0228-01 plate 1 this cost ~300 in of
rapid travel and drew crossing rapids on PT08 in the simulator.
Tour the holes with CuttingHoleOrder (the nearest-neighbour + 2-opt/Or-opt
proposal the strict search already uses), as an open path from the arrival,
perimeter still last. Hole-centre selection is shared with the strict search.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Classic sequencing honored Drawing.CutFirst, but the cutting planner built
its own order from the dependency graph and ignored it, so test coupons
interleaved with the rest of the plate. Each cut-first part is now a
prerequisite of every non-cutoff part, except a part nested in its cutout,
where containment wins so the graph stays acyclic. A kept order that cuts
a part before a coupon reports the cut-first conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a pierce diameter set, a perimeter none of whose configured lead-ins keeps its pierce
clear (a lead shorter than the zone radius, or neighbours closer than it) was only rejected.
Plan Cutting now looks for a pierce in the open scrap around the part instead.
- ScrapPierceSearch (Engine): the window four zone radii around the part, minus every nearby
part's clean material grown by the zone radius and a margin (ClipperBridge, conservative
flattening); the clear point nearest each ranked perimeter entry is a candidate. Other
parts' cutouts count as scrap, the part's own holes do not. With no clear scrap, the
PolyLabel pole of the free scrap is the best effort, and its shortfall is reported.
- ContourChoice.Pierce / PreparedContours.ScrapPierceEntry: the planner's choice carries the
pierce; the emitter cuts a straight lead from it to the nearest perimeter point and still
reads nothing but the contour and the choice.
- Every candidate passes the lead validator like any planner-chosen entry; pinned perimeters
keep their pins and warn. Without a pierce diameter nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Thick plate pierces leave a crater wider than the kerf. CuttingParameters.PierceDiameter
(Cutting Settings > Pierce Diameter, 0 = off) requires every lead-in pierce to keep half
of it from all part material: its own contour, its holes and every other part.
- LeadPathValidator checks the zone during Plan Cutting candidate checks and final
replay; fixed emissions warn as usual. No-fit findings explain the zone.
- PierceZoneReview reports Pierce zone warnings before posting for leads from any source.
- Holes whose configured pierce is inside the zone move it toward the hole's PolyLabel
pole (round holes: the centre), as close to the contour as the zone allows; a hole
too small for the zone is pierced at its pole and the shortfall is still reported.
- Straight corner leads and round-hole clamping use the larger of PierceClearance and
the zone radius. The manual lead-in preview shares the Core rules.
- Persisted through the DTO, owned copies and state fingerprint.
Perimeter fallback is not included; see docs/geometry/pierce-zone.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Staged cut-offs were appended after every part, so a kept order (the
"Keep the current part order" option, or the fallback after a free
search runs out of budget) always conflicted with any cut-off crossing
a part. PlateSequencing.PlaceCutOffs moves each new cut-off to just
before the first part it crosses, separators last, without moving
anything else; the panel applies it after staging.
The free search also learned "cut the cut-off first" only after a full
stall, re-planning the many-holed parts before it. A cut-off is a fixed
program that never gets harder to cut earlier, so a crossing approach
into a non-separating cut-off now teaches that rule at once. On the
reported 35-part plate this drops the plan from 23,930 expansions (over
the 20,000 budget) to 15,605.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A converted outline whose seam closes within the admitted 1e-6 gap could
only be entered at its seam: entered anywhere else, the arc after the
seam started off its own circle and every emission was refused as an
inconsistent radius. The search then spent its whole budget on that
part and the plate never planned. Emission now bridges the gap with a
straight move and cuts the arc as drawn; the verifier already admits
that slack. An entry on the seam vertex is left as before.
Each prefix of a part re-checked its earlier contours' leads against
every other part's material. One search now remembers each verdict by
the lead curve's exact bits and the material's reference, charging the
same native query budget; replay never uses it. On the reported plate
the memo alone gives a byte-identical result in 57 s instead of 12 min 47 s;
with the seam fix the plate plans Ready in about 17 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A hole can now be declared a tabbed cutout in the CAD Converter: pick a
circle or any edge of a closed hole, set the tab count and width, and drag
the tabs around the hole. The definition persists on the drawing and in the
nest file, and stays editable from the source entities.
The builder replaces the hole with open cut pieces and uncut spans on a new
Tab layer. Tabs are material, so area, nesting and overlap checks still see
a closed hole, but they are never cut. Plan Cutting and Assign Lead-ins cut
each piece from the slug with the internal lead-in and no lead-out. A lead
that would reach back over a tab is mirrored, and an arc lead onto an arc
pierces straight in. Planning accounts for each span between tabs and runs
the open-cut proof, so its own tabbed cutouts certify; tabs followed by a
lead-out are still refused. Pre-post review flags programs that still
contain tab motions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Breakoffs are now picked by their joining line, default to the smaller side as scrap
(flippable), and cut that line between tabs on a new Break layer instead of slots.
Plan Cutting and Assign Lead-ins enter each cut from the scrap with the nest's internal
lead-in, or pierce on the line without one; checks treat break cuts as intentional open
cuts that are not material.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Posting review now proves containment exactly as the cutting planner does
(shared NestedPartContainment) and warns when a nested part is cut after its
host (NestedCutOrder) or when a host's hole lead or the nested part's lead
meets the other's material (NestedLead), including subprogram hole poses.
Ambiguous containment is incomplete, never clear; fixed-lead motions are not
reported twice. A committed cutout preview warns until Plan Cutting cuts the
insert first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 5.5 pinned-entry shortcut in ContourEntryFeasibility looked up the
choice's contour before the probe's own validation, so an owned choice with
an out-of-range contour ordinal threw instead of returning Incomplete as it
did before. The lookup now runs only for an ordinal inside the preparation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A drawing-pinned contour is now a fixed emission like a locked program. A
regenerated placement maps its execution motions onto the emitted contour
choices (one group per choice after the program's scribes, opened by its
rapids) and owns as fixed the lead-in, cut, lead-out and tab of every pinned
contour; the rapids between contours, including the one into a pinned
contour, stay the planner's and strictly checked. If the motions do not
split cleanly into one group per choice, nothing is treated as fixed.
So a pinned lead that meets another part's material or its own part's no
longer rejects the candidate: the feasibility precheck accepts a pinned
entry as given, the search keeps it in place, and replay reports a FixedLead
warning naming the part, cutting contour, pin and the part hit, with the
advice to increase spacing or switch off drawing pins for the part. The
plate is UNVERIFIED and needs acceptance; the lead is never shortened and
the entry never moved. The unpinned control and the same plate with pins
off are Ready.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Capture now honours a placement's pins only while they are active: a part
with DrawingPinsOff plans from the plate settings with no warning (D1's
per-part escape hatch), and Part.HasActiveDrawingPins is the shared test.
A pinned part is regenerated like any unlocked part whatever lead-ins or
settings it carried. A locked part with active pins keeps its exact program
and warns "Locked lead-ins override drawing pins on part N; Clear Lead-ins
to apply the pins." instead of being refused; an unlocked part a caller left
ineligible warns that its pins are not applied.
Apply's freshness record now holds each drawing's pin list (reference and an
explicit StateFingerprint of every pin's point, leads and tab) and each
part's pins-off flag, so editing either after capture returns Stale. The
fingerprint writer is shared between settings and pins; a reflection test
pins ContourCutPin's public surface to what the fingerprint covers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PreparedContours.Capture(program, parameters, pins) takes CutPinResolver
results for the same contours and fixes every resolved pin's contour: its
one and only entry is the pin's point, and it is emitted through the
existing emitter with the pin's own lead-in, lead-out and tab (angle
rounding off, so the entry never moves). Every catalogue returns the pinned
entry alone and emission refuses any other entry for that contour, so no
search path can relocate it. The certified tab size is the pinned outside's
own, so a pinned tab gap is genuine and replay certifies it. Unpinned
contours keep the shared settings and automatic selection; without pins the
existing preparation is untouched (5.1 digests unchanged).
Capture now resolves a regenerated part's drawing pins. A pin that does not
resolve (not on a contour, on several, sharing one, or unplaceable) is never
guessed: its contour stays automatic and the plate gets a FixedLead warning
naming the pin, making the proposal UNVERIFIED. A tab pinned on an internal
contour cannot be cut as pinned (only the outside is tabbed) and warns the
same way. Pins-off, locked parts with pins and freshness follow in 5.4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
D1a (user, 2026-10-14): one locked cutout must not refuse the whole layout.
With confirmed parameters a locked program is now a fixed emission, accepted
as given. The replay checker and the lead validator take a per-motion owner:
a violation inside the fixed emission (a lead meeting another part's or its
own material, a rapid inside the locked program crossing a cut contour, an
uncertifiable tab gap or a partial/reversed/retraced cut) is recorded apart
instead of failing the candidate. The search never rejects or learns an order
rule from them, so fixed emissions never steer it; the planner's rapid into
the locked program and every regenerated lead keep every strict check.
Replay turns those violations into typed FixedLead findings that name the
part, contour and the part hit. A plate whose only findings are these is
BestEffort with IndependentlyReplayed set: never Ready, applicable only with
the per-proposal acceptance, and CuttingPlanService.Apply still rejects it.
Overlap, unreadable programs, stale input and cancellation still block, and
unlocked programs a caller left ineligible and the no-parameter route keep
refusing as before.
Pre-post review now re-checks locked leads against every part's clean
material, so the same violations reappear before posting.
Existing tests that encoded the old locked refusal now assert the warning;
two batch tests that used a locked crossing as their hard block use an
overlap instead. The 5.1 digests are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plan Cutting findings dropped the checker's geometry, so selecting one could only
zoom to part extents, and overlap-blocked plates (no preview) did nothing at all.
Findings now keep the check's world-coordinate witness (overlap regions, rapid,
contacts); selecting a row draws it with the Validate Nest overlay, on the proposal
or a blocked plate's live sheet. The witness is excluded from finding equality so
repeated search rejections still collapse to one finding.
The side panel's scrolling report was a wall of text operators skipped. It is now
a colored outcome line, one line for the shown plate, and one remedy or marker
hint above the issue grid, with secondary detail moved to tooltips.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plan Cutting previews were built without the plate's clamp zones, so
machine clamps disappeared from the canvas while inspecting a proposal.
Copy the plate's immutable zones onto the detached preview; it does not
follow the rail, so it never re-resolves.
Review finding 8, Project Memory 4e5f566d.
Nests converted from another CAM system carry its seam overcut inside the
clean contour: the last cut runs on past the contour's own start along its
first cut, then a straight jog returns to the start. The ring then touches
itself at its seam, so neither the cutting planner nor the overlap analyzer
could certify it and the whole plate refused.
SeamOvercut recognizes exactly that shape (same line, or same circle and
direction) and trims it from an owned copy; the retraced tail encloses no
area, so material is unchanged and the drawing is never edited. Any other
self-contact still refuses. Arcs of one circle whose centers were each derived
from their own endpoints agree only within Epsilon, so their spans are now
compared at the seam tolerance: shared spans still refuse as overlap, while
arcs that only meet at a joint or lie apart no longer do.
Plates with parts nested in other parts' cutouts then failed to route, since
the host is cut last and every straight approach from the middle of a crowded
cutout crosses a finished neighbour. CuttingNestedOrder tours each host's
inner parts as one run ending beside the host's own contours, hosts follow
the parts beside them, and learned rules still win. Outside entries are
ordered by clear sight lines to the next cut, the look-ahead toward a host is
its nearest contour point rather than its centre, a cutout containing the
arrival point is routed from that point, and a pass that teaches an order
rule ends the round instead of repeating the blocked approach.
Tests: SeamOvercutTests and CuttingNestedOrderTests; the cutting-planning,
diagnostics and overlap tests in OpenNest.Tests pass (1023 passed, 6 skipped).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Report, dialog and diagnostic text across post verification, cutoff
planning, alignment and cutting-plan review repeatedly told the user
what checks weren't (safety certifications, proof, guarantees) instead
of what to do. Reworded these to state the same caveats affirmatively
(inspect X, confirm Y, review Z) without changing the underlying
safety guidance, and updated the tests/docs that pinned the old wording.
PreferredContourEntries resolves one entry per hole by walking the
proposed hole route BACKWARD from the already-chosen perimeter entry.
Each hole ranks against the downstream contour's ACTUAL emitted pierce
(first non-rapid motion of the owned probe emission, native rounding
included), so the cut chain flows toward the outside start rather than
chaining on nominal points that rounding may move.
Catalogue is the S04 merged list (preferred kinds where present,
compass/arc fallbacks otherwise — pure circles included); ordering is
the S05 facing/tier/travel ranker; feasibility is one S08-bounded pick
per hole through caller-supplied S07 verdicts. A hole with no feasible
candidate yields an explicit no-preference proposal naming the contour
and reason — never a silent skip, never a partial chain. Arrival proxies
(part arrival for the first hole, previous hole centre otherwise) keep
the pass deterministic and circularity-free.
Deterministic (repeat runs identical), cancellation-aware, ownership-
checked, source program untouched, fresh owned probe programs only.
This is a recommended-v1 proposal: nothing is installed into the search
and no rapid is certified here — S12 wires it and must handle a blocked
preferred rapid.
Tests: circle pair flows hole->hole->outside via actual pierces (each
pierce strictly nearer downstream than the opposite compass pierce);
rectangular holes pick right-facing corners under all-clear evaluation;
blocked ideal candidate falls back to next-ranked on the same hole;
blocked hole yields honest no-preference finding; permutation integrity
in route order excluding the perimeter; determinism; foreign perimeter
refused; cancellation; fingerprint/ownership/fresh-program invariants.
Gate 9/0/0; full Core 3580/25skip/0; cross-build 0 errors; scoped
format verify 0; facing-drop and silent-skip mutants killed; nominal-
vs-actual-pierce mutant documented near-equivalent.
CuttingHoleOrder proposes the cut order of a part's remaining holes as
an OPEN path arrival -> every hole centre exactly once -> the fixed
perimeter entry, reusing CuttingPartOrder's bounded nearest-neighbour +
2-opt/Or-opt machinery (no exhaustive permutations, no new routing
invention). A proposal only: the search still certifies every rapid and
emitted lead; nothing is installed into the search yet.
CuttingPartOrder gains an optional endpoint: the terminal edge joins
EVERY improvement delta (2-opt tail edge on both sides; OrOpt gap to the
open end measures the endpoint distance), so heuristics see route moves
that re-point the path at the entry rather than only final scoring. No
endpoint keeps whole-part semantics byte-identical (control test);
precedence, prerequisites and tie policy unchanged.
Tests: empty/one hole; asymmetric fixture where the endpoint changes the
ORDER (open route ends at C, entry-facing route ends at B) with each
route asserted equal to its brute-force optimum computed from
coordinates; permutation integrity excluding the perimeter; random 7-set
within 1.05x brute force; deterministic tie order; cancellation; legacy
no-endpoint equality. Mutants dropping the terminal edge from OrOpt or
TwoOpt deltas are killed.
No-hole parts now choose the outside entry through the S03-S08 pipeline
at the part boundary: rank the native catalogue toward the NEXT cut's
placed-material centre, lazily certify each emitted lead with the shared
validator, cap at maxEntries with side coverage. The next cut is the
next unfinished part on the supplied order (re-read after every
learned-order replan) or, in sequence-free fallback, the nearest
dependency-ready remaining part with stable ordinal ties; the last part
has no target and ranks by tier then arrival distance — never the plate
origin. Target and arrival are converted to prepared LOCAL coordinates
exactly once; geometry is already rotated.
The look-ahead rank survives Follow's ordering: children sort by
nearest source first (the sequence-free tour stays nearest-first), then
contour, then the selection rank — plain OrderBy(Distance) can no longer
undo the facing. Measured fixture (three squares, 0.15 leads, origin
start): legacy cut every sheet at its arrival-nearest lower-left corner
with 10.5-unit cross-sheet rapids totalling 21.0; look-ahead cuts the
+X-facing corner with the same 21.0 total but each inter-part rapid now
starts at the facing edge instead of trailing across the whole sheet.
Uncertain validator answers are never precheck-refused: they skip the
selected slots but flow to the emitted-prefix Check and complete replay,
which stay the authority — a refused-looking incomplete is reported,
not hidden. A fully evaluated catalogue with no fitting lead surfaces
'No tested lead-in fits on part N, contour M'; budget exhaustion stays a
budget finding. Lead prechecks count separately from DFS expansions; the
pipeline itself is one counted expansion per contour. Full backtracking,
dependencies, locked/fixed programs, cutoff handling, emitted-prefix
Check and complete replay are unchanged; budgets and CuttingPartOrder
untouched. Hole parts keep the legacy path until S12.
ajandClaude Opus 5.5